Neath Port Talbot · Wales
Bath Repair for Port Talbot homes
Fixed-price bath repair in Port Talbot and the surrounding area, done in a single visit in most cases and guaranteed for a year.
- Repairs from £95
- Chips caused by builders
- Impact holes in acrylic
About our bath repair in Port Talbot
Most of our bath repairs take a few hours, and the bath is back in use the day after. You will not need a plumber or tiler, because the bath does not move. We work on acrylic, cast iron enamel and whirlpool & spa baths, and people most often call us about a hole punched through by something heavy and a cracked acrylic bath.
You are covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Where
- Port Talbot (SA12, SA13)
- Area hub
- Neath Port Talbot
- Cover
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Prices start from £95. We charge the same across the UK, including Port Talbot. The price reflects:
- Whether we combine several jobs
- What the surface is made of
- How much damage there is
- Unusual colours or finishes
We do not add extras on the day. The price we quote from your pictures is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
How to get a fixed quote
A couple of clear pictures is all it takes. Try to include:
- Daylight if possible, and no flash reflection
- Any earlier repairs or coatings
- What it’s made of, if you know
- Your postcode, so we can check dates
No survey visit is needed: we price from photos. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through, and we’ll come back with a fixed figure.
Port Talbot: your questions answered
Is a holed acrylic bath repairable?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
I rent my home. Can I book you?
Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.
What areas do you cover?
All of Neath Port Talbot, and the rest of the UK. Travel is included in the price.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
How much does bath repair cost in Port Talbot?
Repairs from £95. Every job gets a fixed price based on pictures of the damage. Send a close-up and a picture of the entire item with your SA12 postcode.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Repairs by material
Acrylic
An acrylic bath is a moulded sheet strengthened from below. They don’t rust, but they can crack, scratch or be holed, and cracks need support from behind to stay fixed.
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, especially around the waste, so early repairs matter.
About Port Talbot
Port Talbot is about 7 miles east of Swansea, in Neath Port Talbot. Our technicians come to homes and businesses in Port Talbot and the surrounding area, so nothing has to leave your home. Port Talbot is one of 100 places in Neath Port Talbot we cover.
All of SA12 and SA13 is within our area, from the main roads to the quietest streets. That includes homes on High Street, Station Road and Wellington Place and the roads around them. With the A48 and A4107 close by, Port Talbot is simple for us to get to. Nearby, we also work in Felindre (1 mile north-east), Pen-y-cae (1 mile east), Taibach (1 mile south-east), Goytre (2 miles east) and Tai-Bach (2 miles east). Within a short drive, we also cover Neath (5 miles north), Mount Pleasant (4 miles north), Pontardawe (9 miles north), Glyn-neath (13 miles north-east), Pentreffynnon (5 miles north-west) and Pencaerau (4 miles north). Port Talbot is among the bigger towns we cover in Neath Port Talbot.
What’s near Port Talbot
Our clients here include homes close to St Joseph's RC School and 6th Form Centre, Church of St Joseph and St Joseph's Catholic Infant School and the streets around them. For rail, the closest station is Port Talbot Parkway station, about 0.5 miles east. A little further out are Aberafan Castle (less than half a mile north-east) and Aberafan Centre (less than half a mile north-east). For a walk, there’s Gnoll Estate Country Park lake 1 and Mynydd Dinas.
How the visit works
You don’t need to empty the room. Everything we use comes in the van with us, lay protective sheets and get going once we have agreed what we’re doing. Most jobs take two to three hours for most chips, and you can get on with other things while we’re there.
- We clean the area and remove any loose enamel or rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- Once it has cured, typically by the following day, the bath is ready to use.
Getting ready for the visit
- Avoid using the area for a few hours before we arrive
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
How to get a price
Pricing is simple: take a close-up of the damage and a photo from further back, send them to us with your postcode, and we will reply with a fixed quote. There is no charge for the quote and no obligation.
Related advice
DIY kit or professional repair?
DIY kits are sold for most surfaces, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
Should you replace it?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. If the whole surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why Port Talbot clients choose us
- We leave the room as we found it
- Nothing taken out or refitted
- One-year guarantee on every repair
- Straight answers about what a repair can do
Read our pricing and resurfacing vs replacement cost guide.
Honest limits
We’ll always be straight with you, so here’s what a repair will not do:
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
- Wear across the entire surface, which needs re-enamelling
Not sure? Send pictures and we will give you a straight answer before you book.
What we work on
- Roll-top & freestanding
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Looking after it afterwards
Aftercare is simple:
- Clean with warm water and a mild detergent
- Have new chips seen to early
- Fix dripping taps early to stop staining and limescale
- Rinse the bath after use, especially in hard water areas
In the first few days, avoid putting weight or bottles on the repair. After that, normal gentle cleaning is fine, avoiding abrasives.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Take it off before we arrive.
Common problems we fix in Port Talbot
Glass and heavy bottles cause more chips than anything else. Taps and wastes cause problems too: water sits around them, and any chip there soon rusts.
Most people contact us after spotting something like this:
- Chips caused by builders
- A chip where the taps sit
- A chipped rim or side
- Scuffs and scratches in the surface
What your quote should include
- How the colour is matched
- What preparation is included
- How the room is protected while they work
- How to care for the finish
More services for Port Talbot
About our accreditations · Every repair comes with a one-year guarantee.
