County Durham · England
Bath Repair for Stony Heap homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Stony Heap and across County Durham. Send pictures for a free, fixed quote.
- Repairs from £95
- Snagging damage from a refit
- A failed DIY repair that is discoloured or lifting
Stony Heap and nearby
Stony Heap is about 1 mile west of Annfield Plain, in County Durham. Jobs in Stony Heap are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We cover 329 places across County Durham, from the larger towns to small villages. Our jobs stretch from Stony Heap to Newcastle upon Tyne (about 11 miles away).
We work across DH8 and DH9 and the streets around it. You will find streets such as Stonyheap Lane and Hangingstone Lane, and we cover them all. Other places close to Stony Heap include Iveston (1 mile south-west), Greencroft (1 mile south-east), Catchgate (1 mile north-east), Annfield Plain (1 mile east) and Harelaw (1 mile north-east). Larger places within reach include Durham (10 miles south-east), Consett (3 miles west), Bishop Auckland (15 miles south), Spennymoor (13 miles south-east), Chester-le-Street (8 miles east) and Stanley (3 miles east).
Near you in Stony Heap
Locally, our jobs take us to homes close to Catchgate Primary School, Church of Our Lady and St Joseph and St Bede's Catholic School and Sixth Form College, among other places. Well-known places in the area include Shotley Bridge Hospital (2.9 miles west) and Derwentside (0.9 miles north-east).
Bath repair in Stony Heap, done in place
Whatever has happened to the bath, we aim for the same result: a repair that’s smooth, sound and hard to spot. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. If you’re dealing with a chip where the taps sit and rusty patches near the plughole, we can generally put it right, on pressed steel enamel, whirlpool & spa baths and cast iron enamel alike.
You’re covered after we leave: each job carries a one-year guarantee, and we explain what it covers before you book.
- Location
- Stony Heap (DH8, DH9)
- County
- County Durham
- Cover
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Why repair rather than replace?
People often assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, without the cost and upheaval of replacing it. Prices start from £95. Set against the cost of replacement, a repair is usually a fraction of the price, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
What you get with us
- We leave the room as we found it
- Generally one visit, start to finish
- Accredited with CHAS, Constructionline and SafeContractor
- Colour-matched on site
Read our full price list or bath cost comparison.
Places near Stony Heap
Also in Stony Heap
Signs you need bath repair in Stony Heap
Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.
The things clients typically mention when they call include:
- Rust by the waste and overflow
- A chip where the taps sit
- Chips on the rim or sides
- A kit repair that didn’t last
What your quote should include
- A fixed quote, and whether VAT is included
- Whether cleaning and preparation are in the price
- What happens if they find more damage
- What protection goes down before work starts
What we cannot put right
We will not take on work that won’t last, so these are the limits:
- Leaking fittings, which need a plumber
- Acrylic cracks with no access behind them
- Wear across the entire surface, which needs re-enamelling
Send us pictures and we’ll tell you honestly.
Materials we work on in Stony Heap
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Acrylic
Stony Heap questions
Can you repair a hole in a bath?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Do I have to be there?
We need someone to let us in. After that, you can carry on with your day.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
What if the damage is worse than the photos show?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
Is repairing better than replacing?
Usually, if the item is otherwise sound. A repair avoids removal and making good. If replacing would be better, we’ll say so.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses.
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
How long before I can use the bath?
Most baths can be used the day after. We confirm the time before we leave.
Landlords, agents and businesses in Stony Heap
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
What your bath is made of matters
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Acrylic
Acrylic feels warm and is light, but it relies on good support. Cracks are strengthened from behind before the front is finished.
Looking after it afterwards
So the finish stays in good condition:
- Keep abrasive pads and gritty cleaners away from the bath
- Check that an acrylic bath does not move when you stand in it
- Have new chips seen to early
- Keep metal cans and razors off the surface
For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job typically takes a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the following day.
Preparing for the visit
- Let us know which floor the room is on
- Clear the area around the damage
- Keep a parking space free if you can
Getting a price
Getting a price is easy: take a close-up of the damage and a photo from further back, send them over with your postcode, and we will reply with a fixed price. Quotes are free and you’re under no obligation.
Related advice
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
A kit can be fine for a tiny mark out of sight. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
About our accreditations · Every repair comes with a one-year guarantee.
