South Gloucestershire · England
Bath chip & crack repair in Broomhill, South Gloucestershire
Local bath repair for Broomhill: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- A kit repair that didn’t last
Bath repair in Broomhill without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the following day. You will not need a plumber or tiler, because the bath doesn’t move. If you are dealing with rusty patches near the plughole and a kit repair that didn’t last, we can usually put it right.
Whatever the size of the job, it’s backed by a one-year guarantee.
- Area
- Broomhill (BS16)
- Region
- South Gloucestershire
- Cover
- One year on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Prices and what affects them
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Any earlier repairs that need removing first
- The material and finish
- How many items we do on one visit
- How much damage there is
Our prices are the same across the UK, so there is no premium for Broomhill. The job itself decides the price: the material, the amount of damage and how many items.
Quotes from your pictures
Two or three clear pictures are usually enough. Try to include:
- Any earlier repairs or coatings
- A close-up of the damage, in focus
- What it’s made of, if you know
- A wider photo showing the entire bath
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
More services for Broomhill
Aftercare tips
So the finish stays in good condition for years:
- Stick to mild cleaners and a soft cloth
- A dripping tap stains enamel, so fix it early
- Check that an acrylic bath does not move when you stand in it
- Rinse it down after each bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
When we would advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Cracks in parts of an acrylic bath we cannot get to from below
- Leaking fittings, which need a plumber
If in doubt, send photos and we will say what we think.
What we work on
- Pressed steel enamel
- Roll-top & freestanding
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
How the visit works
We turn up at the time we agreed with you, introduces themselves and checks the damage against your pictures first. Dust sheets and masking tape go down before we open a single tin. The work itself takes a morning or an afternoon, and the room is left clean and tidy.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the day after.
How to prepare
- Ensure the room can be ventilated
- Clear toiletries, mats and anything else from around the area
- Point us to the nearest place to park
Getting a price
Email us a picture of the damage and one of the entire item, and tell us you are in Broomhill, and we’ll come back with a fixed quote.
Read more
Landlord and trade work in Broomhill
For anyone letting property in or around Broomhill, we’ll quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
Should I try a DIY kit first?
If you’re set on a kit, follow its instructions closely, make sure the area is clean and completely dry, and give it the full curing time. If it fails, we can still put it right.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. Just mention it when you send pictures, as it can add time.
Different materials, different repairs
Acrylic
Acrylic feels warm and is light, but it relies on good support. Repairs to cracks are reinforced from the back.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Where we work around Broomhill
Broomhill is about 1 mile north-west of Fishponds, in South Gloucestershire. Clients in Broomhill get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. Our technicians cover all 110 towns and villages in South Gloucestershire, from the larger towns to small villages. Our nearest city page is Birmingham, about 73 miles away.
Our repair technicians cover all of BS16 and the streets around it. Jobs here include addresses on Brambling Walk, Whinchat Gardens and Sheldrake Drive and the roads around them. If you are just outside Broomhill, we cover Fishponds (1 mile south-east), Stapleton (1 mile south-west), Mayfield Park (1 mile south-east), Lockleaze (1 mile west) and Frenchay (1 mile north-east). We also work in nearby towns such as Kingswood (3 miles south-east), Yate (7 miles north-east), Bradley Stoke (3 miles north), Thornbury (9 miles north), Patchway (3 miles north-west) and Morton (9 miles north).
Near you in Broomhill
Our clients here include homes close to Bristol Metropolitan Academy, Begbrook Primary Academy and South Gloucestershire Hospital Home Teaching Service. Other local landmarks include Snuff Mills (under half a mile south), St Matthias (0.5 miles south-east) and The Old Tavern Public House (under half a mile south). The nearest railway station is Filton Abbey Wood station, about 1.5 miles north-west. A little further out are Cabot Circus (2.8 miles south-west) and Blackberry Hill Hospital (less than half a mile south). The countryside around Broomhill includes Purdown and Tarn Lake.
- Parks and local facilities nearby include Barton Regis Rural District (1.3 miles south-west)
Repair or replace in Broomhill?
Think about the hidden costs of a new bath: taking out the old one, plumbing, tiling, a panel and redecorating. With a repair, it’s one visit and one price. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why book with us
- CHAS, Constructionline and SafeContractor accredited
- Dust sheets down, tidy finish
- One visit for most repairs
- No extra charge for your area
See our pricing and resurfacing vs replacement cost guide.
FAQs for Broomhill
Is a cracked acrylic bath repairable?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a photo.
Are you a vetted contractor?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you quote from photos?
Yes, almost always. Clear photos let us give you a fixed quote without visiting.
Do you charge for travel?
There’s no separate call-out charge. Your fixed quote includes everything.
Do you cover the entire of South Gloucestershire?
Across the UK, and that includes Broomhill. Prices don’t change with location.
Do the materials smell?
It depends on the job, but often a little. Ventilation keeps it to a minimum, and it soon fades.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Can rust on a bath be repaired?
Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.
About our accreditations · Every repair comes with a one-year guarantee.
