North Yorkshire · England
Bath chip & crack repair in Burnsall, North Yorkshire
Bath repair across Burnsall and nearby, done in a single visit in most cases.
- Repairs from £95
- A chipped rim or side
- A failed DIY repair that’s discoloured or lifting
How we handle bath repair in Burnsall
It pays to repair bath damage while it’s small. Exposed metal on enamelled baths soon rusts, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Common call-outs are for cracks in an acrylic bath and holes from dropped items, across roll-top & freestanding, pressed steel enamel and acrylic.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Burnsall (BD23)
- County
- North Yorkshire
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What bath repair costs
Repairs from £95. Prices are worked out job by job. What matters most is:
- Previous DIY repairs that have to come out
- How much damage there is
- What kind of damage it is
- Unusual colours or finishes
The price reflects the work involved, not your postcode. The full price is agreed before booking, with nothing added on the day.
How to get a fixed price
We price nearly every job from pictures. This is what we need:
- A clear, close picture of the problem area
- A picture taken from further back
- The postcode, so we can plan the visit
- Whether it’s been repaired or coated before
Email us pictures of the damage and one of the entire item, and tell us you’re in Burnsall, and we’ll reply with a fixed price.
Places near Burnsall
What else we do in Burnsall
What happens on the day
On the day itself, there is little for you to do. Show us the job, point us to the room, and we will get on with it. Most visits take two to three hours for most chips.
- First, the area is cleaned and any loose enamel or rust is removed.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- The repair is left to cure, and most baths can be used the following day.
Getting ready for the visit
- Point us to the nearest place to park
- Mention if the room is upstairs or in a flat
- Mention any earlier repairs or resurfacing
Getting a price
To get a price, send two or three photos using our quote form or call us. We’ll say straight away whether it can be repaired.
Read more
Can I fix it myself?
For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
It’s tempting to reach for a kit, but the repairs we redo most often are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
Burnsall questions
Can I add another job to the visit?
Of course, and it normally saves money. Send pictures of everything together and we’ll quote them together.
Is a holed acrylic bath repairable?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
When can I have a bath again?
Typically within a day, though it depends on what we’ve done.
How much does bath repair cost in Burnsall?
Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you cover Burnsall?
We do. We send a technician to Burnsall for every job, with no extra charge for travel.
How soon can you come?
It depends on the time of year and where you are. Send photos with your postcode and we will reply with the earliest dates.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
Aftercare tips
Nothing complicated is needed, just a few sensible habits:
- Use a soft cloth and washing-up liquid for everyday cleaning
- Give the bath a quick rinse after use
- Fix dripping taps early to stop staining and limescale
- Check that an acrylic bath does not move when you stand in it
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, turning a quick repair into a bigger one.
Where we work around Burnsall
Burnsall is about 6 miles north-east of Skipton, in North Yorkshire. We travel to clients in Burnsall, so nothing has to leave your home. Burnsall is one of 626 places in North Yorkshire where we work. Our jobs stretch from Burnsall to Leeds (about 23 miles away).
Here we cover the BD23 postcode area. We also cover the places around Burnsall: Hartlington (1 mile north-east), Hebden (1 mile north), Drebley (2 miles south-east), Skyreholme (2 miles east) and Howgill (2 miles south-east). Further out, we also cover Skipton (6 miles south-west), Settle (13 miles west), Pateley Bridge (8 miles east), Grassington (3 miles north-west), Embsay (5 miles south) and Gargrave (7 miles south-west).
Local landmarks in Burnsall
We visit homes around Church of St Wilfred and Burnsall Voluntary Aided Primary School and the streets around them. Well-known places in the area include Grassington Folk Museum (2.5 miles north-west). Open spaces near Burnsall include Thorpe Fell Top.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that is what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Should you replace it?
For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. No two jobs are quite the same, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and combining jobs on one visit brings the cost down.
Why book with us
- Most jobs done in one visit
- Everything repaired in place
- CHAS, Constructionline and SafeContractor accredited
- Free fixed quotes from pictures
Read our prices page or guide to resurfacing and replacement costs.
Landlords, agents and businesses in Burnsall
For anyone letting property in or around Burnsall, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.
We carry out planned and one-off repairs for housing associations and facilities teams in North Yorkshire and across the UK. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
When to call us in Burnsall
Rust usually starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
These are the problems we are asked about most:
- Holes from dropped items
- A chipped rim or side
- Deep scratches in acrylic
- Damage done while the bathroom was being fitted
Questions to ask before booking
- Whether cleaning and preparation are in the price
- What protection goes down before work starts
- Whether a trained technician does the job
- Aftercare advice
About our accreditations · Every repair comes with a one-year guarantee.
