Surrey · England
Bath chip & crack repair in Charleshill, Surrey
Bath repair in Charleshill without the cost of replacing. Send us pictures for a fixed quote, then book a visit.
- Repairs from £95
- Rust by the waste and overflow
- Holes from dropped items
Landlords, agents and businesses in Charleshill
We regularly price jobs from inventory or check-out pictures. That means we can quote before you even visit the property, and we can arrange access with the tenant directly if that helps.
We work for landlords, letting agents and housing providers in Charleshill as well as homeowners. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
About our bath repair in Charleshill
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, your tiles stay as they are, and the repaired area is colour matched so it blends in. Our repair technicians work on pressed steel enamel, cast iron enamel and acrylic, and the jobs we see most are holes from dropped items and chips under the taps.
You get a one-year guarantee, the same in Charleshill as everywhere else we work.
- Area
- Charleshill (GU10)
- Area hub
- Surrey
- Warranty
- One year on every repair
- Quotes
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Towns and villages near Charleshill
Also in Charleshill
What your bath is made of matters
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Keeping it looking good
Good habits make a big difference to how long a repair lasts:
- Get a dripping tap fixed promptly
- Don’t leave razors or cans standing in the bath
- Rinse the bath after use, especially in hard water areas
- If an acrylic bath flexes, have its feet adjusted
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Deal with new chips early, before rust can start.
Avoid standing in a cracked acrylic bath until it’s fixed. Every use opens the crack a little more, and it can start to leak underneath.
What we cannot put right
Before booking, it’s worth knowing the limits:
- A bath worn all over, where resurfacing makes more sense
- Water coming from the waste or taps rather than the bath
- Cracks in parts of an acrylic bath we cannot get to from below
Not sure? Send pictures and we’ll give you a straight answer.
Materials we work on in Charleshill
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Acrylic
Prices and what affects them
Repairs from £95. A fixed quote means you know the cost before booking. We take into account:
- The colour and finish to match
- Previous DIY repairs that have to come out
- The material
- How many items we do on one visit
The price reflects the work involved, not your postcode. You’ll see the full price before you book, with nothing added on the day.
Getting a price from photos
Almost every job we do is priced from pictures. This is what to send:
- A coin or ruler next to the damage for scale
- A wider photo showing the whole bath
- Good light, ideally daylight, without flash glare
- Details of any past repairs
Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can give you a fixed price.
What happens on the day
We work cleanly and quietly, so you can carry on at home. We protect the area first, then the work takes two to three hours for most chips. At the end we talk you through how soon it can be used and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- We tint the finish by hand to match the bath.
- The repair is polished to the same gloss as the bath and left to cure.
How to prepare
- Clear the area around the damage
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Ask for a price
Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Questions from Charleshill
What happens next?
We look at the photos and reply with a fixed price and some dates. If we need another angle, we’ll ask.
Is there a guarantee?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Can I get a quote without a visit?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
Can you match an avocado or pink bath?
Yes, we match coloured baths too. The colour is tinted by hand on the day.
What information do you need?
Just photos, your postcode and a contact number. On the day, access to the room.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It’s covered by our one-year guarantee.
Can you repair several things at once?
Yes. Combining jobs on one visit brings the cost down. Include pictures of each item.
Are you accredited?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
What we’re called out for in Charleshill
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
These are the problems we are asked about most:
- Rust spots around the plughole
- A kit repair that didn’t last
- Cracks in an acrylic bath
- A chipped rim or side
Comparing quotes
- What happens if the damage is worse than the photos show
- What protection goes down before work starts
- Whether there are any call-out or travel charges
- A fixed quote, and whether VAT is included
Charleshill and nearby
Charleshill is about 3 miles south-east of Farnham, in Surrey. Our technicians come to homes and businesses in Charleshill and the surrounding area, so you do not need to take anything anywhere. We work in 395 places in Surrey, from the larger towns to small villages. We work right across the region, from Charleshill to London (about 35 miles away).
We cover every part of the GU10 postcode area and the streets around it. Whether you live on Farnham Road and Whitmead Road or anywhere nearby, a technician can come to you. Main roads around Charleshill include the B3001, which makes travel easy. If you’re just outside Charleshill, we cover Tilford (1 mile west), Elstead (1 mile south-east), Tilford Common (2 miles south-west), Tilford Reeds (2 miles west) and Rushmoor (3 miles south-west). Within a short drive, we also cover Guildford (8 miles north-east), Woking (11 miles north-east), Camberley (10 miles north), Farnham (3 miles north-west), Frimley (8 miles north) and Haslemere (7 miles south).
Local landmarks in Charleshill
We visit homes around Waverley Abbey CofE Junior School, Thundry Meadows and Church of St James and the streets around them. The nearest railway station is Farnham station, about 3.2 miles north-west of the centre. Nearby you’ll also find Milford Hospital (4.6 miles east) and Seale and Tongham (1.9 miles north). Not far away are Runfold Wood and Upper Lake.
About our accreditations · Every repair comes with a one-year guarantee.
