South Lanarkshire · Scotland
Bath chip & crack repair in Burnfoot, South Lanarkshire
Local bath repair for Burnfoot: a fixed quote from pictures, a tidy visit and a one-year guarantee.
- Repairs from £95
- A chip where the taps sit
- A failed DIY repair that is discoloured or lifting
For landlords and businesses
Rental properties take more wear, and replacing items every time a tenant leaves is expensive. Repairing between tenants keeps the property presentable for less.
We carry out planned and one-off repairs for housing associations and facilities teams. A repair avoids taking out and refitting, which matters when someone is living in the home.
About our bath repair in Burnfoot
Whether your bath is steel, cast iron or acrylic, we can repair it. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. Typical jobs include rusty patches near the plughole and a failed DIY repair that’s discoloured or lifting, on acrylic, whirlpool & spa baths and roll-top & freestanding.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Area
- Burnfoot (ML11)
- Area hub
- South Lanarkshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
About Burnfoot
Burnfoot is about 5 miles south-west of Carluke, in South Lanarkshire. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Burnfoot is one of 139 towns and villages in South Lanarkshire where we work. We work right across the region, from Burnfoot to Glasgow (19 miles away).
Our technicians cover all of the ML11 postcode area and the streets around it. Nearby, we also work in Auchenheath (1 mile north-east), Kirkmuirhill (1 mile west), Blackwood (1 mile north-west), Dillarburn (2 miles south-east) and Boghead (2 miles south-west). We also work in nearby towns such as East Kilbride (13 miles north-west), Hamilton (9 miles north-west), Cambuslang (14 miles north-west), Uddingston (13 miles north-west), Blantyre (12 miles north-west) and Larkhall (6 miles north-west).
What’s near Burnfoot
Typical jobs here are in homes near Kirkmuirhill Parish Church and Lesmahagow High School, among other places. The closest station to Burnfoot is Carluke station, roughly 4.9 miles north-east. Well-known places in the area include Birkwood Castle (2.4 miles south) and Craignethan Castle (2.2 miles north). Not far away are Black Hill.
How it works
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. Most visits take a few hours, depending on the damage.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Mention any earlier repairs or resurfacing
- Tell us about parking, stairs or access
- Open a window if you can
How to get a price
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Related advice
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it doesn’t stop a professional repair. It does add a little time, so tell us about it when you send photos.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is typically the cheaper route.
What affects the price in Burnfoot
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- Whether it’s a chip, crack, burn or wear
- How much damage there is
- The material
- Where the damage is and how we get to it
Compared with replacing, repairing generally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Quotes from your photos
Two or three clear photos are normally enough. Try to include:
- One sharp close-up of the damage
- Any earlier repairs or coatings
- Daylight if possible, and no flash reflection
- Something in shot to show the size
You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
What we are called out for in Burnfoot
Damage during fitting is very common. Tools, tiles and fittings get dropped into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Keep an eye out for these signs:
- Hairline or through cracks in acrylic
- Holes from dropped items
- An old repair that has yellowed or come loose
- Damage beneath the taps
Comparing quotes
- What happens if the damage is worse than the photos show
- When it can be used again
- Whether the colour is mixed to match
- A fixed price, and whether VAT is included
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Instead of hourly rates, we price the whole job up front. Damage, material and access decide it.
Why Burnfoot customers choose us
- We’ll tell you if it’s not worth repairing
- Colours mixed by hand to suit your surface
- One price list for the entire UK
- We come to you, anywhere in the UK
Read our pricing and resurfacing vs replacement cost guide.
Questions from Burnfoot
Can you repair a hole in a bath?
Usually. Send us a picture of the hole and one from under the bath if you can.
Is repairing better than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
How do I book?
Photos of the damage, a photo of the entire bath and your postcode. After that, we just agree a date.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Is there a call-out fee?
There’s no separate call-out charge. Your fixed quote includes everything.
How quickly can you book me in?
That depends on our diary for your area. We will offer you dates when we send your quote.
Aftercare tips
A little care keeps the finish looking good. We recommend:
- Stick to mild cleaners and a soft cloth
- Do not leave razors or cans standing in the bath
- Protect the bath with a towel when doing jobs nearby
- Get any new chip repaired before it rusts
Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so we treat and seal the metal before filling.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. They don’t rust, but they can crack, scratch or be holed, and a crack only stays repaired if it’s supported underneath.
Also near Burnfoot
Also in Burnfoot
About our accreditations · Every repair comes with a one-year guarantee.
