Cheshire East · England
Bath Repair in Brown's Bank
Bath repair for Brown's Bank, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Damage beneath the taps
- A failed DIY repair that’s discoloured or lifting
Bath repair in Brown's Bank, done in place
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, the tiles are not touched, and the repaired area is colour-matched so it blends in. We are often asked to fix chips along the edge of the bath and damage beneath the taps, on pressed steel enamel, whirlpool & spa baths and cast iron enamel.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Location
- Brown's Bank (CW3)
- Area hub
- Cheshire East
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Our work in Brown's Bank
Brown's Bank is about 6 miles north of Market Drayton, in Cheshire East. Across the CW3 area, we carry out the work at your property. We work in all 254 towns and villages in Cheshire East. We work right across the region, from Brown's Bank to Liverpool (about 34 miles away).
Here we cover the CW3 postcode area. Neighbouring places we cover include Swanbach (1 mile south-east), Lightwood Green (1 mile west), Audlem (1 mile north-east), Coxbank (1 mile south-east) and Kinsey Heath (1 mile south-east). We also work in nearby towns such as Crewe (9 miles north), Nantwich (6 miles north), Middlewich (15 miles north), Sandbach (13 miles north-east), Coppenhall (9 miles north) and Leighton (10 miles north).
Around Brown's Bank
Around Brown's Bank, we work in homes near St James' Church, Audlem St James' CofE Primary School and Shroppie Fly pub. The nearest railway station is Wrenbury station, roughly 3.8 miles north-west.
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
Repairing versus replacing in Brown's Bank
Swapping a damaged bath for a new one normally involves a plumber, removing the old bath, re-tiling and a new panel and disposing of the old one. A repair deals only with the damage in a single visit. Prices start from £95. Set against the cost of replacement, repairing normally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- Straight answers about what a repair can do
- CHAS, Constructionline and SafeContractor accredited
- Fixed prices from your pictures
- Nothing taken out or refitted
Read our full price list or guide to resurfacing and replacement costs.
Looking after it afterwards
How the surface is treated afterwards matters. Here’s what we suggest:
- Rinse it down after each bath
- If an acrylic bath flexes, have its feet adjusted
- Fix dripping taps early to stop staining and limescale
- Keep abrasive pads and gritty cleaners away from the bath
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Each time it flexes, the crack grows, and water can get through to the floor below.
Prices and what affects them
Repairs from £95. You will not pay by the hour. The price is based on:
- How many items we do on one visit
- Access to the area
- Unusual colours or finishes
- The material and finish
Rather than charging by the hour, we price the whole job up front. Damage, material and access decide it, and combining items on one visit brings it down.
Getting a price from photos
The better the photos, the more accurate the price. Here’s what helps:
- Good light, ideally daylight, without flash glare
- Whether it’s been repaired or coated before
- Any details about the material
- One picture of the whole bath
Email us a photo of the damage and a wider shot of the whole item, and tell us you are in Brown's Bank, and we will reply with a fixed price.
Nearby places to Brown's Bank
Also in Brown's Bank
What your bath is made of matters
Acrylic
Acrylic feels warm and is light, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Brown's Bank questions
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
How long does the repair take to cure?
Generally the next day. We will tell you the exact curing time when we finish.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Do you work in Brown's Bank?
We do. Technicians travel to Brown's Bank from across the region, with no extra charge for travel.
How soon can you come?
That depends on our diary for your area. We’ll offer you dates when we send your quote.
Honest limits
We’ll always be straight with you, so here’s what a repair won’t do:
- Water coming from the waste or taps rather than the bath
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
Not sure? Send photos and we will give you a straight answer.
What we work on
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Signs you need bath repair in Brown's Bank
Acrylic baths that crack nearly always have a support problem. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move until it cracks.
Contact us if you’ve noticed any of these:
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
- Chips under the taps
- Holes from dropped items
Questions to ask before booking
- Who will actually do the work
- The length of the guarantee and what it covers
- Is the price fixed, and does it include VAT?
- How long it needs to cure
What happens on the day
We work cleanly and quietly, so you can stay at home while we are there. We protect the area first, then the work takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- We mix the colour on the day to match your bath’s exact shade.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the following day.
How to prepare
- Mention any parking restrictions or tricky access
- Avoid using the area for a few hours before we arrive
- Tell us if there are stairs or a lift
Get a quote
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
