Surrey · England

Bath chip & crack repair in Horley, Surrey

Chip and crack repairs to enamel, acrylic and cast iron baths in Horley, carried out at your home and guaranteed for a year.

  • Repairs from £95
  • Chips under the taps
  • Rust by the waste and overflow
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Horley

Bath repair at your home in Horley

Repairing baths is what we do most. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, usually in a single visit. If you are dealing with chips on the rim or sides and a cracked acrylic bath, we can help, on acrylic, whirlpool & spa baths and pressed steel enamel alike.

The work is guaranteed for twelve months. If something isn’t right in that time, we come back and put it right.

Before and after: a chipped, rust-stained bath around the plughole
Location
Horley (RH6)
Area hub
Surrey
Guarantee
One year on every repair
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026

Prices and what affects them

Repairs from £95. A fixed quote means you know the cost before booking. We take into account:

  • Access to the area
  • How much damage there is
  • Whether old repairs or coatings need taking off
  • The colour and finish to match

A repair is priced on what needs doing, not where you live. You’ll see the full price before booking, with nothing added on the day.

How to get a fixed quote

You can take the photos on your phone, there is no need for anything special. Make sure they show:

  • One sharp close-up of the damage
  • A wider photo showing the entire bath
  • Good light, ideally daylight, without flash glare
  • Any details about the material

Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the whole bath, we can price the job.

Honest limits

In fairness, some problems need a different fix:

  • Rust that has eaten right through a steel bath
  • Water coming from the waste or taps rather than the bath
  • Cracks in parts of an acrylic bath we cannot get to from below

Send us photos and we’ll tell you honestly.

Surfaces we repair

  • Pressed steel enamel
  • Roll-top & freestanding
  • Cast iron enamel
  • Whirlpool & spa baths
  • Acrylic

Repair or replace: which is better?

People often assume a cracked or chipped bath has to come out. In most cases it doesn’t: a proper repair gives it years more use, without the cost and upheaval of replacing it. Repairs from £95, with every job priced individually. There are no surprise extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Why us?

  • One-year guarantee on every repair
  • We will tell you if it’s not worth repairing
  • Most jobs done in one visit
  • Free fixed quotes from pictures

Read our prices page or guide to resurfacing and replacement costs.

How it works

Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. It normally takes two to three hours for most chips, and you can get on with other things while we’re there.

  1. First, we check the damage against your pictures and agree the plan.
  2. Loose enamel, rust and dirt are removed so the repair can bond.
  3. We build up the filler in layers, shaping it to the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

How to prepare

  • Mention if the room is upstairs or in a flat
  • Open a window if you can
  • Clear the area around the damage

How to get a price

Most clients in Horley get their price from photos. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Send photos for a quote

Read more

Can I fix it myself?

You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

If you’re set on a kit, follow its instructions closely, ensure the area is clean and completely dry, and do not use it until it has fully cured. If it does not work out, we can still repair it properly.

Materials and what they mean for the repair

Composite and resin

Composite baths are dense and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Cast iron

Cast iron is heavy and rigid, with a fused enamel surface. Chips can rust if left, but the body of the bath lasts a very long time, so it’s always worth repairing.

Signs you need bath repair in Horley

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.

Signs it’s time to call us include:

  • Rusty patches near the plughole
  • Snagging damage from a refit
  • Hairline or through cracks in acrylic
  • An old repair that has yellowed or come loose

Comparing quotes

  • How the colour is matched
  • What preparation is included
  • How changes to the job are handled
  • Who will actually do the work

How to compare quotes

Aftercare tips

It’s all simple stuff, just a few sensible habits:

  • Keep metal cans and razors off the surface
  • Cover the bath during DIY or decorating
  • Avoid scourers, wire wool and gritty cream cleaners
  • Check that an acrylic bath doesn’t move when you stand in it

Use gentle, non-abrasive cleaners and try not to drop heavy bottles on the repair. Deal with new chips early, before rust can start.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.

Horley and nearby

Horley is about 5 miles north of Crawley, in Surrey. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. We work in all 395 towns and villages across Surrey. Our nearest city page is London, about 22 miles away.

We work across the RH6 postcode area and the streets around it. We regularly work on streets such as Station Road, High Street and Church Road. You’ll find Horley on the A23 and B2036, which makes it straightforward to reach. We also cover the places around Horley: Hookwood (1 mile south-west), Fernhill (2 miles south-east), Burstow (2 miles south-east), Smallfield (2 miles east) and Shipley Bridge (2 miles south-east). Within a short drive, we also cover Epsom (12 miles north), Redhill (4 miles north), Ewell (13 miles north), Reigate (4 miles north), Caterham (8 miles north-east) and Dorking (8 miles north-west). Horley is among the bigger towns we cover in Surrey.

Landmarks near Horley

We visit homes around Oakwood School, Horley Infant School and St Wilfrid's Church and the streets around them. The closest station to Horley is Horley station, roughly 0.8 miles south-east. Further afield, we also cover the area around Reigate Castle (4.5 miles north) and East Surrey Hospital (2.8 miles north). The countryside around Horley includes Reigate Heath.

Map of Horley © OpenStreetMap contributors

Horley questions

Do you charge for travel?

We don’t add a call-out fee. Your fixed price includes everything.

Do you work in Horley?

Yes, we do. We send a technician to Horley for every job, with no extra charge for travel.

Do you cover the whole of Surrey?

We work UK-wide, and that includes Horley. Our prices are the same everywhere.

Can you repair a chip on a coloured bath?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Do I have to be there?

Someone needs to let us in and show us the job. You do not need to watch us work.

Can I add another job to the visit?

Yes, and it’s frequently cheaper. Send pictures of everything together and we’ll quote them together.

Is it OK to have pets in the house?

Keep pets and children away from the work area on the day.

What if the damage is worse than the pictures show?

We will show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.