Coventry · England

Bath Repair for Fletchamstead homes

Problem with your bath in Fletchamstead? We put it right where it is, match it on site and back it with a one-year guarantee.

  • Repairs from £95
  • Scratches you can feel with a fingernail
  • Cracks in an acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Need bath repair in Fletchamstead?

Bath repair in Fletchamstead without replacing anything

Most of our bath repairs take a few hours, and the bath is back in use the following day. You will not need a plumber or tiler, because nothing is disconnected. We are often asked to fix damage beneath the taps and a kit repair that didn’t last, across whirlpool & spa baths, cast iron enamel and pressed steel enamel.

The work is covered for a year after we finish. Just call us if there is a problem and we’ll come back.

Location
Fletchamstead (CV4, CV5)
Area hub
Coventry
Warranty
One year on every repair
Quote
From £95. Fixed and free, based on photos
Telephone
0345 017 0787
Page updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Fletchamstead and nearby

Fletchamstead is about 2 miles south-west of Radford, in Coventry. Jobs in Fletchamstead are booked in like any other job: a fixed price from your photos, then a visit to do the work. Our technicians cover 88 places across Coventry, from the larger towns to small villages. Our nearest city page is Birmingham, about 15 miles away.

All of CV4 and CV5 is within our area, from the main roads to the quietest streets. Streets in the area include Gerard Avenue, Herald Avenue and Kingdom Avenue, and we cover them all. If you are just outside Fletchamstead, we cover Whoberley (1 mile north-east), Chapelfields (1 mile east), Earlsdon (1 mile east), Eastern Green (1 mile north-west) and Allesley Green (1 mile north-west). Larger places within reach include Coventry (3 miles east), Hillfields (3 miles east), Bishopsgate Green (3 miles north-east), Ernesford Grange (4 miles east), Foleshill (5 miles north-east) and Wood End (5 miles north-east).

Around Fletchamstead

Typical jobs here are in homes near The Sovereign pub, Tile Hill Wood School and St James. Nearby too are Templars Primary School (0.5 miles west), Finham Park 2 (0.6 miles west) and Hearsall Common (1 mile east). For rail, the closest station is Canley station, roughly 0.5 miles east of the centre. Nearby you will also find Coventry Watch Museum (1.9 miles east) and Ford's Hospital (2.1 miles east). The countryside around Fletchamstead includes Oxpen Meadow Lake.

Map of Fletchamstead © OpenStreetMap contributors

FAQs for Fletchamstead

Is a bath repair durable?

Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.

I tried a repair kit. Can you fix it?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

Do you work in Fletchamstead?

Yes, we do. We send a technician to Fletchamstead for every job, with no extra charge for travel.

How long does the repair take to cure?

Most baths can be used the next day. We will tell you the exact curing time when we finish.

It’s been repaired before. Can you still fix it?

Yes, we often do. It can add a little time, which we include in the quote.

Do you hold any accreditations?

Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.

Something went through my bath. Can it be fixed?

Often, if there is access underneath. We back the hole, fill it and refinish the surface.

Will you leave a mess?

No. The work area is masked and covered, and we take our waste away with us.

Different materials, different repairs

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.

When to call us in Fletchamstead

Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, often before anyone notices. Snagging repairs like these are a regular job for us.

Look out for these signs:

  • Damage beneath the taps
  • A cracked acrylic bath
  • Holes from dropped items
  • Chips along the edge of the bath

Before booking anyone

  • Whether there are any call-out or travel charges
  • What aftercare is recommended
  • Whether a trained technician does the job
  • What happens if they find more damage

How to compare quotes

What a repair can’t fix

Honesty matters more than a booking, so here’s what a repair won’t do:

  • Metal that has corroded all the way through
  • Wear across the whole surface, which needs re-enamelling
  • Leaks from the waste or overflow fittings (a plumber’s job)

Not sure? Send pictures and we will give you a straight answer.

Surfaces we repair

  • Whirlpool & spa baths
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Roll-top & freestanding

Repair or replace in Fletchamstead?

For damage in one or two places, a repair is the obvious choice. It’s a fraction of the cost of a new bath and fitting, it’s done in one visit, and nothing else in the room changes. Our bath repair starts from £95. The price depends on the type and amount of damage, what it’s made of and how many items we do on one visit. You get a fixed price from your photos, so you know the cost before you book.

Why Fletchamstead clients choose us

  • One visit for most repairs
  • Same prices wherever you are
  • Accredited with CHAS, Constructionline and SafeContractor
  • One-year guarantee on every repair

Take a look at our full price list and bath cost comparison.

Work for landlords and builders

We also carry out snagging repairs for builders and developers, putting right damage done during fitting. We hold CHAS, Constructionline and SafeContractor accreditations.

Housing associations and facilities teams use us for planned and reactive repairs in Coventry and across the UK. A repair avoids taking out and refitting, which is easier on the people living there.

How we price bath repair

Repairs from £95. There is no area surcharge for Fletchamstead. The price reflects:

  • The colour and finish to match
  • How many areas need work
  • Whether we combine several jobs
  • Previous DIY repairs that have to come out

It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.

Quotes from your pictures

Good photos mean an accurate price. Here’s what helps:

  • Good light, ideally daylight, without flash glare
  • Whether it’s been repaired or coated before
  • Something in shot to show the size
  • One picture of the entire bath

For a price in Fletchamstead, the easiest route is photos: one close up, one from further back, plus your postcode. You’ll get a fixed quote with dates to choose from.

The process

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the job takes a few hours, depending on the damage, and we finish with a tidy-up and a look at the finished work together.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Getting ready for the visit

  • Keep a parking space free if you can
  • Open a window if you can
  • Clear the area around the damage

Ask for a price

You don’t need a survey visit. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed quote.

Get a free quote

Read more

Keeping it looking good

A little care keeps the finish looking good. We recommend:

  • Get any new chip repaired before it rusts
  • Make sure an acrylic bath is firm underfoot
  • Keep metal cans and razors off the surface
  • Protect the bath with a towel when doing jobs nearby

Treat the repaired area like the rest of the bath: warm water, washing-up liquid and a soft cloth. Keep scouring pads and gritty cleaners away from it.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.