East Riding of Yorkshire · England
Bath Repair in Broomfleet
Damaged bath in Broomfleet? We repair it in place, match it on site and back it with a one-year guarantee.
- Repairs from £95
- Chips on the rim or sides
- Cracks in an acrylic bath
About Broomfleet
Broomfleet is about 9 miles east of Goole, in East Riding of Yorkshire. Whether you’re in the middle of Broomfleet or on the outskirts, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Our technicians cover 299 places across East Riding of Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 36 miles away.
Every address in HU15 is covered, from the main roads to the quietest streets. That includes homes on Main Street, Chapel Garth and Landing Lane. If you’re just outside Broomfleet, we cover Faxfleet (2 miles south-west), Whitton (2 miles south-east), Newport (3 miles north-west), Ellerker (3 miles north-east) and South Cave (3 miles north-east). We also work in nearby towns such as Beverley (12 miles north-east), Goole (9 miles west), Pocklington (14 miles north), Hessle (9 miles east), Cottingham (10 miles east) and Market Weighton (9 miles north).
What’s near Broomfleet
Around Broomfleet, we work in homes near Church of St Mary. The closest station to Broomfleet is Broomfleet station, roughly 0.5 miles north-west. A little further out are Cave Castle (3.2 miles north-east). Open spaces near Broomfleet include Blacktoft Sands RSPB reserve.
Bath repair in Broomfleet without replacing anything
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair whirlpool & spa baths, acrylic and roll-top & freestanding, and people most frequently call us about a cracked acrylic bath and chips along the edge of the bath.
We stand behind the work with a one-year guarantee.
- Area
- Broomfleet (HU15)
- Region
- East Riding of Yorkshire
- Guarantee
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What we do, step by step
It’s a tidy, low-fuss visit. We agree the arrival time in advance, protect the area, and get on with the job, which normally takes a morning or an afternoon. If we find something your photos didn’t show, we’ll explain it before carrying on.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- The colour is tinted by hand until it matches.
- Finally, it’s polished to match the shine and left to cure.
Before we arrive
- Let the surface dry out before the visit
- Keep children and pets away from the room on the day
- Let us know which floor the room is on
Ask for a price
There’s no need for us to visit first. Photos are enough for us to price nearly every job: we need a close-up, a wider picture and your postcode, and we’ll come back to you with a fixed figure.
Read more
Can I fix it myself?
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Broomfleet questions
Will the price change on the day?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you redo an old repair?
Yes, we do this often. We strip it out, deal with any rust and repair it again.
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Can you redo someone else’s repair?
Most of the time. Tell us what was done before and we will plan for it.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
What does bath repair cost?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before you book.
Towns and villages near Broomfleet
What else we do in Broomfleet
Work for landlords and builders
We work for landlords, letting agents and housing providers in Broomfleet as well as householders. A repair between tenants keeps the property empty for less time, and it normally costs far less than a refit.
We regularly work with letting and managing agents. Just send photos, the address and how to get access.
Repairs by material
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so repair chips early.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, so it’s always worth repairing.
How to look after the repair
Good habits make a big difference to how long a repair lasts:
- A dripping tap stains enamel, so fix it early
- Do not leave a fresh chip for long
- Do not leave razors or cans standing in the bath
- Put a towel in the bath if you are working above it
A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Prices and what affects them
Prices start from £95. You won’t pay by the hour. The price is based on:
- How hard the colour is to match
- The size and number of damaged areas
- Doing more than one item at once
- What the surface is made of
A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Getting a price from photos
You can take the photos on your phone, there’s no need for anything special. Just ensure we can see:
- Something in shot to show the size
- Whether it’s been repaired or coated before
- A photo taken from further back
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Honest limits
Some problems need a builder, plumber or fitter rather than us:
- A bath that moves underfoot, until its support is fixed
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
Common problems we fix in Broomfleet
A bath gets knocked about more than you’d think: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Sooner or later, most baths pick up a chip.
The things clients generally mention when they call are:
- Rust by the waste and overflow
- A chip where the taps sit
- A failed DIY repair that is discoloured or lifting
- Impact holes in acrylic
Questions to ask before you book
- What aftercare is recommended
- How soon you can use it again
- Who will actually do the work
- How the room is protected while they work
About our accreditations · Every repair comes with a one-year guarantee.
