Coventry · England

Bath Repair in Chapelfields

Bath repair for Chapelfields, without a refit. Send us pictures for a fixed quote, then book a visit.

  • Repairs from £95
  • Impact holes in acrylic
  • Damage done while the bathroom was being fitted
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Chapelfields

Bath repair in Chapelfields, done in place

We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath. You can generally use the bath the following day. Common call-outs are for scuffs and scratches in the surface and rust spots around the plughole, across cast iron enamel, roll-top & freestanding and whirlpool & spa baths.

Whatever the size of the job, you get the same one-year guarantee in Chapelfields and across Coventry.

Where
Chapelfields (CV5, CV1, CV6)
Area hub
Coventry
Warranty
12 months on all our work
Quotes
From £95. Free, fixed price from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Broken acrylic bath corner, rebuilt and refinished (before and after)

Landlords, agents and businesses in Chapelfields

Landlords, letting agents and housing providers in Chapelfields use us as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.

Builders use us to fix snagging damage before handover, saving last-minute replacements. We can visit several plots in one trip.

Repairing versus replacing in Chapelfields

A new bath costs more than the bath itself: taking out the old one, plumbing, tiling, a panel and redecorating. A repair is one job, done in one visit. Prices start from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Why Chapelfields clients choose us

  • Honest advice, even when it means no job
  • We leave the room as we found it
  • Colours mixed by hand to suit your surface
  • A fixed quote before booking

Read our prices page or bath cost comparison.

What happens on the day

Arrival times are agreed in advance, so you know when to expect us. Once we’re there, the work takes a few hours, depending on the damage. We leave the room clean.

  1. We start by looking at the damage and confirming the plan with you.
  2. Any rust and loose material comes out, and the area is degreased.
  3. We build up the filler in layers, shaping it to the bath.
  4. We tint the finish by hand to match the bath.
  5. The repair is polished to the same gloss as the bath and left to cure.

Preparing for the visit

  • Let us know about parking or access
  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can

How to get a price

Most clients in Chapelfields get their price from pictures. Tell us what happened and where you are, and we will reply with a fixed quote and the earliest dates we have.

Get a free quote

Related advice

What your bath is made of matters

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

Acrylic

An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.

Chapelfields questions

What happens after I send pictures?

You get a fixed quote and available dates. If we need another angle, we’ll ask.

Do the materials smell?

Expect a mild smell while we are working.

Will you leave a mess?

Dust sheets and masking go down before we start, and we clean up when we have finished.

What if the damage is worse than the pictures show?

We’ll show you and explain before doing anything extra. You will not be charged for anything you haven’t agreed.

Does someone need to be in?

Yes. We need access to the room while we work, at a time we agree with you.

Can you fix rust around the plughole?

Yes. We remove the rust and loose enamel, fill the area, then colour-match the finish.

I tried a repair kit. Can you fix it?

Yes. We take out the old repair and do it properly. Mention it when you send photos.

When can you do it?

Your quote comes with available dates. If it’s urgent, say so and we will do what we can.

What bath repair costs

Prices start from £95. You will not pay by the hour. The price is based on:

  • The type of damage
  • What the surface is made of
  • The size and number of damaged areas
  • The colour and finish to match

We charge the same wherever you are, so there is no premium for Chapelfields. The job itself decides the price: the material, the amount of damage and how many items.

Send photos for a quote

Before you send pictures, a few simple things make all the difference:

  • A picture taken from further back
  • One sharp close-up of the damage
  • Any details about the material
  • Details of any past repairs

Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, add your postcode and send them to us. What comes back is a fixed quote, not a guess.

DIY repairs versus a professional job

A DIY attempt isn’t a disaster. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send pictures, as it can add time.

The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.

Looking after it afterwards

Looking after the surface is easy, and it makes a real difference:

  • Stick to mild cleaners and a soft cloth
  • Cover the bath during DIY or decorating
  • A dripping tap stains enamel, so fix it early
  • Check that an acrylic bath does not move when you stand in it

A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and rinse after use.

Do not leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

Our work in Chapelfields

Chapelfields is about 1 mile west of Coventry, in Coventry. We work in every kind of home, from flats and terraces to detached houses and new builds, as well as offices, shops and holiday lets. Our repair technicians cover 88 places across Coventry. You can also see our page for Birmingham, about 16 miles away.

Here we cover the CV5, CV1 and CV6 postcode area. You’ll find streets such as Aston Road, Butts Road and Watson Road. Being close to the A4114, Chapelfields is simple for us to get to. Other places close to Chapelfields include Earlsdon (1 mile south-east), Whoberley (1 mile west), Spon End (1 mile south-east), Coundon (1 mile north) and Fletchamstead (1 mile west). We also work in nearby towns such as Ernesford Grange (3 miles east), Foleshill (3 miles north-east), Wood End (4 miles north-east), Bell Green (3 miles north-east), Binley (4 miles east) and Alderman's Green (3 miles north-east).

Near you in Chapelfields

We visit homes around Ruined Cathedral Church of St Michael, St. Mary Magdalen and Hearsall Community Academy. Other local landmarks include Hearsall Common (less than half a mile south-west), Barr's Hill School (1 mile north-east), The Black Horse pub (under half a mile north-east) and Bablake School (0.8 miles north-east). The nearest railway station is Canley station, roughly 0.7 miles south-west. Further afield, we also cover the area around Ford's Hospital (1 mile east) and Arena Park Shopping Centre (3.2 miles north-east). The countryside around Chapelfields includes Brandon Marsh and Oxpen Meadow Lake.

Map of Chapelfields © OpenStreetMap contributors

When we would advise against a repair

We won’t take on work that won’t last, so here’s what a repair can’t put right:

  • A whole bath that’s dull or worn, where a full re-enamel is the better fix
  • Leaking fittings, which need a plumber
  • Metal that has corroded all the way through

Send us pictures and we will tell you honestly before you book.

Materials we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Roll-top & freestanding
  • Acrylic
  • Cast iron enamel
CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.