Wigan · England

Bath chip & crack repair in Bryn Gates, Wigan

Bath repair for Bryn Gates, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Repairs from £95
  • Impact holes in acrylic
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair for Bryn Gates homes

Keeping it looking good

Most damage we see is avoidable. A few tips:

  • Avoid scourers, wire wool and gritty cream cleaners
  • Fix dripping taps early to stop staining and limescale
  • Protect the bath with a towel when doing jobs nearby
  • Clean with warm water and a mild detergent

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.

A small chip is a quick job. Left alone, they stain and can rust, so it’s worth getting them done early.

How we handle bath repair in Bryn Gates

Most of our bath repairs take a few hours, and you can usually bathe again the next day. You will not need a plumber or tiler, because the bath doesn’t move. We regularly repair whirlpool & spa baths, cast iron enamel and pressed steel enamel, and the jobs we see most are a chip where the taps sit and rust by the waste and overflow.

Your repair is guaranteed for a year, as with every job we do.

Broken acrylic bath corner, rebuilt and refinished (before and after)
Location
Bryn Gates (WN2)
County
Wigan
Guarantee
12 months on all our work
Quote
From £95. Free, fixed quote from pictures
Call
0345 017 0787
Page updated
23 October 2026

Prices and what affects them

Repairs from £95. We price every job individually, from your pictures. What matters most is:

  • How much damage there is
  • Whether we combine several jobs
  • Any earlier repairs that need removing first
  • How hard the colour is to match

The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.

Send pictures for a quote

Phone photos are fine. Just ensure we can see:

  • A coin beside the damage so we can judge size
  • A close-up of the damage, in focus
  • Whether it’s been repaired or coated before
  • Natural light rather than flash

For a price in Bryn Gates, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

What we do, step by step

The work is clean and fairly quiet, so you can stay at home while we are there. We protect the area first, then the work takes a few hours. Before we leave, we explain the curing time and the aftercare.

  1. First, we check the damage against your pictures and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Getting ready for the visit

  • Keep a parking space free if you can
  • Clear toiletries, mats and anything else from around the area
  • Let us know if it has been repaired before

Ask for a price

You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Get a free quote

Advice

What your bath is made of matters

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so repair chips early.

What we cannot put right

Honesty matters more than a booking, so here’s what a repair cannot fix:

  • Acrylic cracks with no access behind them
  • Flexing caused by a failed cradle or loose feet
  • Wear across the entire surface, which needs re-enamelling

Send us photos and we’ll tell you honestly.

Materials we work on in Bryn Gates

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Acrylic

Landlords, agents and businesses in Bryn Gates

Rental properties take more wear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

We’re used to working with agents and managing companies. Send the address, pictures and access details.

FAQs for Bryn Gates

How do I book?

A close-up, a wider photo and your postcode. After that, we just agree a date.

It’s been repaired before. Can you still fix it?

Generally, yes. Let us know what was used before and we’ll plan for it.

Can you repair a crack in an acrylic bath?

In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.

Can I get a quote without a visit?

Nearly always. If pictures do not show enough, we’ll ask for another angle.

What happens once I’ve sent pictures?

You’ll get a fixed quote back. You’re under no obligation.

Can you repair a chip on a coloured bath?

Yes, we match coloured baths too. The colour is tinted by hand on the day.

When can you do it?

We’ll give you dates with your quote. If it’s urgent, say so and we will do what we can.

I rent my home. Can I book you?

We can work for tenants, landlords or agents. Just make sure the landlord agrees.

Bryn Gates and nearby

Bryn Gates is about 2 miles north-east of Ashton-in-Makerfield, in Wigan. We agree a date that works for you, and we’ll give you an arrival time in advance, so there’s no waiting around. Bryn Gates is one of 63 towns and villages in Wigan where we work. You can also see our page for Liverpool, about 15 miles away.

We cover every part of the WN2 postcode area. Jobs here include addresses on Fourth Street, Kintbury Street and Third Street. If you’re just outside Bryn Gates, we cover Bamfurlong (1 mile north-east), Platt Bridge (1 mile north-east), Land Gate (1 mile west), Goose Green (2 miles north-west) and Poolstock (2 miles north-west). Within a short drive, we also cover Wigan (3 miles north-west), Leigh (4 miles east), Hindley (3 miles north-east), Atherton (5 miles east), Standish (6 miles north) and Scholes (3 miles north).

Near you in Bryn Gates

Typical jobs here are in homes near Abram Bryn Gates Primary School, Church Of The Good Shepherd and Bryn Hall pub and the streets around them. Other local landmarks include Newbridge Learning Community (1.3 miles north) and Three Sisters Recreation Area (0.6 miles west). The nearest railway station is Bryn station, about 1.5 miles west of the centre. Nearby you will also find Marketgate Shopping Centre (2.9 miles north) and Atherleigh Park Hospital (3.6 miles east). Open spaces near Bryn Gates include Highfield Moss and Billinge Hill.

  • Local facilities include Bryn (1.8 miles south-west)
Map of Bryn Gates © OpenStreetMap contributors

Do you need bath repair in Bryn Gates?

Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On enamelled baths, a chip that reaches the metal will start to rust.

The most common problems we’re called about are:

  • Damage beneath the taps
  • Hairline or through cracks in acrylic
  • A failed DIY repair that’s discoloured or lifting
  • Rusty patches near the plughole

Comparing quotes

  • Who will actually do the work
  • A fixed quote, and whether VAT is included
  • What prep work is covered
  • Whether the colour is mixed to match

Choosing a repair company

Repair or replace: which is better?

Cast iron baths in particular are worth repairing: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Our bath repair starts from £95. What it costs depends on the type and amount of damage, the material and how many jobs we combine into one visit. We give a fixed quote from your photos, so you know the cost before booking.

Why book with us

  • Nothing taken out or refitted
  • Free fixed quotes from pictures
  • CHAS, Constructionline and SafeContractor accredited
  • We come to you, anywhere in the UK

Take a look at our pricing or guide to resurfacing and replacement costs.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.