County Durham · England
Bath chip & crack repair in Catchgate, County Durham
Chip and crack repairs to enamel, acrylic and cast iron baths for householders, landlords and businesses in Catchgate. Free, fixed quotes from your photos.
- Repairs from £95
- A chipped rim or side
- Chips caused by builders
What bath repair costs
Repairs from £95. We give every job a fixed price from photos. These are the things that affect it:
- What kind of damage it is
- How much damage there is
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Send pictures and we’ll give you the exact figure.
How to get a fixed price
Most quotes are done from photos alone. To make it quick:
- Details of any past repairs
- A wider photo showing the whole bath
- A coin or ruler next to the damage for scale
- The material, if you know it
No survey visit is needed: we price from pictures. Send them through the quote form, or call 0345 017 0787 if you’d rather talk it through.
Bath repair in Catchgate, done in place
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We’re often asked to fix a kit repair that didn’t last and a chip where the taps sit, on cast iron enamel, pressed steel enamel and roll-top & freestanding.
You are covered for a year from the day of the repair. If anything is not right, ring us and we’ll sort it.
- Location
- Catchgate (DH9, DH7)
- Area hub
- County Durham
- Guarantee
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
When a repair is not the answer
To be straight with you, there are a few things a repair won’t fix:
- Cracks in parts of an acrylic bath we cannot get to from below
- A steel bath rusted through
- Water coming from the waste or taps rather than the bath
Send us photos and we will tell you honestly before you book.
What we work on
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Whirlpool & spa baths
- Roll-top & freestanding
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Rinse the bath after use, especially in hard water areas
- Check that an acrylic bath doesn’t move when you stand in it
- A dripping tap stains enamel, so fix it early
- Keep metal cans and razors off the surface
Look after the repair the same way as the bath: warm water, washing-up liquid and a soft cloth. Avoid scourers and gritty cream cleaners.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Landlords, agents and businesses in Catchgate
We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We will fit around changeovers where we can.
What your bath is made of matters
Pressed steel
Steel baths are lighter than cast iron, but have a similar enamel surface. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s the part we put right.
When to call us in Catchgate
Dropped items cause the majority of chips, and a lot happen during bathroom refits. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
Send us a picture if you notice any of these:
- Damage done while the bathroom was being fitted
- Deep scratches in acrylic
- Chips along the edge of the bath
- An old repair that has yellowed or come loose
Comparing quotes
- How long the guarantee is and what it covers
- Whether cleaning and preparation are in the price
- How your room will be protected
- Whether the price is fixed and includes VAT
Places near Catchgate
Also in Catchgate
Our work in Catchgate
Catchgate is about 2 miles west of Stanley, in County Durham. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We cover all 329 towns and villages in County Durham. We work right across the region, from Catchgate to Newcastle upon Tyne (about 10 miles away).
We work across DH9 and DH7. We regularly work on streets such as Kyo Road, North Road and Greentree Lane and the roads around them. Other places close to Catchgate include Harelaw (1 mile north), Annfield Plain (1 mile south-east), East Kyo (1 mile east), Greencroft (1 mile south) and Harperley (1 mile north-east). Further out, we also cover Durham (9 miles south-east), Consett (4 miles west), Bishop Auckland (15 miles south), Spennymoor (13 miles south-east), Chester-le-Street (7 miles east) and Crook (11 miles south).
Near you in Catchgate
In Catchgate, that means homes near Catchgate Primary School, Church of St Thomas and North Durham Academy, among other places. Well-known places in the area include Shotley Bridge Hospital (3.8 miles west) and Derwentside (0.5 miles west).
DIY repairs versus a professional job
If you’re set on a kit, follow its instructions closely, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
FAQs for Catchgate
When can you do it?
We will give you dates with your quote. If it’s urgent, say so and we will do what we can.
Will there be a smell?
There may be a mild smell during the work.
I rent my home. Can I book you?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
What does bath repair cost?
Repairs from £95. Every job gets a fixed price from your photos. Send a close-up of the damage and a wider photo and your postcode.
What do you need from me?
Send pictures through the quote form or call 0345 017 0787, and we’ll do the rest.
Can I get a quote without a visit?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Can you repair a chip on a coloured bath?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
What we do, step by step
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a morning or an afternoon, and we finish with a tidy-up and a look at the finished work together.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Getting ready for the visit
- Let us know if it has been repaired before
- Clear toiletries, mats and anything else from around the area
- Let us know which floor the room is on
How to get a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and no obligation.
Read more
About our accreditations · Every repair comes with a one-year guarantee.
