Surrey · England
Bath chip & crack repair in Rushmoor, Surrey
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Rushmoor, with a one-year guarantee on every repair.
- Repairs from £95
- A cracked acrylic bath
- Rust by the waste and overflow
Work for landlords and builders
We regularly price jobs from inventory or check-out photos. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
For anyone letting property in or around Rushmoor, we will quote for several properties at once. Just send pictures for each address and we will come back with a combined price.
Bath repair in Rushmoor, done in place
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. Most baths can be used again the day after. We regularly repair pressed steel enamel, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are a failed DIY repair that’s discoloured or lifting and a hole punched through by something heavy.
Every repair comes with our one-year guarantee.
- Where
- Rushmoor (GU10)
- Area hub
- Surrey
- Warranty
- A year, on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Call
- 0345 017 0787
- Last updated
- 23 October 2026
Our work in Rushmoor
Rushmoor is about 4 miles south-east of Farnham, in Surrey. Whether you’re in the middle of Rushmoor or on the outskirts, the service is the same: a fixed quote, a tidy visit and a guarantee. Rushmoor is one of 395 towns and villages in Surrey we cover. You can also see our page for London, about 37 miles away.
Our visits in GU10 are booked in the same way as anywhere else. We regularly work on streets such as Sandy Lane, Lowicks Road and Tilford Road and the roads around them. Neighbouring places we cover include Tilford Common (1 mile north), Pitch Place (1 mile south-east), Crosswater (1 mile south-west), Thursley (2 miles east) and Green Cross (2 miles south). Further out, we also cover Guildford (10 miles north-east), Woking (13 miles north-east), Camberley (12 miles north), Farnham (4 miles north-west), Frimley (11 miles north) and Haslemere (5 miles south).
Local landmarks in Rushmoor
Locally, our jobs take us to homes close to Bel And The Dragon-Churt pub and The Flashes. The closest station to Rushmoor is Farnham station, roughly 4.2 miles north-west of the centre. A little further out are Haslemere and District Hospital (4.9 miles south) and Farnham Castle (4.8 miles north-west). For a walk, there’s Gibbet Hill and Upper Lake.
Questions from Rushmoor
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. The rest of the house is unaffected.
Is a cracked acrylic bath repairable?
Most of the time. We reinforce the crack from behind, then fill and refinish the front, so we need access under the bath.
Will the repair last?
A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.
Can you repair a hole in a bath?
In most cases. Send us a photo of the hole and one from under the bath if you can.
Does someone need to be in?
Yes. We need access to the room while we work, at a time that suits you.
Can rust on a bath be repaired?
Yes, it’s one of the most common repairs we do. We take it back to sound metal, seal it, fill it and match the colour.
Do you hold any accreditations?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Which areas do you work in?
All of Surrey, and the rest of the UK. There is no extra charge for travel.
Keeping it looking good
Good habits make a big difference to how long a repair lasts. Here’s what we suggest:
- Cover the bath during DIY or decorating
- Keep abrasive pads and gritty cleaners away from the bath
- Have new chips seen to early
- Don’t leave razors or cans standing in the bath
Do not leave razors, cans or hair grips in the bath, as they can leave rust marks. And fix dripping taps promptly.
A small chip is a quick job. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
The process
We work cleanly and quietly, so you can stay at home while we’re there. We protect the area first, then the work takes a morning or an afternoon. At the end we talk you through how soon it can be used and how to care for it.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Move bottles, mats and clutter away from the area
Getting a price
We price from pictures so you don’t have to wait in for a survey. Use the quote form, or ring 0345 017 0787 to talk it through, and you will get a fixed figure back.
Related advice
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Towns and villages near Rushmoor
More services for Rushmoor
Do you need bath repair in Rushmoor?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
The things customers normally mention when they call are:
- Scuffs and scratches in the surface
- Cracks in an acrylic bath
- An old repair that has yellowed or come loose
- Chips caused by builders
Before booking anyone
- What the guarantee covers, and for how long
- How to look after the finish
- Whether the colour is mixed to match
- What preparation is included
Repair or replace in Rushmoor?
People often assume a cracked or chipped bath has to come out. Normally it does not: a proper repair gives it years more use, without the cost and upheaval of replacing it. Our bath repair starts from £95. Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
Why us?
- Colour mixed on the day to match
- Accredited with CHAS, Constructionline and SafeContractor
- Repair technicians who travel to you, UK-wide
- One-year guarantee on every repair
Read our pricing or guide to resurfacing and replacement costs.
When a repair isn’t the answer
To be straight with you, there are a few things a repair will not fix:
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that moves underfoot, until its support is fixed
- Metal that has corroded all the way through
If in doubt, send pictures and we’ll say what we think.
Surfaces we repair
- Acrylic
- Whirlpool & spa baths
- Cast iron enamel
- Pressed steel enamel
- Roll-top & freestanding
Should I try a DIY kit first?
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
It’s tempting to reach for a kit, but the repairs we redo most frequently are DIY ones that have discoloured or lifted. Doing it properly first is normally the cheaper route.
About our accreditations · Every repair comes with a one-year guarantee.
