West Sussex · England
Bath Repair in Broomershill
Bath repair for Broomershill, without a refit. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Rusty patches near the plughole
What affects the price in Broomershill
Repairs from £95. Every quote is fixed and free. What we look at:
- Doing more than one item at once
- The size and number of damaged areas
- The material and finish
- The type of damage
Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Getting a price from pictures
Two or three clear pictures are generally enough. Try to include:
- Your postcode, so we can check dates
- Natural light rather than flash
- Details of any past repairs
- What it’s made of, if you know
There is no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Bath repair in Broomershill without replacing anything
A damaged bath does not have to mean a new bathroom. We fill the damage, shape it to the curve of the bath and refinish it, mixing the colour on the day so the repair is hard to spot. If you are dealing with chips under the taps and scratches you can feel with a fingernail, we can help.
Your repair is guaranteed for a year, as with every job we do.
- Where
- Broomershill (RH20)
- Region
- West Sussex
- Cover
- One year on every repair
- Price
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repair or replace in Broomershill?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Prices start from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why book with us
- Colours mixed by hand to suit your surface
- Straight answers about what a repair can do
- Technicians who travel to you, UK-wide
- Rooms protected and left tidy
See our pricing or resurfacing vs replacement cost guide.
Aftercare tips
So the finish stays in good condition:
- Have new chips seen to early
- Make sure an acrylic bath is firm underfoot
- Store metal items away from the bath
- Rinse it down after each bath
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
Where we work around Broomershill
Broomershill is about 10 miles south-west of Horsham, in West Sussex. Jobs in Broomershill are booked in like any other job: a fixed price from your photos, and a technician at your door on the day. Our repair technicians cover 371 places across West Sussex. Our jobs stretch from Broomershill to London (about 41 miles away).
Every address in RH20 is covered, from the main roads to the quietest streets. Nearby, we also work in Codmore Hill (1 mile north-west), Marehill (1 mile south-east), Nutbourne (1 mile south-east), North Heath (1 mile north) and Gay Street (1 mile north-east). Larger places within reach include Horsham (10 miles north-east), Worthing (11 miles south), Bognor Regis (15 miles south-west), Chichester (15 miles south-west), Littlehampton (11 miles south) and Shoreham-by-Sea (13 miles south-east).
Near you in Broomershill
Typical jobs here are in homes near The Red Lion Public House, The Parish Church of St Mary and St Mary's Church of England Primary School, among other places. Broomershill’s nearest station is Pulborough station, roughly 1.3 miles south-west of the centre. Further afield, we also cover the area around Coates Castle (4.4 miles west) and The Storrington And District Museum (3.8 miles south-east). Open spaces near Broomershill include The Mens.
What we do, step by step
When we visit, we arrive at the time we’ve agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, normally the day after.
Preparing for the visit
- Let us know which floor the room is on
- Tell us about parking, stairs or access
- Point us to the nearest place to park
Getting a price
For a price in Broomershill, the easiest route is photos: a close-up, a wider shot and your postcode. We reply with a fixed quote and our next available dates.
Related advice
What we are called out for in Broomershill
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the base flex until it cracks.
People usually call us after spotting one of these:
- Rust spots around the plughole
- A kit repair that didn’t last
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
Before you book anyone
- What happens if the damage is worse than the photos show
- How long it needs to cure
- What aftercare is recommended
- How your room will be protected
Work for landlords and builders
We work for landlords, letting agents and housing providers in Broomershill as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.
Hospitality businesses need rooms back in use quickly, so most of our work is done in a single visit. We can work around your bookings.
Nearby places to Broomershill
Other services in Broomershill
Broomershill: your questions answered
Is a repair better than a new one?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
What about rust by the waste?
Yes. We remove the rust and loose enamel, seal and fill the area, then colour-match the finish.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair several things at once?
Yes. Doing several items on one visit normally costs less than separate visits. Include pictures of each item.
What happens next?
We review the photos and send a fixed quote and the next dates we have.
How do I book?
Use the quote form or ring 0345 017 0787, and we will do the rest.
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We will let you know when it’s safe to use again.
Do I need to be at home?
Yes. We need access to the room while we work, at a time that suits you.
Can I fix it myself?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
When we would advise against a repair
A repair isn’t right for every job, for example:
- Cracks in acrylic we cannot reach from underneath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A steel bath rusted through
Send us photos and we’ll tell you honestly.
Surfaces we repair
- Acrylic
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
About our accreditations · Every repair comes with a one-year guarantee.
