Shropshire · England
Bath chip & crack repair in Chipnall, Shropshire
Bath repair across Chipnall and nearby, typically in one visit.
- Repairs from £95
- Rust spots around the plughole
- Damage beneath the taps
How we price bath repair
Prices start from £95. We charge the same across the UK, including Chipnall. What changes the price is:
- What the surface is made of
- How easy the damage is to reach
- Whether it’s a chip, crack, burn or wear
- Unusual colours or finishes
It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you will get a fixed figure.
Getting a price from photos
When you take your photos, a few simple things make all the difference:
- Any details about the material
- Any earlier repairs or coatings
- Natural light rather than flash
- Something in shot to show the size
Ring 0345 017 0787, or send us pictures through the quote form. With a clear picture of the damage and one of the entire bath, we can give you a fixed price without visiting.
How we handle bath repair in Chipnall
We repair enamelled steel, cast iron and acrylic baths. The method changes with the material: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We regularly repair pressed steel enamel, cast iron enamel and whirlpool & spa baths, and the jobs we see most are a chipped rim or side and an old repair that has yellowed or come loose.
The work is covered for a year after we finish. If anything is not right, ring us and we’ll come back.
- Location
- Chipnall (TF9)
- County
- Shropshire
- Cover
- 12 months on all our work
- Quotes
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Repairs by material
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Honest limits
A repair isn’t always the answer, and we will tell you before we start. We cannot fix:
- Rust that has eaten right through a steel bath
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- A bath worn all over, where resurfacing makes more sense
Send us pictures and we’ll tell you honestly.
What we work on
- Whirlpool & spa baths
- Pressed steel enamel
- Roll-top & freestanding
- Cast iron enamel
- Acrylic
Nearby places to Chipnall
Other services in Chipnall
Our work in Chipnall
Chipnall is about 4 miles south-east of Market Drayton, in Shropshire. Anywhere in TF9, we carry out the work at your property. Chipnall is one of 433 towns and villages in Shropshire where we work. We work right across the region, from Chipnall to Birmingham (about 36 miles away).
We cover every part of the TF9 postcode area. Other places close to Chipnall include Cheswardine (1 mile south), Soudley (1 mile south), Woodlane (3 miles south-west), Mill Green (3 miles south-west) and High Heath (3 miles south-west). Larger places within reach include Market Drayton (4 miles north-west), Whitchurch (13 miles north-west), Shifnal (15 miles south), Wem (13 miles west), Loggerheads (3 miles north) and Shawbury (12 miles south-west).
Around Chipnall
Around Chipnall, we work in homes near Cheswardine Primary and Nursery School and Church of St Swithun, among other places. Nearby you will also find Market Drayton Museum And Resource Centre (3.5 miles north-west) and Cheswardine Castle (0.8 miles south-west). Open spaces near Chipnall include Cop Mere and Quarry Wood.
When to call us in Chipnall
Heavy toiletries are the biggest single cause of chips. Fittings cause damage too: water sits around them, and any chip there soon rusts.
Signs it’s time to call us include:
- Holes from dropped items
- Rust by the waste and overflow
- Cracks in an acrylic bath
- Chips along the edge of the bath
Comparing quotes
- What protection goes down before work starts
- How long the guarantee is and what it covers
- When it can be used again
- Who turns up on the day
Landlord and trade work in Chipnall
We regularly work with letting and managing agents. Send the address, pictures and access details and we’ll handle the rest.
We also carry out snagging repairs for builders and developers, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Common questions in Chipnall
Can you quote from photos?
In nearly every case. We only ask to see it in person if the photos cannot show what we need.
Will the repair last?
It should, as long as the bath is firm and the area was prepared well. It carries our one-year guarantee.
Will the repair show?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can pets and children be at home?
On the day, the room should be kept clear of pets and children.
Do you come to Chipnall?
Yes. We cover the whole UK and come to Chipnall and the rest of Shropshire. Send pictures and we’ll quote, or call 0345 017 0787.
What happens if you find more damage?
We stop, show you and agree any change before carrying on. Nothing extra is done without your say-so.
How do I get a price for bath repair in Chipnall?
Repairs from £95. Because every job differs, we price from pictures. You know the full cost before anything is booked.
Do you charge for travel?
No. Our quotes include travel, and we charge the same wherever you are.
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and doing several things on one visit costs less than separate visits.
Why book with us
- Most jobs done in one visit
- No extra charge for your area
- No need to remove anything
- Colour mixed on the day to match
Take a look at our full price list and resurfacing vs replacement cost guide.
Looking after it afterwards
Looking after the surface is easy:
- Don’t leave razors or cans standing in the bath
- Have new chips seen to early
- Rinse the bath after use, especially in hard water areas
- Put a towel in the bath if you are working above it
There’s nothing special to do after a repair, beyond gentle cleaning. Skip bleach and gritty creams and rinse after use.
Tape over a fresh chip or crack until it’s repaired, to keep water out. Remove it before the repair.
What we do, step by step
We turn up at the time we agreed with you, introduces themselves and looks over the damage before anything else. The floor and nearby surfaces are covered before we open a single tin. The work itself takes a morning or an afternoon, and we leave the room as we found it.
- First, we check the damage against your pictures and agree the plan.
- Any rust and loose material comes out, and the area is degreased.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Let the surface dry out before the visit
- Tell us about any previous repairs or coatings
- Have a window or extractor fan available
How to get a price
You don’t need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.
Advice
About our accreditations · Every repair comes with a one-year guarantee.
