North Lincolnshire · England
Bath chip & crack repair in Whitton, North Lincolnshire
Our repair technicians come to Whitton for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Chips caused by builders
- A kit repair that didn’t last
DIY kit or professional repair?
It’s natural to want to try a repair yourself. The trouble is that kit repairs frequently look fine at first and then fail, and then the old filler has to be removed first.
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
About our bath repair in Whitton
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the following day. We work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are hairline or through cracks in acrylic and chips under the taps.
All our work is covered by our one-year guarantee.
- Where
- Whitton (DN15)
- County
- North Lincolnshire
- Cover
- One year on every repair
- Price
- From £95. Free and fixed, from your photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Prices and what affects them
Prices start from £95. Every quote is fixed and free. What we look at:
- Previous DIY repairs that have to come out
- Where the damage is and how we get to it
- How many areas need work
- The type of damage
The price reflects the work involved, not your postcode. The full price is agreed before you book, with nothing added on the day.
Getting a price from photos
Good photos mean an accurate price. Here’s what helps:
- Any earlier repairs or coatings
- Your postcode, so we can check dates
- Natural light rather than flash
- Any details about the material
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, add your postcode and send them to us. You’ll get a fixed quote, not an estimate.
Whitton and nearby
Whitton is about 10 miles north of Scunthorpe, in North Lincolnshire. Jobs in Whitton are booked in like any other job: a fixed price from your pictures, and a technician at your door on the day. Whitton is one of 90 towns and villages in North Lincolnshire where we work. Our jobs stretch from Whitton to Leeds (38 miles away).
We work across DN15. Jobs here include addresses on Main Street, Old Mill Lane and Church Hill and the roads around them. We also travel to Broomfleet (2 miles north-west), Faxfleet (2 miles west), Ellerker (3 miles north), South Cave (4 miles north) and Newport (5 miles north-west). Further out, we also cover Scunthorpe (10 miles south), Barton-upon-Humber (8 miles east), Bottesford (11 miles south), Brigg (12 miles south-east), Frodingham (8 miles south) and Crosby (8 miles south).
Landmarks near Whitton
Locally, our jobs take us to homes close to Church of At John and the streets around them. Whitton’s nearest station is Brough station, about 2.7 miles north-east of the centre. Nearby you’ll also find Cave Castle (4.3 miles north). For a walk, there is Blacktoft Sands RSPB reserve.
What happens on the day
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, and get on with the job, which typically takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- Finish coats go on, then the repair is polished to blend in.
- We leave it to cure; you can normally use the bath the following day.
Before we arrive
- Move bottles, mats and clutter away from the area
- Ensure the area is dry
- Mention if the room is upstairs or in a flat
How to get a price
If you’re in Whitton and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Related advice
When we would advise against a repair
We would rather lose a job than do one that won’t last, so these are the limits:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Leaks from the waste or overflow fittings (a plumber’s job)
- Metal that has corroded all the way through
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
How to look after the repair
Nothing complicated is needed:
- If an acrylic bath flexes, have its feet adjusted
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse the bath after use, especially in hard water areas
- Don’t leave a fresh chip for long
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so it’s worth getting them done early.
Landlord and trade work in Whitton
For developers and builders, we fix damage before handover, so there is no need to replace a damaged item at the last minute. We can visit several plots in one trip.
We work for landlords, letting agents and housing providers in Whitton as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Whitton questions
Can you repair something that’s been repaired before?
Normally, yes. We remove the old repair before doing a new one, so let us know about it.
What happens once I’ve sent photos?
We check the damage, the material and your postcode, then reply with a quote.
Will I be able to see the repair?
On a glossy bath, you will struggle to find it. On worn enamel, it can look shinier than the rest.
Is there a guarantee?
Yes, for a year. If there’s a problem with the work in that time, we come back and put it right.
Is a cracked acrylic bath repairable?
Often, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a picture.
What does bath repair cost?
Prices start from £95. We give a fixed price based on photos of the damage. Send a close-up and a picture of the entire item with your DN15 postcode.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit typically costs less than separate visits. Send pictures of everything you’d like done.
Do you charge for travel?
Travel is included in the price, and we charge the same wherever you are.
Repairs by material
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
When to call us in Whitton
Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
Send us a picture if you notice any of these:
- A chip where the taps sit
- Rust by the waste and overflow
- A failed DIY repair that’s discoloured or lifting
- Chips on the rim or sides
What to look for in a quote
- How long the guarantee is and what it covers
- How your room will be protected
- Aftercare advice
- How the colour is matched
Towns and villages near Whitton
Other services in Whitton
About our accreditations · Every repair comes with a one-year guarantee.
