Cheshire West and Chester · England
Bath Repair for Burwardsley homes
Chip and crack repairs to enamel, acrylic and cast iron baths in Burwardsley, carried out at your home and guaranteed for a year.
- Repairs from £95
- Chips along the edge of the bath
- Holes from dropped items
The process
There is not much you need to do on the day. Show us the job, point us to the room, and we’ll get on with it. The job generally runs to two to three hours for most chips.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can normally use the bath the next day.
Getting ready for the visit
- Tell us about parking, stairs or access
- Clear the area around the damage
- Keep children and pets away from the room on the day
Get a quote
We price from pictures so you don’t have to wait in for a survey. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Related advice
Bath repair in Burwardsley without replacing anything
We have repaired just about every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands with a one-year guarantee. Whether it’s damage done while the bathroom was being fitted and damage beneath the taps, we can help.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before you book.
- Where
- Burwardsley (CH3)
- Region
- Cheshire West and Chester
- Guarantee
- A year, on every repair
- Price
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Towns and villages near Burwardsley
Other services in Burwardsley
When a repair isn’t the answer
We will always be straight with you, so here’s what a repair cannot fix:
- Cracks in parts of an acrylic bath we can’t get to from below
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Metal that has corroded all the way through
If in doubt, send photos and we will say what we think.
What we work on
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
About Burwardsley
Burwardsley is about 9 miles west of Nantwich, in Cheshire West and Chester. Book a date that suits you, and you’ll know when to expect us, so you are not left waiting in all day. We cover 224 places across Cheshire West and Chester. Our jobs stretch from Burwardsley to Liverpool (about 23 miles away).
Postcode districts we cover here: CH3. That includes homes on Church Road, Harthill Road and School Lane. Close by, we cover Higher Burwardsley (1 mile east), Newtown (1 mile north-west), Newton (2 miles north), Tattenhall (2 miles north-west) and Newton-by-Tattenhall (2 miles north-west). Further out, we also cover Chester (9 miles north-west), Ellesmere Port (14 miles north-west), Winsford (10 miles north-east), Northwich (14 miles north-east), Boughton (9 miles north-west) and Frodsham (13 miles north).
What’s near Burwardsley
In Burwardsley, that means homes near St John's Church. Well-known places in the area include Bolesworth Castle (1.3 miles west) and Tarporley War Memorial Hospital (4.6 miles north-east). Not far away are Bickerton Hill.
Work for landlords and builders
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.
For anyone letting property in or around Burwardsley, we will quote for several properties at once. Send pictures for each one and we will come back with a combined price.
What bath repair costs
Repairs from £95. A fixed quote means you know the cost before you book. We look at:
- The material and finish
- The colour and finish to match
- How easy the damage is to reach
- How many areas need work
Instead of hourly rates, we price the entire job up front. It depends on the damage, the material and access, and combining items on one visit brings it down.
How to get a fixed price
You can generally get a fixed quote without us visiting. To help us price it:
- Good light, ideally daylight, without flash glare
- Any details about the material
- Details of any past repairs
- One picture of the entire bath
For a price in Burwardsley, the easiest route is pictures: a close-up, a wider shot and your postcode. You will get a fixed quote with dates to choose from.
Different materials, different repairs
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Repairing versus replacing in Burwardsley
Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and a like-for-like replacement can be expensive. A repair keeps it in place. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all make a difference, and combining jobs on one visit brings the cost down.
Why us?
- Same prices wherever you are
- One-year guarantee on every repair
- CHAS, Constructionline and SafeContractor accredited
- Honest advice, even when it means no job
Read our prices page or bath cost comparison.
What we are called out for in Burwardsley
Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On enamelled baths, a chip that reaches the metal will start to rust.
These are the problems we are asked about most:
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
- Rust spots around the plughole
Questions to ask before you book
- How long the guarantee is and what it covers
- When it can be used again
- Whether the price covers travel
- How the colour is matched
Keeping it looking good
A little care keeps the finish looking good. Our advice:
- Ensure an acrylic bath is firm underfoot
- Protect the bath with a towel when doing jobs nearby
- Get a dripping tap fixed promptly
- Give the bath a quick rinse after use
Clean with mild, non-abrasive cleaners and try not to drop heavy bottles on the repair. Get any new chip seen to quickly, before rust sets in.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and water can get through to the floor below.
Questions from Burwardsley
Can you fix rust around the plughole?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
Will I be able to see the repair?
We aim for a repair you can’t easily find. The rest of the bath’s condition makes a difference, and we’ll tell you what to expect.
What do you need from me?
Use the quote form or ring 0345 017 0787.
What areas do you cover?
We cover the whole UK, including Burwardsley and the rest of Cheshire West and Chester. Just include your postcode and we will offer you dates.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
Do you come to Burwardsley?
Yes. We cover the whole UK and come to Burwardsley and the rest of Cheshire West and Chester. Send us pictures for a fixed quote, or call 0345 017 0787.
Is there a guarantee?
Every repair comes with our one-year guarantee. We will explain what it covers when we quote.
Is there any odour?
There may be a mild smell during the work that clears as it cures.
About our accreditations · Every repair comes with a one-year guarantee.
