Neath Port Talbot · Wales
Bath Repair in Bryncoch
We travel to Bryncoch for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Scuffs and scratches in the surface
- Damage beneath the taps
Landlord and trade work in Bryncoch
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For developers and builders, we fix damage before handover, so there’s no need to replace a damaged item at the last minute. Several plots can be done in one visit.
Bath repair at your home in Bryncoch
Most bath damage, from chips and cracks to rust spots and holes, is repaired in place. Nothing is unplumbed, your tiles stay as they are, and the finish is matched to the rest of the bath. We work on whirlpool & spa baths, pressed steel enamel and cast iron enamel, and people most frequently call us about an old repair that has yellowed or come loose and damage done while the bathroom was being fitted.
We guarantee the work for a year. If something is not right in that time, we come back and put it right.
- Area
- Bryncoch (SA10)
- Region
- Neath Port Talbot
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is often needed, and the plumbing has to be disconnected and refitted. A repair skips all of it. Prices start from £95. Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we will give you the exact figure.
Why book with us
- We leave the room as we found it
- Most jobs done in one visit
- We’ll tell you if it’s not worth repairing
- Same prices wherever you are
Take a look at our prices page or bath cost comparison.
Also near Bryncoch
Other services in Bryncoch
DIY kit or professional repair?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
What we do, step by step
We begin by going over the job with you, so there are no surprises. Next, we cover and mask everything nearby and we start. It normally takes a few hours, depending on the damage.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, generally by the day after, the bath is ready to use.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Clear the area around the damage
- Keep a parking space free if you can
Get a quote
To get a price, send a couple of photos through our quote form or call us. We’ll say straight away if a repair is the right fix.
Related advice
What we cannot put right
We’ll always be straight with you, so here’s what a repair cannot fix:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Water coming from the waste or taps rather than the bath
If in doubt, send photos and we will say what we think before booking.
Surfaces we repair
- Roll-top & freestanding
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
Keeping it looking good
Much of the damage we repair could have been avoided. A few tips:
- Cover the bath during DIY or decorating
- Do not leave razors or cans standing in the bath
- Get a dripping tap fixed promptly
- Check that an acrylic bath doesn’t move when you stand in it
A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
FAQs for Bryncoch
Do you work for landlords and businesses?
We do, regularly. We quote for multiple addresses and fit around tenancy changeovers.
How do I get a price for bath repair in Bryncoch?
Repairs from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up of the damage and a wider photo and your postcode.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
What happens next?
We check the damage, the material and your postcode, then reply with a quote and the next dates we have.
Do you cover Bryncoch?
We do. Repair technicians travel to Bryncoch from across the region, with no extra charge for travel.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.
What happens if you find more damage?
The price is fixed for what the pictures show. Anything extra is discussed before we begin.
Something went through my bath. Can it be fixed?
In most cases. Photos of the hole and the underside help us check.
What affects the price in Bryncoch
Repairs from £95. We do not charge extra for travel to Bryncoch. The price comes down to:
- How easy the damage is to reach
- Doing more than one item at once
- How much damage there is
- The colour and finish to match
The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before booking.
How to get a fixed quote
You can normally get a fixed price without us visiting. To help us price it:
- Where you are, by postcode
- One picture of the whole bath
- Daylight if possible, and no flash reflection
- Something in shot to show the size
No survey visit is needed: we price from pictures. Use the quote form, or ring 0345 017 0787 to talk it through, and we will come back with a fixed figure.
Covering Bryncoch
Bryncoch is about 1 mile north of Neath, in Neath Port Talbot. From the centre of Bryncoch to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. Bryncoch is one of 100 places in Neath Port Talbot we cover.
All of SA10 is covered. From Neath Road, Elias Road and Dyffryn Road or a nearby road, a technician can come to you. If you are just outside Bryncoch, we cover Dyffryn Clydach (1 mile west), Rhyding (1 mile south-east), Cadoxton-juxta-Neath (1 mile south-east), Waun-ceirch (1 mile south) and Cwrt Herbert (1 mile south). Larger places within reach include Port Talbot (6 miles south), Sandfields (6 miles south), Baglan Moors (5 miles south), Sandfields West (6 miles south), Sandfields East (7 miles south) and Pontardawe (3 miles north-west).
Near you in Bryncoch
Around Bryncoch, we work in homes near The Lamb & Flag Inn, Church of Saint Matthew and Dwr-y-Felin Comprehensive School and the streets around them. The closest station to Bryncoch is Neath station, about 1.4 miles south of the centre. A little further out are Tonna Hospital (2.3 miles east) and Mound (1.3 miles west). The countryside around Bryncoch includes Gnoll Estate Country Park lake 1 and Cwm Clydach RSPB Reserve.
What your bath is made of matters
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that is what we repair.
About our accreditations · Every repair comes with a one-year guarantee.
