Wakefield · England

Bath chip & crack repair in Calder Grove, Wakefield

Our repair technicians come to Calder Grove for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, with a one-year guarantee.

  • Repairs from £95
  • A kit repair that didn’t last
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Calder Grove

Bath repair at your home in Calder Grove

Most bath damage, from chips and cracks to rust spots and holes, can be repaired with the bath left exactly where it is. Nothing is unplumbed, the tiles are not touched, and the finish is matched to the rest of the bath. We’re often asked to fix rusty patches near the plughole and a hole punched through by something heavy, in whirlpool & spa baths, roll-top & freestanding and pressed steel enamel.

All our work comes with our one-year guarantee, wherever you are in Wakefield.

Location
Calder Grove (WF4)
Area hub
Wakefield
Guarantee
One year on every repair
Quote
From £95. Free and fixed, from your photos
Phone
0345 017 0787
Last updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Common questions in Calder Grove

Are you accredited?

Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Can you repair a chip on a coloured bath?

Yes, we match coloured baths too. We tint the finish to your bath on site.

What does bath repair cost?

Prices start from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.

Can landlords book you?

Yes, frequently. We quote for multiple addresses and fit around tenancy changeovers.

How do I book?

Just photos, your postcode and a contact number. On the day, we only need access to the room.

Will it make a mess?

No. The work area is masked and covered, and we take our waste away with us.

Are there extra charges for Calder Grove?

No. Our quotes include travel, and we charge the same wherever you are.

Do the materials smell?

Expect a mild smell while we’re working that clears as it cures.

DIY kit or professional repair?

What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.

A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.

Repair or replace: which is better?

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and nothing else in the room changes. Repairs from £95, with every job priced individually. Instead of hourly rates, we price the whole job up front. It depends on the damage, the material and access.

Why us?

  • A year’s guarantee on all work
  • Straight answers about what a repair can do
  • Work done at your home or business
  • No need to remove anything

Take a look at our prices page or resurfacing vs replacement cost guide.

How we price bath repair

Prices start from £95. We don’t charge extra for travel to Calder Grove. The price depends on:

  • Any earlier repairs that need removing first
  • The material and finish
  • How many items we do on one visit
  • Where the damage is and how we get to it

A repair is priced on what needs doing, not your postcode. The full price is agreed before booking, with no extras added later.

Send photos for a quote

When you take your pictures, a few simple things make all the difference:

  • A wider photo showing the whole bath
  • A coin or ruler next to the damage for scale
  • Natural light rather than flash
  • Any earlier repairs or coatings

For a price in Calder Grove, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.

Keeping it looking good

Good habits make a big difference to how long a repair lasts:

  • If an acrylic bath flexes, have its feet adjusted
  • Clean with warm water and a mild detergent
  • A dripping tap stains enamel, so fix it early
  • Rinse the bath after use, especially in hard water areas

Leave the repair to cure for as long as we say before using the bath. From then on, mild cleaning is all it needs.

If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and water can get through to the floor below.

How the visit works

Visits start with a quick look at the job together, so you know exactly what we are doing. Then the area is sheeted and masked and we start. It normally takes two to three hours for most chips, and we’ll keep you posted as we go.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. We match both the colour and the shine.
  5. We clear up and give you the curing time, normally until the following day.

How to prepare

  • Let us know if it has been repaired before
  • Plan for the room to be out of bounds to pets and children
  • Keep a parking space free if you can

Ask for a price

For most jobs, photos are all we need to give you a price. Add a line about what happened and your postcode, and we’ll send back a fixed quote and some dates.

Get a fixed price

Read more

Common problems we fix in Calder Grove

A cracked acrylic bath normally wasn’t supported properly. Legs that aren’t adjusted, a missing cradle or a soft floor let the bath move.

Typical reasons for a call-out include:

  • Chips on the rim or sides
  • Holes from dropped items
  • An old repair that has yellowed or come loose
  • Chips caused by builders

Questions to ask before you book

  • What happens if the damage is worse than the pictures show
  • How soon you can use it again
  • Whether the colour is mixed to match
  • What protection goes down before work starts

How to compare quotes

Our work in Calder Grove

Calder Grove is about 3 miles south-east of Ossett, in Wakefield. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. Our repair technicians cover all 101 towns and villages across Wakefield, from the larger towns to small villages. Our nearest city page is Leeds, about 11 miles away.

Our visits in WF4 work the same way as everywhere else we cover. You’ll find streets such as Sandpiper Road, Milton Close and Rockwood Crescent. Other places close to Calder Grove include Crigglestone (1 mile south-east), Durkar (1 mile north-east), Chapelthorpe (1 mile south-east), Hall Green (1 mile south-east) and Kettlethorpe (1 mile east). Larger places within reach include Wakefield (3 miles north-east), Castleford (9 miles north-east), Pontefract (10 miles east), Ossett (3 miles north-west), Normanton (6 miles north-east) and South Kirkby and Moorthorpe (10 miles east).

Around Calder Grove

In Calder Grove, that means homes near Church of St John the Divine, Crigglestone St James CofE Primary Academy and Horbury Academy and the streets around them. For rail, the closest station is Sandal & Agbrigg station, roughly 2.5 miles north-east. A little further out are Yorkshire Sculpture Park (2.7 miles south-west) and Clayton Hospital (3.1 miles north-east). For a walk, there’s Jaw Hill and Calder Park Wetlands Nature Reserve.

Map of Calder Grove © OpenStreetMap contributors

Different materials, different repairs

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, just like other baths.

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

What a repair can’t fix

Some problems need a builder, plumber or fitter rather than us:

  • Acrylic cracks with no access behind them
  • Water coming from the waste or taps rather than the bath
  • A steel bath rusted through

Not sure? Send photos and we’ll give you a straight answer.

Surfaces we repair

  • Pressed steel enamel
  • Whirlpool & spa baths
  • Acrylic
  • Cast iron enamel
  • Roll-top & freestanding
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.