Kent · England

Bath Repair in Chilham

Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Chilham and across Kent. Free, fixed quotes from your pictures.

  • Repairs from £95
  • Damage beneath the taps
  • Rusty patches near the plughole
Surface Doctor technician refinishing the outside of a roll-top bath

Trusted bath repair in Chilham

How we handle bath repair in Chilham

Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. Typical jobs include snagging damage from a refit and chips under the taps, across whirlpool & spa baths, cast iron enamel and roll-top & freestanding.

All our work is covered by a one-year guarantee.

Area
Chilham (CT4)
Area hub
Kent
Cover
A year, on every repair
Quote
From £95. Free and fixed, from your pictures
Telephone
0345 017 0787
Page updated
23 October 2026
Bath enamel chip by the waste, filled and colour matched (before and after)

Landlords, agents and businesses in Chilham

We work for landlords, letting agents and housing providers in Chilham as well as homeowners. Repairing between tenancies keeps void periods short, and it typically costs far less than a refit.

Hospitality businesses can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.

Looking after it afterwards

Nothing complicated is needed, just a few sensible habits:

  • Check that an acrylic bath doesn’t move when you stand in it
  • Do not scrub with anything abrasive
  • A dripping tap stains enamel, so fix it early
  • Rinse it down after each bath

A repaired bath needs no special treatment, just sensible cleaning. Skip bleach and gritty creams and give it a rinse after each bath.

Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, and a rust spot is a bigger repair than a clean chip.

Why repair rather than replace?

Cast iron baths especially are worth keeping: getting one out, particularly from an upstairs bathroom, is a big job, and replacing like for like is not cheap. Repairing it leaves it where it is. Repairs from £95, with every job priced individually. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.

Why us?

  • A fixed quote before you book
  • Same prices wherever you are
  • One-year guarantee on every repair
  • Straight answers about what a repair can do

Take a look at our pricing and resurfacing vs replacement cost guide.

What a repair can’t fix

Before you book, it’s worth knowing the limits too:

  • Leaking fittings, which need a plumber
  • Rust that has eaten right through a steel bath
  • A whole bath that is dull or worn, where a full re-enamel is the better fix

Not sure? Send photos and we will give you a straight answer.

Materials we repair

  • Roll-top & freestanding
  • Whirlpool & spa baths
  • Cast iron enamel
  • Acrylic
  • Pressed steel enamel

How we price bath repair

Repairs from £95. You will know the full cost before you book. We take into account:

  • The type of damage
  • Whether old repairs or coatings need taking off
  • How many items we do on one visit
  • How hard the colour is to match

A repair typically costs much less than people expect, especially compared with replacing and refitting. Photos let us give you the exact figure.

Quotes from your photos

Two or three clear photos are usually enough. Try to include:

  • Any details about the material
  • One picture of the entire bath
  • A clear, close picture of the problem area
  • The postcode, so we can plan the visit

Getting a price is easy: snap the damage close up and then the whole item, send them to us with your postcode, and you will get a fixed price back. Quotes are free and no obligation.

The process

You do not need to empty the room beforehand. We bring everything we need with us, lay protective sheets and get going once we’ve agreed what we are doing. Most jobs take two to three hours for most chips, and you can get on with other things while we are there.

  1. We protect the bath and the floor around it.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the following day.

Before we arrive

  • Point us to the nearest place to park
  • Avoid using the area for a few hours before we arrive
  • Keep children and pets away from the room on the day

Getting a price

Most customers in Chilham get their price from photos. Add a line about what happened and your postcode, and we will send back a fixed quote and some dates.

Send photos for a quote

Advice

Your questions about bath repair in Chilham

Can you repair a failed DIY repair?

Yes. We take out the old repair and do it properly. Mention it when you send pictures.

I’m a tenant. Can you help?

Yes. Check with your landlord; we can send the quote to them too.

Is there a guarantee?

All our work carries our one-year guarantee. Ask us what it covers when you get your quote.

How much does bath repair cost in Chilham?

Repairs from £95. The exact price depends on the damage, so we quote from pictures. You will get a fixed figure before booking.

Can rust on a bath be repaired?

Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.

What happens next?

We come back with a fixed quote, usually with dates to choose from. There is no obligation to book.

Is a cracked acrylic bath repairable?

Most of the time. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.

It’s been repaired before. Can you still fix it?

Yes, we frequently do. Removing the old work can add time, and that is in the quote.

About Chilham

Chilham is about 5 miles south-west of Canterbury, in Kent. From the centre of Chilham to the outlying streets, the service is the same: fixed prices, tidy work and a one-year guarantee. Chilham is one of 922 towns and villages in Kent we cover. Our jobs stretch from Chilham to London (49 miles away).

Every address in CT4 is within our area, from the main roads to the quietest streets. That includes homes on The Street, The Square and Bagham Road and the roads around them. Nearby, we also work in Mountain Street (1 mile south-west), Old Wives Lees (1 mile north), Godmersham (2 miles south), Shottenden (2 miles west) and Perrywood (2 miles north-west). Further out, we also cover Ashford (8 miles south-west), Canterbury (5 miles north-east), Sittingbourne (12 miles north-west), Folkestone (14 miles south-east), Whitstable (8 miles north) and Faversham (6 miles north-west).

Around Chilham

Around Chilham, we work in homes near Broadham Down, Chilham and Church of St Mary. There’s a railway station in Chilham itself: Chilham station. Other landmarks nearby include Kent and Canterbury Hospital (5.3 miles east) and Chilham Castle (less than half a mile west). For a walk, there is Blean Woods RSPB Reserve.

Map of Chilham © OpenStreetMap contributors

What your bath is made of matters

Pressed steel

Under the enamel of a steel bath is thin metal. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Can I fix it myself?

The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.

If you do try a kit, read the instructions carefully and work on a clean, dry surface, and don’t use it until it has fully cured. If it doesn’t work out, we can still repair it properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.