East Riding of Yorkshire · England
Bath chip & crack repair in Carlton, East Riding of Yorkshire
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Carlton. Free, fixed quotes from your photos.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A failed DIY repair that’s discoloured or lifting
About our bath repair in Carlton
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. Our repair technicians work on roll-top & freestanding, cast iron enamel and pressed steel enamel, and common reasons people contact us are a chipped rim or side and damage beneath the taps.
A one-year guarantee comes as standard, so you’re covered after the visit.
- Where
- Carlton (DN14)
- Area hub
- East Riding of Yorkshire
- Guarantee
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Covering Carlton
Carlton is about 5 miles south of Selby, in East Riding of Yorkshire. From the centre of Carlton to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. We work in all 299 towns and villages in East Riding of Yorkshire, from the larger towns to small villages. You can also see our page for Leeds, about 23 miles away.
Our visits in DN14 work the same way as everywhere else we cover. From Station Road, High Street and Shire Green or anywhere nearby, a technician can come to you. Nearby, we also work in Camblesforth (1 mile north), Hirst Courtney (2 miles west), Barlow (3 miles north), Temple Hirst (3 miles west) and Brayton (5 miles north-west). Further out, we also cover Goole (6 miles east), Howden (7 miles east), Gilberdyke (12 miles east), Eggborough (5 miles west), Holme upon Spalding Moor (13 miles north-east) and Newport (14 miles east).
Near you in Carlton
Locally, our jobs take us to homes close to Foresters Arms, Church of St Mary and Holy Family Catholic High School, among other places. The closest station to Carlton is Snaith station, roughly 1.3 miles south of the centre. Further afield, we also cover the area around Goole and District Hospital (6 miles east).
Carlton: your questions answered
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
Is it worth repairing rather than replacing?
In most cases, yes. A repair skips the removal, fitting and redecorating. We will be honest if it’s not worth it.
Can you price it without visiting?
Typically, yes. Clear photos let us give you a fixed price without visiting.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Will you leave a mess?
We protect the room with dust sheets and masking first, and we clean up when we have finished.
Is the work guaranteed?
Yes, for a year. If there is a problem with the work in that time, we come back and put it right.
What areas do you cover?
Across the UK, and that includes Carlton. Our prices are the same everywhere.
Is a bath repair durable?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Repairing versus replacing in Carlton
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Our bath repair starts from £95. Every job is a little different, so each one is priced on its own. What’s damaged, how badly and how easy it is to reach all play a part, and doing several things on one visit costs less than separate visits.
Why us?
- Dust sheets down, tidy finish
- Accredited with CHAS, Constructionline and SafeContractor
- Work done at your home or business
- Fixed prices from your photos
Read our prices page or guide to resurfacing and replacement costs.
Places near Carlton
Other services in Carlton
DIY repairs versus a professional job
If you are set on a kit, follow its instructions closely and work on a clean, dry surface, and give it the full curing time. If it does not work out, we can still repair it properly.
If you’ve already tried a DIY fix, that is fine. We remove the old filler and start again, so it does not stop a professional repair. It does add a little time, so tell us about it when you send pictures.
Keeping it looking good
So the finish stays in good condition:
- Put a towel in the bath if you are working above it
- Store metal items away from the bath
- If an acrylic bath flexes, have its feet adjusted
- A dripping tap stains enamel, so fix it early
Give the repair the full curing time we recommend before running a bath. After that, gentle cleaning keeps it looking good.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
How we price bath repair
Repairs from £95. We charge the same across the UK, including Carlton. The price reflects:
- Where the damage is and how we get to it
- How many items we do on one visit
- Any earlier repairs that need removing first
- The type of damage
There are no surprise extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
How to get a fixed quote
We price nearly every job from photos. This is what to send:
- Any earlier repairs or coatings
- A wider photo showing the whole bath
- Where you are, by postcode
- Daylight if possible, and no flash reflection
Ring 0345 017 0787, or send us photos through the quote form. With a clear picture of the damage and one of the whole bath, we can give you a fixed price the same day in most cases.
The process
We agree an arrival time beforehand. On site, it takes a few hours. We leave the room clean and ready to use once it has cured.
- We clean the area and remove any loose enamel or rust.
- Next we fill the damage and sand it smooth and level.
- We mix the colour on the day to match your bath’s exact shade.
- Finish coats go on, then the repair is polished to blend in.
- Once it has cured, normally by the day after, the bath is ready to use.
Before we arrive
- Tell us about any previous repairs or coatings
- Mention any parking restrictions or tricky access
- Have a window or extractor fan available
Ask for a price
If you are in Carlton and want a price, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Signs you need bath repair in Carlton
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.
Typical reasons for a call-out include:
- Scuffs and scratches in the surface
- Rust by the waste and overflow
- A chipped rim or side
- A chip where the taps sit
What to look for in a quote
- What protection goes down before work starts
- If travel is included in the price
- Who turns up on the day
- How long it needs to cure
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
- Acrylic cracks with no access behind them
Not sure? Send pictures and we will give you a straight answer before booking.
What we work on
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Landlord and trade work in Carlton
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
About our accreditations · Every repair comes with a one-year guarantee.
