Wigan · England
Bath chip & crack repair in Atherton, Wigan
Bath repair in Atherton without the cost of replacing. Get a fixed quote from your photos, then we come to you.
- Repairs from £95
- Chips along the edge of the bath
- Damage done while the bathroom was being fitted
About Atherton
Atherton is about 5 miles south-west of Bolton, in Wigan. We visit customers in Atherton and nearby villages, so you don’t need to take anything anywhere. We work in all 63 towns and villages in Wigan, from the larger towns to small villages. Our nearest city page is Manchester, about 12 miles away.
Here we cover the M46, M29 and BL5 postcode area. You will find streets such as High Street, Market Street and Water Street. Atherton sits on or near the A6 and A577, so getting to you is simple. Other places close to Atherton include Hindsford (1 mile south-east), Over Hulton (2 miles north-east), Higher Folds (2 miles south), Chequerbent (2 miles north) and Tyldesley (2 miles south-east). Further out, we also cover Wigan (7 miles west), Ashton-in-Makerfield (7 miles west), Hindley (3 miles west), Ince-in-Makerfield (5 miles west), Standish (8 miles north-west) and Scholes (5 miles west). Being one of Wigan’s larger places, Atherton is somewhere we visit frequently.
Local landmarks in Atherton
Typical jobs here are in homes near St John the Baptist's Church, Meadowbank Primary School & Children's Centre and Atherton Community School and the streets around them. For rail, the closest station is Hag Fold station, about 0.5 miles north of the centre. Nearby you will also find Leigh Union workhouse (1.7 miles south-west) and Atherleigh (1.1 miles south-west). For a walk, there is Pennington Flash and Cadishead and Little Woolden Moss.
About our bath repair in Atherton
Whatever the damage, the aim is the same: a repair that is smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Our repair technicians work on pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are snagging damage from a refit and a chip where the taps sit.
Whatever the size of the job, it’s backed by a one-year guarantee in Atherton and across Wigan.
- Where
- Atherton (M46, M29, BL5)
- County
- Wigan
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Atherton
Also in Atherton
Landlords, agents and businesses in Atherton
Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.
Hotels, guest houses and holiday lets need rooms back in use quickly, so most of our work is done in a single visit. We’ll fit around changeovers where we can.
What happens on the day
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job normally takes two to three hours for most chips. We tidy up before we leave and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Keep children and pets away from the room on the day
- Tell us about any previous repairs or coatings
- Let us know which floor the room is on
Get a quote
A quote takes minutes to ask for: photograph the damage, then the entire bath, add your postcode and send them over. You’ll get a fixed price, not an estimate.
Advice
Why repair rather than replace?
If the rest of the bath is in good condition, a repair is almost always the better choice. It costs less, takes less time and causes far less upheaval, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Prices start from £95. Compared with replacing, repairing usually costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
What you get with us
- One visit for most repairs
- Colour mixed on the day to match
- CHAS and Constructionline accredited
- Dust sheets down, tidy finish
Read our pricing and guide to resurfacing and replacement costs.
When a repair isn’t the answer
Honesty matters more than a booking, so here’s what a repair cannot fix:
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we can’t get to from below
- A steel bath rusted through
Not sure? Send pictures and we’ll give you a straight answer before booking.
What we work on
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
Atherton questions
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
How long does the repair take to cure?
Typically within a day, depending on the repair.
Do you work in Atherton?
Yes, we do. We send a technician to Atherton for every job, with no extra charge for travel.
Can you repair something that’s been repaired before?
Most of the time. Let us know what was used before.
Does someone need to be in?
Yes. The technician needs access to the room for the visit, at a time that suits you.
What about rust by the waste?
Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.
Is it worth repairing rather than replacing?
Typically, when the rest is in good condition. A repair avoids removal and making good. If replacing would be better, we will say so.
Can landlords book you?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They do not rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is the part we put right.
Common problems we fix in Atherton
Baths take more knocks than people expect: bottles, shower heads and razors are dropped every day, and fittings press hard against the enamel. Over time, chips and rust spots are almost inevitable.
The things clients normally mention when they call include:
- Scuffs and scratches in the surface
- A cracked acrylic bath
- Damage beneath the taps
- Rust spots around the plughole
Before booking anyone
- How your room will be protected
- How long it needs to cure
- Whether the price covers travel
- How to care for the finish
Can I fix it myself?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
Keeping it looking good
So the finish stays in good condition for years:
- If an acrylic bath flexes, have its feet adjusted
- Avoid scourers, wire wool and gritty cream cleaners
- Rinse it down after each bath
- Fix dripping taps early to stop staining and limescale
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine, avoiding abrasives.
Rust under enamel spreads surprisingly quickly. A chip the size of a fingernail can become a much larger patch if it’s left for months, so early repair keeps the cost down.
About our accreditations · Every repair comes with a one-year guarantee.
