Gwynedd · Wales
Bath Repair for Bryncir homes
Bath repair in Bryncir without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips under the taps
About our bath repair in Bryncir
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the following day. If you’re dealing with deep scratches in acrylic and chips on the rim or sides, we can help.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Bryncir (LL51)
- County
- Gwynedd
- Warranty
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
What affects the price in Bryncir
Repairs from £95. You won’t pay by the hour. The price is based on:
- Where the damage is and how we get to it
- How many items we do on one visit
- The size and number of damaged areas
- Whether old repairs or coatings need taking off
What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so you know the cost before booking.
Getting a price from pictures
The better the pictures, the more accurate the price. Here’s what we find most useful:
- Something in shot to show the size
- Good light, ideally daylight, without flash glare
- Any earlier repairs or coatings
- A close-up of the damage, in focus
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them to us. You will get a fixed price, not an estimate.
Places near Bryncir
What else we do in Bryncir
Bryncir and nearby
Bryncir is about 18 miles south of Bangor, in Gwynedd. Anywhere in LL51, we carry out the work at your property. Bryncir is one of 165 places in Gwynedd where we work. We work right across the region, from Bryncir to Liverpool (63 miles away).
We cover every part of LL51 and the streets around it. Other places close to Bryncir include Rhoslan (2 miles south), Nasareth (4 miles north), Nebo (4 miles north), Llanystumdwy (4 miles south) and Pentrefelin (4 miles south-east). Larger places within reach include Caernarfon (11 miles north), Pwllheli (9 miles south-west), Llanbeblig (11 miles north), Porthmadog (7 miles south-east), Blaenau Ffestiniog (14 miles east) and Morfa Nefyn (12 miles west).
Around Bryncir
Locally, our jobs take us to homes close to Ysgol Gynradd Garndolbenmaen and Tafarn Yr Afr/The Goat Inn and the streets around them. For rail, the closest station is Criccieth station, about 4.3 miles south of the centre. Further afield, we also cover the area around Criccieth Castle (4.4 miles south) and Ysbyty Alltwen (5.5 miles south-east). Green spaces nearby include Mynydd Cennin and Llyn Cwm Dulyn.
What we cannot put right
A repair is not right for every job, including:
- Acrylic cracks with no access behind them
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
Not sure? Send photos and we’ll give you a straight answer before booking.
Surfaces we repair
- Cast iron enamel
- Pressed steel enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Should you replace it?
A new bath costs more than the bath itself: removal and disposal, plumbing, a new panel, tiling and decorating. With a repair, it’s one visit and one price. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the whole job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
Why choose Surface Doctor in Bryncir
- Every repair guaranteed for a year
- Colours mixed by hand to suit your surface
- Most jobs done in one visit
- We come to you, anywhere in the UK
Read our full price list and resurfacing vs replacement cost guide.
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.
Aftercare tips
It’s all simple stuff, just a few sensible habits:
- Clean with warm water and a mild detergent
- Protect the bath with a towel when doing jobs nearby
- Have new chips seen to early
- Avoid scourers, wire wool and gritty cream cleaners
For the first few days, keep heavy bottles off the repaired spot. After that, normal gentle cleaning is fine without abrasive products.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
FAQs for Bryncir
Is it safe with children and pets around?
Yes, as long as they stay out of the room we are working in. We’ll tell you when the room can be used again.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Can you price it without visiting?
Usually, yes. A close-up and a wider photo are enough to give a fixed quote.
Is it messy?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you repair something that is been repaired before?
Most of the time. Tell us what was done before.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Do I need to be at home?
Yes. We need access to the room while we work, at a time we agree with you.
What areas do you cover?
All of Gwynedd, and the rest of the UK. Travel is included in the price.
How it works
The work is clean and fairly quiet. We protect the area first, then the work takes a few hours. Before we leave, we explain how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Move bottles, mats and clutter away from the area
- Keep pets and children out of the room while we work
Get a quote
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the whole bath, we can price the job without visiting.
Related advice
What we are called out for in Bryncir
Most bath damage comes from something dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, any chip down to the metal will start to rust.
Signs it’s time to call us include:
- Chips along the edge of the bath
- Chips under the taps
- Damage done while the bathroom was being fitted
- Rust spots around the plughole
Questions to ask before booking
- Whether the price covers travel
- Who will actually do the work
- Aftercare advice
- What prep work is covered
About our accreditations · Every repair comes with a one-year guarantee.
