Carmarthenshire · Wales
Bath Repair in Carwe
Our technicians come to Carwe for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Scuffs and scratches in the surface
- Damage done while the bathroom was being fitted
How to care for the repair
Much of the damage we repair could have been avoided. These habits help:
- Keep abrasive pads and gritty cleaners away from the bath
- Use a soft cloth and washing-up liquid for everyday cleaning
- Keep metal cans and razors off the surface
- Have new chips seen to early
In the first few days, avoid putting weight or bottles on the repair. After that, clean it as you would the rest of the bath, avoiding abrasives.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
How we handle bath repair in Carwe
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. Typical jobs include impact holes in acrylic and damage beneath the taps, across pressed steel enamel, roll-top & freestanding and acrylic.
Peace of mind is built in: each job carries a one-year guarantee, and we will explain exactly what it covers when we quote.
- Where
- Carwe (SA17)
- County
- Carmarthenshire
- Cover
- A year, on every repair
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Page updated
- 23 October 2026
What a repair can’t fix
Some problems need a builder, plumber or fitter rather than us:
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
- Metal that has corroded all the way through
If in doubt, send pictures and we’ll say what we think before booking.
Materials we work on in Carwe
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Acrylic
- Pressed steel enamel
How the visit works
We agree an arrival time beforehand. On site, it takes two to three hours for most chips in most cases. We leave the room clean and you’ll know when it can be used.
- First, the area is cleaned and any loose enamel or rust is removed.
- We fill the damage and sand it flush with the surrounding surface.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- We leave it to cure; you can typically use the bath the next day.
Before we arrive
- Keep a parking space free if you can
- Avoid using the area for a few hours before we arrive
- Keep children and pets away from the room on the day
Getting a price
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can price the job.
Advice
Signs you need bath repair in Carwe
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
Contact us if you’ve noticed:
- Hairline or through cracks in acrylic
- A hole punched through by something heavy
- Scratches you can feel with a fingernail
- A chip where the taps sit
Before booking anyone
- Whether cleaning and preparation are in the price
- Whether they match the colour on site
- How your room will be protected
- How changes to the job are handled
Questions from Carwe
Are you accredited?
We are accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
How long does the repair take to cure?
Typically the next day. We confirm the time before we leave.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Can you repair a hole in a bath?
In most cases. Photos of the hole and the underside help us check.
Can rust on a bath be repaired?
Yes, very frequently. We take it back to sound metal, seal it, fill it and match the colour.
Can you repair a failed DIY repair?
Yes, we do this frequently. The old material comes out, any rust is treated, then we repair it properly.
Can you repair a crack in an acrylic bath?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
Can you quote from photos?
Typically, yes. Clear pictures let us give you a fixed quote without visiting.
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price depends on:
- The type of damage
- Whether we combine several jobs
- Whether old repairs or coatings need taking off
- The material
A repair is priced on what needs doing, not where you live. You will see the full price before booking, with nothing added on the day.
Quotes from your pictures
Photographing the damage takes a minute, and it saves a visit. Please include:
- Any earlier repairs or coatings
- What it’s made of, if you know
- A coin beside the damage so we can judge size
- Daylight if possible, and no flash reflection
Email us pictures of the damage and a wider shot of the whole item, and tell us you’re in Carwe, and we’ll come back with a fixed quote.
About Carwe
Carwe (Welsh: Carway) is about 5 miles north-west of Llanelli, in Carmarthenshire. We agree a date that works for you, and you will know when to expect us, so you’re not left waiting in all day. Carwe is one of 195 places in Carmarthenshire we cover.
Here we cover the SA17 postcode area. Local streets include Heol y Plas, Ffordd y Glowyr and Clos y Nant. Nearby, we also work in Trimsaran (1 mile south-west), Pen-y-mynydd (1 mile south), Waun y Clyn (1 mile south-west), Heol-ddu (2 miles south) and Pont-iets (2 miles north). Within a short drive, we also cover Llanelli (5 miles south-east), Carmarthen (9 miles north), Llanelli Rural (5 miles south-east), Bigyn (5 miles south-east), Wern (5 miles south-east) and Ammanford (11 miles east).
Landmarks near Carwe
We visit homes around Bryn Forest Inn and the streets around them. Carwe’s nearest station is Pembrey & Burry Port station, about 3.6 miles south. Nearby you will also find Waun Twmpath Motte (2.3 miles south) and Prince Philip Hospital (4.9 miles south-east). The countryside around Carwe includes Pen Caerbigyn.
For landlords and businesses
We’re used to working with agents and managing companies. Send the address, photos and access details and we will arrange it.
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface isn’t prepared the repair won’t last.
Should you replace it?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
What you get with us
- Same prices wherever you are
- Generally one visit, start to finish
- We come to you, anywhere in the UK
- Straight answers about what a repair can do
Take a look at our prices page or bath cost comparison.
Other services in Carwe
About our accreditations · Every repair comes with a one-year guarantee.
