Telford and Wrekin · England
Bath chip & crack repair in Chetwynd Aston, Telford and Wrekin
Chip and crack repairs to enamel, acrylic and cast iron baths in Chetwynd Aston, carried out at your home and guaranteed for a year.
- Repairs from £95
- Damage done while the bathroom was being fitted
- Scratches you can feel with a fingernail
When to call us in Chetwynd Aston
Acrylic baths that crack nearly always have a support problem. Loose legs, no proper cradle or a floor that gives let the bath move until it cracks.
People generally call us when they notice one of these:
- Chips under the taps
- Impact holes in acrylic
- Hairline or through cracks in acrylic
- A kit repair that didn’t last
What to look for in a quote
- Aftercare advice
- Whether cleaning and preparation are in the price
- How long the guarantee is and what it covers
- A fixed quote, and whether VAT is included
Bath repair in Chetwynd Aston, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on whirlpool & spa baths, roll-top & freestanding and pressed steel enamel, and people most often call us about holes from dropped items and rusty patches near the plughole.
A one-year guarantee comes with the work, just as it does everywhere we cover.
- Location
- Chetwynd Aston (TF10)
- Region
- Telford and Wrekin
- Warranty
- A year, on every repair
- Quote
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
Nearby places to Chetwynd Aston
What else we do in Chetwynd Aston
How to look after the repair
So the finish stays in good condition:
- Stick to mild cleaners and a soft cloth
- Keep metal cans and razors off the surface
- Rinse the bath after use, especially in hard water areas
- A dripping tap stains enamel, so fix it early
There’s nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams.
A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
You can buy a DIY kit for most repairs, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s what we repair.
Chetwynd Aston and the surrounding area
Chetwynd Aston is about 1 mile south of Newport, in Telford and Wrekin. Jobs in Chetwynd Aston are booked in like any other job: a fixed price from your pictures, then a visit to do the work. We cover 79 places across Telford and Wrekin. Our nearest city page is Birmingham, about 28 miles away.
All of TF10 is within our area, from the main roads to the quietest streets. Neighbouring places we cover include Pave Lane (1 mile south-east), Church Aston (1 mile north-west), Newport (1 mile north), Lilleshall (2 miles south-west) and Lilyhurst (2 miles south). We also work in nearby towns such as Telford (6 miles south-west), Wellington (7 miles south-west), Dawley (7 miles south-west), Oakengates (5 miles south-west), The Rock (7 miles south-west) and Newdale (7 miles south-west).
Around Chetwynd Aston
Around Chetwynd Aston, we work in homes near Newport Girls' High School, Church of St. Andrew and Church Aston Infant School, among other places. Further afield, we also cover the area around Aqualate Castle (1.7 miles north-east) and Lilleshall (2.1 miles south-west). Open spaces near Chetwynd Aston include Aqualate Mere.
FAQs for Chetwynd Aston
Will the repair show?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath.
Do you charge for travel?
Travel is included in the price, with the same prices everywhere we work.
Can I add another job to the visit?
Of course, and it typically saves money. Send pictures of everything together and you will get one combined price.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
Can you repair something that is been repaired before?
Yes, regularly. Removing the old work can add time, and that is in the quote.
What happens next?
We check the damage, the material and your postcode, then reply with a quote.
Can a cracked acrylic bath be fixed?
In most cases. We reinforce the crack from behind, then fill and refinish the front, so access behind the panel is important.
For landlords and businesses
For developers and builders, we fix damage before handover. Several plots can be done in one visit to keep costs down.
If you manage property in Chetwynd Aston, we can repair and quote for several addresses together. Just send photos for each address and we’ll price them together.
What we do, step by step
Arrival times are agreed in advance, so you’re not left guessing. On site, it takes a morning or an afternoon. We leave the room clean and you’ll know when it can be used.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Open a window if you can
- Tell us about parking, stairs or access
- Keep children and pets away from the room on the day
How to get a price
Most customers in Chetwynd Aston get their price from pictures. Add a line about what happened and your postcode, and we will reply with a fixed quote and the earliest dates we have.
Read more
Honest limits
Honesty matters more than a booking, so here’s what a repair won’t do:
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Cracks in parts of an acrylic bath we can’t get to from below
- Metal that has corroded all the way through
Not sure? Send photos and we will give you a straight answer.
Surfaces we repair
- Pressed steel enamel
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Roll-top & freestanding
How we price bath repair
Prices start from £95. We charge the same across the UK, including Chetwynd Aston. The price reflects:
- Doing more than one item at once
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
- What the surface is made of
The price depends on how much damage there is and what kind, the material and how many jobs we combine into one visit. You get a fixed price from your pictures, so there are no surprises on the day.
Quotes from your pictures
You can take the pictures on your phone, there is no need for anything special. Just ensure we can see:
- A coin beside the damage so we can judge size
- What it’s made of, if you know
- A wider photo showing the entire bath
- A clear, close picture of the problem area
Upload a photo of the damage and a wider shot of the whole item, and tell us you’re in Chetwynd Aston, and we’ll come back with a fixed quote.
About our accreditations · Every repair comes with a one-year guarantee.
