Essex · England

Bath Repair for Chalk End homes

Problem with your bath in Chalk End? We put it right where it is, match it on site and guarantee the work for a year.

  • Repairs from £95
  • Damage beneath the taps
  • Scratches you can feel with a fingernail
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Chalk End

Landlord and trade work in Chalk End

For anyone letting property in or around Chalk End, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.

We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.

Bath repair at your home in Chalk End

We see every kind of bath damage: dropped-bottle chips, plughole rust, acrylic cracks and impact holes. All of it is repaired where the bath stands. We work on roll-top & freestanding, pressed steel enamel and acrylic, and people most often call us about rust by the waste and overflow and chips caused by builders.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Before and after: a damaged acrylic bath corner repaired in place
Location
Chalk End (CM1)
Area hub
Essex
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Last updated
23 October 2026

What happens on the day

We turn up when we said we would and looks over the damage before anything else. Dust sheets and masking tape go down before we open a single tin. Most visits take a few hours, and the room is left clean and tidy.

  1. First, we check the damage against your photos and agree the plan.
  2. Any rust and loose material comes out, and the area is degreased.
  3. The damage is filled in layers and shaped to the curve of the bath.
  4. The colour is tinted by hand until it matches.
  5. The repair is polished to the same gloss as the bath and left to cure.

Before we arrive

  • Point us to the nearest place to park
  • Open a window if you can
  • Clear the area around the damage

Ask for a price

To get a price, send a couple of pictures through our quote form or ring us. We’ll say right away if a repair is the right fix.

Get a free quote

Related advice

About Chalk End

Chalk End is about 6 miles west of Chelmsford, in Essex. Whether you’re in the middle of Chalk End or on the outskirts, the service is the same: fixed prices, tidy work and a one-year guarantee. Chalk End is one of 644 towns and villages in Essex where we work. You can also see our page for London, about 27 miles away.

Jobs in CM1 are booked in the same way as anywhere else. Nearby, we also work in Good Easter (1 mile north), Boyton Cross (2 miles south-east), Roxwell (2 miles south-east), Margaret Roding (2 miles north-west) and Shellow Bowells (2 miles south-west). We also work in nearby towns such as Chelmsford (6 miles east), Basildon (14 miles south), Braintree (12 miles north-east), Harlow (10 miles west), Brentwood (10 miles south) and Maldon (14 miles east).

Near you in Chalk End

Typical jobs here are in homes near Church of St Andrew and the streets around them. Nearby you will also find Willingale Doe (2.3 miles south-west) and Broomfield Hospital (4.6 miles east).

Map of Chalk End © OpenStreetMap contributors

Repair or replace: which is better?

Swapping a damaged bath for a new one typically means a plumber, lifting out the old bath, re-tiling and a new panel and disposing of the old one. Repairing it deals only with the damage in a single visit. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why book with us

  • Dust sheets down, tidy finish
  • One-year guarantee on every repair
  • CHAS, Constructionline and SafeContractor accredited
  • Colour-matched on site

Read our full price list and resurfacing vs replacement cost guide.

How to care for the repair

Most damage we see is avoidable. These habits help:

  • Rinse it down after each bath
  • Store metal items away from the bath
  • If an acrylic bath flexes, have its feet adjusted
  • Use a soft cloth and washing-up liquid for everyday cleaning

There’s nothing special to do after a repair, beyond gentle cleaning. Avoid bleach-based and gritty cleaners.

Don’t leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

FAQs for Chalk End

What happens after I send pictures?

We check the damage, the material and your postcode, then reply with a quote and the next dates we have.

Do you repair coloured baths?

Yes, coloured baths are no problem. The colour is tinted by hand on the day.

Is it safe with children and pets around?

Keep pets and children away from the work area on the day, so the repair is not disturbed while it cures.

Can I get a quote without a visit?

In nearly every case. If photos don’t show enough, we will ask for another angle.

Do you work for landlords and businesses?

We do, regularly. We can quote for several properties together and work between tenancies.

I rent my home. Can I book you?

Yes, but check with your landlord or agent first. Landlords are often glad to have it sorted.

Is a holed acrylic bath repairable?

Generally, yes, if we can reach behind it. The hole is backed, filled and refinished to match.

Do you work in Chalk End?

Yes, we do. Technicians travel to Chalk End from across the region, with no extra charge for travel.

When to call us in Chalk End

The usual cause is something heavy dropped into the bath, and a lot happen during bathroom refits. Cracks in acrylic have a different cause: the bath is not properly supported, so it flexes under weight.

Most people get in touch after spotting something like this:

  • Rusty patches near the plughole
  • A chipped rim or side
  • A failed DIY repair that’s discoloured or lifting
  • Hairline or through cracks in acrylic

Comparing quotes

  • Whether there are any call-out or travel charges
  • Is the price fixed, and does it include VAT?
  • What happens if they find more damage
  • Aftercare advice

10 questions to ask before you book

Honest limits

To be straight with you, some problems need a different fix:

  • A bath worn all over, where resurfacing makes more sense
  • Leaks from the waste or overflow fittings (a plumber’s job)
  • Acrylic cracks with no access behind them

If in doubt, send pictures and we’ll say what we think.

Materials we work on in Chalk End

  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths
  • Roll-top & freestanding

What your bath is made of matters

Composite and resin

Composite baths are dense and solid. Chips and scratches are filled and matched, just like other baths.

Cast iron

Cast iron baths are so heavy that repairing in place makes obvious sense. Only the enamel surface wears or chips, and that is what we repair.

Can I fix it myself?

It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.

For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.