Cumbria · England
Bath Repair in Brunstock
We travel to Brunstock for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- Chips along the edge of the bath
Looking after it afterwards
Once the work has cured, treat it gently:
- Keep abrasive pads and gritty cleaners away from the bath
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
Leave the repair to cure for as long as we say before using the bath. After that, gentle cleaning keeps it looking good.
Stop using the bath if a crack lets water through. Leaks under a bath can damage floors and ceilings.
Bath repair in Brunstock, done in place
We see every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. All of it is repaired where the bath stands. We regularly repair roll-top & freestanding, pressed steel enamel and acrylic, and the jobs we see most are damage done while the bathroom was being fitted and hairline or through cracks in acrylic.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Brunstock (CA6)
- Area hub
- Cumbria
- Guarantee
- 12 months on all our work
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Signs you need bath repair in Brunstock
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water collects there, so chips nearby rust quickly.
Common reasons people in Brunstock contact us include:
- A failed DIY repair that’s discoloured or lifting
- Chips under the taps
- Rusty patches near the plughole
- Scuffs and scratches in the surface
Before you book anyone
- The length of the guarantee and what it covers
- Who will actually do the work
- Whether the price covers travel
- How the colour is matched
Other services in Brunstock
How we price bath repair
Repairs from £95. You’ll know the full cost before you book. We take into account:
- Where the damage is and how we get to it
- How many areas need work
- Any earlier repairs that need removing first
- Unusual colours or finishes
No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Quotes from your pictures
Almost every job we do is priced from pictures. This is what we need:
- Any earlier repairs or coatings
- One picture of the whole bath
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Repairing versus replacing in Brunstock
People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why Brunstock clients choose us
- Free fixed quotes from pictures
- Work done at your home or business
- Everything repaired in place
- Every repair guaranteed for a year
Read our full price list and bath cost comparison.
Honest limits
Some jobs are not right for a repair, for example:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we cannot get to from below
If in doubt, send pictures and we will say what we think.
Surfaces we repair
- Roll-top & freestanding
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
Your questions about bath repair in Brunstock
Is the work guaranteed?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Can a cracked acrylic bath be fixed?
Often, yes, as long as we can get to the back of the crack to support it. Check under the bath panel, or send us a photo.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
Will there be a smell?
A little, depending on the job. Open windows and an extractor fan help.
Is it messy?
No. The work area is masked and covered, and we leave the room clean.
I’m a tenant. Can you help?
Yes. Ask your landlord first, and we can send them the quote if that helps.
What happens next?
We come back with a fixed price, usually with dates to choose from. You’re under no obligation.
DIY repairs versus a professional job
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
For a hairline mark somewhere you’ll never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.
For landlords and businesses
We are used to working with agents and managing companies. Just send photos, the address and how to get access and we will arrange it.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which is easier on the people living there.
The process
The work is clean and fairly quiet, so you can stay at home while we are there. Protection goes down first, then the work takes a few hours, depending on the damage. At the end we talk you through how soon it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, typically the day after.
Preparing for the visit
- Let us know about parking or access
- Open a window if you can
- Avoid using the area for a few hours before we arrive
How to get a price
For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Related advice
Our work in Brunstock
Brunstock is about 3 miles north-east of Carlisle, in Cumbria. Across the CA6 area, a technician comes to you. Our technicians cover all 438 towns and villages in Cumbria. Our nearest city page is Newcastle upon Tyne, about 51 miles away.
Postcode districts we cover here: CA6. Jobs here include addresses on Brunstock Mews and Brunstock Lane and the roads around them. Other places close to Brunstock include Houghton (1 mile west), Whiteclosegate (1 mile south), Tarraby (1 mile south-west), Rickerby (2 miles south) and Etterby (2 miles south-west). Larger places within reach include Carlisle (3 miles south-west), Currock (3 miles south), Raffles (3 miles south-west), Botcherby (3 miles south), Morton (4 miles south-west) and Wigton (12 miles south-west).
What’s near Brunstock
In Brunstock, that means homes near St John Henry Newman Catholic School, Houghton CofE School and Church of St John. The closest station to Brunstock is Carlisle station, roughly 2.7 miles south. A little further out are Carlisle City General Hospital (2.5 miles south) and A World In Miniature Museum (less than half a mile north-west).
- Parks and local facilities nearby include County Borough of Carlisle (2.4 miles south-west)
About our accreditations · Every repair comes with a one-year guarantee.
