Telford and Wrekin · England
Bath Repair in Church Aston
We travel to Church Aston for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Damage done while the bathroom was being fitted
- A cracked acrylic bath
Bath repair in Church Aston without replacing anything
Whatever has happened to the bath, we aim for the same result: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it’s level with the surrounding surface. If you’re dealing with a hole punched through by something heavy and cracks in an acrylic bath, we can typically put it right, on cast iron enamel, pressed steel enamel and whirlpool & spa baths alike.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we’ve gone.
- Location
- Church Aston (TF10)
- Area hub
- Telford and Wrekin
- Cover
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Looking after it afterwards
Nothing complicated is needed:
- Give the bath a quick rinse after use
- Don’t leave razors or cans standing in the bath
- Stick to mild cleaners and a soft cloth
- Put a towel in the bath if you’re working above it
Treat the repaired area like the rest of the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
If an acrylic bath has a crack, stop showering in it until it’s repaired. Every use opens the crack a little more, and it can start to leak underneath.
DIY repairs versus a professional job
What a professional repair adds is preparation, colour matching and finishing. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, then guarantee it for a year.
Kits are cheap and easy to find, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is normally cheaper.
Do you need bath repair in Church Aston?
Glass and heavy bottles cause more chips than anything else, closely followed by shower heads. Taps and wastes cause problems too: water collects there, so chips nearby rust quickly.
Typical reasons for a call-out include:
- Chips caused by builders
- Impact holes in acrylic
- Scratches you can feel with a fingernail
- A chip where the taps sit
Comparing quotes
- Whether they match the colour on site
- How soon you can use it again
- What preparation is included
- Who turns up on the day
Landlord and trade work in Church Aston
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
For developers and builders, we fix damage before handover, saving last-minute replacements. Several plots can be done in one visit.
Also near Church Aston
Also in Church Aston
Your questions about bath repair in Church Aston
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
How long does the repair take to cure?
Typically within a day, though it depends on what we have done.
Will you leave a mess?
Very little mess: we sheet and mask everything nearby, and we leave the room clean.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed price.
When can you do it?
That depends on our diary for your area. Send photos with your postcode and we’ll reply with the earliest dates.
Can landlords book you?
Yes, often. We quote for multiple addresses and fit around tenancy changeovers.
What areas do you cover?
All of Telford and Wrekin, and the rest of the UK. Travel is included in the price.
Something went through my bath. Can it be fixed?
Often, if there is access underneath. The hole is backed, filled and refinished to match.
What happens on the day
When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. Expect it to take a few hours, depending on the damage. We clean up when we’re done and tell you when it’s ready to use.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Clear the area around the damage
- Tell us about parking, stairs or access
- Let us know which floor the room is on
Get a quote
To get a price, send two or three pictures through our quote form or call us. We will tell you honestly whether it can be repaired.
Read more
What bath repair costs
Prices start from £95. Prices are worked out job by job, from your pictures. What matters most is:
- Previous DIY repairs that have to come out
- Access to the area
- How many items we do on one visit
- How hard the colour is to match
Set against the cost of replacement, repairing normally costs far less, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.
How to get a fixed quote
Two or three clear pictures are normally enough. Try to include:
- Any details about the material
- One picture of the whole bath
- A coin beside the damage so we can judge size
- Good light, ideally daylight, without flash glare
Call 0345 017 0787 or use the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed quote the same day in most cases.
Repair or replace: which is better?
Cast iron baths especially are worth keeping: they’re very heavy to remove, especially upstairs, and replacing like for like isn’t cheap. A repair keeps it in place. Our bath repair starts from £95. Our prices are the same across the UK, with no extra for Church Aston. The job itself decides the price: the material, the amount of damage and how many items.
Why us?
- Colours mixed by hand to suit your surface
- Work done at your home or business
- A fixed quote before booking
- Honest advice, even when it means no job
See our full price list and resurfacing vs replacement cost guide.
When a repair is not the answer
We will always be straight with you, so here’s what a repair can’t fix:
- Acrylic cracks with no access behind them
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaks from the waste or overflow fittings (a plumber’s job)
Not sure? Send photos and we’ll give you a straight answer.
Materials we work on in Church Aston
- Acrylic
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Our work in Church Aston
Church Aston is about 1 mile south-west of Newport, in Telford and Wrekin. Our work suits any type of property, from flats and terraces to detached houses and new builds, plus businesses and rented homes. We work in 79 places in Telford and Wrekin. Our jobs stretch from Church Aston to Birmingham (29 miles away).
Jobs in TF10 are booked in the same way as anywhere else. We regularly work on streets such as Moorfield Lane, Wellington Road and Brookside Avenue. Other places close to Church Aston include Newport (1 mile north-east), Chetwynd Aston (1 mile south-east), Pave Lane (1 mile south-east), Lilleshall (1 mile south) and Forton (2 miles north). Further out, we also cover Telford (6 miles south-west), Wellington (7 miles south-west), Dawley (7 miles south-west), Oakengates (5 miles south-west), The Rock (6 miles south-west) and Newdale (6 miles south-west).
Near you in Church Aston
In Church Aston, that means homes near Newport Girls' High School, The Railway Tavern and Church Aston Infant School. A little further out are Aqualate Castle (2 miles north-east) and Lilleshall (2.2 miles south). The countryside around Church Aston includes Aqualate Mere.
About our accreditations · Every repair comes with a one-year guarantee.
