Blackburn with Darwen · England
Bath Repair in Cherry Tree
Damaged bath in Cherry Tree? We repair it in place, match it on site and guarantee the work for a year.
- Repairs from £95
- Impact holes in acrylic
- Chips along the edge of the bath
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. It does add a little time, so tell us about it when you send photos.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, it’s worth having it done properly.
About our bath repair in Cherry Tree
Most of our bath repairs take a few hours, and the bath is back in use the following day. There’s no need to book a plumber or tiler, because nothing is disconnected. Our repair technicians work on pressed steel enamel, cast iron enamel and roll-top & freestanding, and people most often call us about chips on the rim or sides and damage beneath the taps.
Big or small, it’s backed by a one-year guarantee in Cherry Tree and across Blackburn with Darwen.
- Where
- Cherry Tree (BB2)
- County
- Blackburn with Darwen
- Cover
- One year on every repair
- Quote
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. Chips can rust if left, but the bath itself lasts for generations, which makes it well worth repairing.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Covering Cherry Tree
Cherry Tree is about 2 miles south-west of Blackburn, in Blackburn with Darwen. Our work suits any type of property, old or new, large or small, plus businesses and rented homes. Our repair technicians cover all 42 towns and villages across Blackburn with Darwen, from the larger towns to small villages. Our jobs stretch from Cherry Tree to Manchester (about 22 miles away).
We cover every part of BB2. That includes homes on Tower Road, Green Lane and Willis Road and the roads around them. Being close to the A674 and A6062, Cherry Tree is simple for us to get to. We also cover the places around Cherry Tree: Feniscliffe (1 mile north), Mill Hill (1 mile north-east), Witton (1 mile north-east), Feniscowles (1 mile south-west) and Pleasington (1 mile west). Larger places within reach include Darwen (3 miles south-east), Bastwell (3 miles north-east), Bank Hey (3 miles north-east), Little Harwood (3 miles north-east), Rishton (5 miles north-east) and Shadsworth (3 miles east).
Local landmarks in Cherry Tree
In Cherry Tree, that means homes near Corporation Park, Livesey Saint Francis' Church of England School and St Wilfrid's Church of England Academy and the streets around them. Other local landmarks include St Francis (less than half a mile north-east) and St Bede's Roman Catholic High School (under half a mile south). Cherry Tree has its own railway station: Cherry Tree station. Further afield, we also cover the area around The Mall Blackburn (1.8 miles north-east) and Blackburn Royal Infirmary (1.2 miles east).
Common problems we fix in Cherry Tree
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until the acrylic gives way.
Typical reasons for a call-out include:
- Snagging damage from a refit
- A cracked acrylic bath
- Damage beneath the taps
- Scuffs and scratches in the surface
Comparing quotes
- Whether a trained technician does the job
- What happens if they find more damage
- If travel is included in the price
- Aftercare advice
What bath repair costs
Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:
- Whether old repairs or coatings need taking off
- Access to the area
- How many areas need work
- What the surface is made of
The price reflects the work involved, not your postcode. The full price is agreed before you book.
How to get a fixed price
We price nearly every job from pictures. This is what to send:
- A close-up of the damage, in focus
- Any details about the material
- A picture taken from further back
- Your postcode, so we can check dates
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can price the job.
Keeping it looking good
Looking after the surface is easy:
- Clean with warm water and a mild detergent
- Give the bath a quick rinse after use
- Store metal items away from the bath
- Have new chips seen to early
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Avoid scourers and gritty cream cleaners.
A chip on a metal bath shouldn’t be left. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Landlords, agents and businesses in Cherry Tree
Letting agents often send us photos straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Builders, developers and site managers book us for snagging repairs, putting right damage done during fitting. We are CHAS, Constructionline and SafeContractor accredited.
What happens on the day
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the work takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, typically the following day.
Preparing for the visit
- Keep a parking space free if you can
- Have a window or extractor fan available
- Tell us about any previous repairs or coatings
Get a quote
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say straight away if a repair is the right fix.
Related advice
Also near Cherry Tree
Also in Cherry Tree
What we cannot put right
A repair isn’t right for every job, for example:
- Rust that has eaten right through a steel bath
- A bath worn all over, where resurfacing makes more sense
- Cracks in parts of an acrylic bath we cannot get to from below
Send us pictures and we’ll tell you honestly before booking.
What we work on
- Pressed steel enamel
- Acrylic
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Questions from Cherry Tree
Can you quote from pictures?
In nearly every case. If pictures do not show enough, we’ll ask for another angle.
Is it OK to have pets in the house?
Please keep children and pets out of the room during the visit and until it has cured. Everywhere else in the home is fine.
Which areas do you work in?
Everywhere in the UK, Cherry Tree included. There is no extra charge for travel.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Is there a call-out fee?
No. Our quotes include travel, and we charge the same wherever you are.
Will the repair show?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including older coloured suites.
Can I add another job to the visit?
Of course, and it normally saves money. Just add the extra items to your photos and we will quote them together.
About our accreditations · Every repair comes with a one-year guarantee.
