Herefordshire · England
Bath Repair in Stoke Cross
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Stoke Cross and across Herefordshire. Free, fixed quotes from your pictures.
- Repairs from £95
- An old repair that has yellowed or come loose
- A cracked acrylic bath
How it works
The work is clean and fairly quiet, so you can stay at home while we’re there. We protect the area first, then the work takes a few hours, depending on the damage. At the end we talk you through the curing time and the aftercare.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Mention any parking restrictions or tricky access
- Keep pets and children out of the room while we work
- Tell us about any previous repairs or coatings
Getting a price
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Related advice
Bath repair at your home in Stoke Cross
Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles are not touched, and the finish is matched to the rest of the bath. Typical jobs include a hole punched through by something heavy and rusty patches near the plughole, across whirlpool & spa baths, roll-top & freestanding and cast iron enamel.
All of our repairs are guaranteed for twelve months, and the guarantee is the same wherever you live. If something goes wrong with the work, we come back.
- Location
- Stoke Cross (HR7)
- County
- Herefordshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
What we can’t put right
Not everything can be repaired, and we’d rather say so up front. Repairs won’t solve:
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
- Wear across the entire surface, which needs re-enamelling
Send us pictures and we will tell you honestly before you book.
Surfaces we repair
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
How we price bath repair
Prices start from £95. You’ll know the full cost before you book. We take into account:
- How hard the colour is to match
- What the surface is made of
- Where the damage is and how we get to it
- Whether it’s a chip, crack, burn or wear
There are no surprise extras on the day. What we quote from your pictures is what you pay, unless the damage turns out to be different, in which case we talk to you first.
Send photos for a quote
The better the pictures, the more accurate the price. Here’s what we find most useful:
- A clear, close picture of the problem area
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- Details of any past repairs
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. Compared with replacing, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Why Stoke Cross clients choose us
- Nothing taken out or refitted
- Fixed prices from your photos
- Every repair guaranteed for a year
- Repair technicians who travel to you, UK-wide
See our prices page and guide to resurfacing and replacement costs.
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it won’t stop us repairing it. It does add a little time, so tell us about it when you send pictures.
If you do try a kit, read the instructions carefully and work on a clean, dry surface, and give it the full curing time. If it fails, we can still put it right.
Landlords, agents and businesses in Stoke Cross
If you manage property in Stoke Cross, we can repair and quote for several addresses together. Send pictures for each one and we will come back with a combined price.
Builders use us to fix snagging damage before handover. Several plots can be done in one visit to keep costs down.
Where we work around Stoke Cross
Stoke Cross is about 10 miles north-east of Hereford, in Herefordshire. Our work suits any type of property, old or new, large or small, as well as offices, shops and holiday lets. We work in all 255 towns and villages across Herefordshire. Our jobs stretch from Stoke Cross to Birmingham (about 35 miles away).
All of HR7 is covered. From Woodland View and Westbury or anywhere nearby, we can come to you. Other places close to Stoke Cross include Stoke Lane (1 mile east), Much Cowarne (2 miles south), Pencombe (2 miles north-west), Bishops Frome (3 miles south-east) and Bromyard (3 miles north-east). Within a short drive, we also cover Hereford (10 miles south-west), Ledbury (9 miles south-east), Leominster (10 miles north-west), Redhill (11 miles south-west), Newton Farm (11 miles south-west) and Whitecross (10 miles south-west).
Local landmarks in Stoke Cross
Our clients here include homes close to Plough Inn and Church of St Peter and St Paul. Nearby you will also find Bromyard Community Hospital (3 miles north-east) and Dunder Camp and Upper Town Mound (2.6 miles west).
FAQs for Stoke Cross
Do you work in Stoke Cross?
We do. We send a technician to Stoke Cross for every job, and the price is the same as everywhere else.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
How quickly can you book me in?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
How long before I can use the bath?
Most baths can be used the day after. We will tell you the exact curing time when we finish.
Do you work for landlords and businesses?
We do, regularly. We can quote for several properties together and work between tenancies.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It’s covered by our one-year guarantee.
Do I have to be there?
Yes. We need access to the room while we work, at a time we agree with you.
Places near Stoke Cross
What else we do in Stoke Cross
Aftercare tips
Most damage we see is avoidable. These habits help:
- Give the bath a quick rinse after use
- Have new chips seen to early
- Avoid scourers, wire wool and gritty cream cleaners
- Store metal items away from the bath
Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.
If water is getting through a crack, stop using the bath until it’s repaired. Water under the bath can damage the floor and the ceiling below.
Repairs by material
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
