Surrey · England

Bath Repair for Bunce Common homes

Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Bunce Common, with a one-year guarantee on every repair.

  • Repairs from £95
  • Chips caused by builders
  • A hole punched through by something heavy
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Bunce Common

Repairing versus replacing in Bunce Common

Many people think a damaged bath means a new one. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. What it costs depends on the type and amount of damage, what it’s made of and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.

What you get with us

  • Every repair guaranteed for a year
  • We come to you, anywhere in the UK
  • CHAS and Constructionline accredited
  • No extra charge for your area

See our pricing and bath cost comparison.

About our bath repair in Bunce Common

It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, and on acrylic, a crack keeps spreading while the bath flexes. A repair stops both. Common call-outs are for deep scratches in acrylic and chips on the rim or sides, on acrylic, roll-top & freestanding and cast iron enamel.

All our work is covered by a one-year guarantee, wherever you are in Surrey.

Area
Bunce Common (RH2, RH3)
Area hub
Surrey
Warranty
A year, on every repair
Quotes
From £95. Fixed and free, based on pictures
Phone
0345 017 0787
Updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

A DIY attempt is not a disaster. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send photos, as it can add time.

How we price bath repair

Repairs from £95. Prices are worked out job by job. What matters most is:

  • Unusual colours or finishes
  • Previous DIY repairs that have to come out
  • Access to the area
  • The type of damage

The price reflects the work involved, not your postcode. The full price is agreed before you book.

Quotes from your photos

Photographing the damage takes a minute, and it saves a visit. Try to send:

  • The material, if you know it
  • A close-up of the damage, in focus
  • Good light, ideally daylight, without flash glare
  • One picture of the entire bath

A quote takes minutes to ask for: photograph the damage, then the whole bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.

Common problems we fix in Bunce Common

Rust tends to begin where water collects, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.

Typical reasons for a call-out include:

  • A chip where the taps sit
  • Chips caused by builders
  • A failed DIY repair that is discoloured or lifting
  • Chips along the edge of the bath

What your quote should include

  • How changes to the job are handled
  • Aftercare advice
  • How long the guarantee is and what it covers
  • Whether there are any call-out or travel charges

Choosing a repair company

Work for landlords and builders

Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.

Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We’ll fit around changeovers where we can.

What we do, step by step

We begin by going over the job with you, so you know exactly what we are doing. Next, we cover and mask everything nearby and the work begins. It normally takes a few hours, and we will tell you if anything changes.

  1. We protect the bath and the floor around it.
  2. We clean, key and degrease the damage.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Let us know about parking or access
  • Keep pets and children out of the room while we work
  • Clear the area around the damage

Getting a price

Getting a price is easy: snap the damage close up and then the entire item, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.

Get a free quote

Related advice

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Metal that has corroded all the way through
  • Leaking fittings, which need a plumber
  • A bath that moves underfoot, until its support is fixed

If in doubt, send pictures and we’ll say what we think.

Materials we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths
  • Cast iron enamel

Your questions about bath repair in Bunce Common

What happens next?

We review the pictures and send a fixed quote with dates.

I’m a tenant. Can you help?

Of course. Ask your landlord first, and we can send them the quote if that helps.

What information do you need?

Photos of the damage, a picture of the entire bath and your postcode. After that, we just agree a date.

Which areas do you work in?

Across the UK. Our prices are the same everywhere.

Is there a call-out fee?

No. Our quotes include travel, with the same prices everywhere we work.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

Can you repair something that is been repaired before?

Yes, we frequently do. It can add a little time, which we include in the quote.

Is my repair covered?

Every repair comes with our one-year guarantee. We will explain what it covers when we quote.

Repairs by material

Cast iron

A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.

Composite and resin

Stone resin and composite baths are heavy and solid. Chips and scratches can be filled and colour matched, just like other baths.

Bunce Common and the surrounding area

Bunce Common is about 3 miles south-east of Dorking, in Surrey. Wherever you are in the RH2 postcode area, we carry out the work at your property. We work in 395 places in Surrey. Our nearest city page is London, about 22 miles away.

Postcode districts we cover here: RH2 and RH3. You’ll find streets such as Gadbrook Road, Leigh Road and Shellwood Road, and we cover them all. We also travel to Dawesgreen (1 mile east), Strood Green (1 mile north), Leigh (1 mile east), Brockham (2 miles north) and Betchworth (2 miles north). Within a short drive, we also cover Guildford (13 miles west), Woking (15 miles north-west), Epsom (9 miles north), Horley (5 miles south-east), Redhill (5 miles north-east) and Ewell (10 miles north).

Landmarks near Bunce Common

Locally, our jobs take us to homes close to Inholms Clay Pit, Church of St Bartholomew and The Seven Stars Public House. Bunce Common’s nearest station is Betchworth station, roughly 2.7 miles north of the centre. Nearby you’ll also find East Surrey Hospital (4.9 miles east) and Reigate Priory Museum (3.5 miles north-east). Not far away are Reigate Heath and Box Hill.

Map of Bunce Common © OpenStreetMap contributors
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.