Shropshire · England
Bath chip & crack repair in Mill Green, Shropshire
We travel to Mill Green for chip and crack repairs to enamel, acrylic and cast iron baths. Everything is done in place, and the work is guaranteed.
- Repairs from £95
- Holes from dropped items
- Cracks in an acrylic bath
Repair or replace in Mill Green?
People frequently assume a cracked or chipped bath has to come out. In most cases it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Set against the cost of replacement, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you are paying for.
Why book with us
- Rooms protected and left tidy
- Everything repaired in place
- Normally one visit, start to finish
- Honest advice, even when it means no job
See our full price list and resurfacing vs replacement cost guide.
How we handle bath repair in Mill Green
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath. You can usually use the bath the day after. Our technicians work on acrylic, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are hairline or through cracks in acrylic and chips on the rim or sides.
You’re covered after we leave: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Location
- Mill Green (TF9)
- County
- Shropshire
- Guarantee
- One year on every repair
- Quotes
- From £95. Fixed and free, based on pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Signs you need bath repair in Mill Green
Rust normally starts where water sits, around the waste, under the taps or in an old chip. Water on bare metal causes rust that creeps under the surrounding enamel.
People usually call us when they notice one of these:
- Holes from dropped items
- A kit repair that didn’t last
- A chip where the taps sit
- A chipped rim or side
Questions to ask before you book
- A fixed quote, and whether VAT is included
- How soon you can use it again
- How long the guarantee is and what it covers
- If travel is included in the price
Repairs by material
Composite and resin
Composite baths are dense and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. Chips can rust if left, but the bath itself lasts for generations, so it’s always worth repairing.
What we do, step by step
We agree an arrival time beforehand, so you are not left guessing. Once we’re there, the work takes two to three hours for most chips. We leave the room clean.
- We protect the bath and the floor around it.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, generally the next day.
How to prepare
- Let us know which floor the room is on
- Let the surface dry out before the visit
- Point us to the nearest place to park
How to get a price
There is no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll reply with a fixed price.
Advice
Prices and what affects them
Repairs from £95. You will not pay by the hour. The price depends on:
- How many areas need work
- How many items we do on one visit
- Any earlier repairs that need removing first
- The type of damage
A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
How to get a fixed price
You can typically get a fixed quote without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- Natural light rather than flash
- Your postcode, so we can check dates
- Any details about the material
Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and no obligation.
Common questions in Mill Green
Is there a guarantee?
Yes, for a year. If anything goes wrong with the repair within the year, we return to fix it.
Do you come to Mill Green?
Yes. We work across the UK and travel to Mill Green and the rest of Shropshire. Send us photos for a fixed quote, or call 0345 017 0787.
Will I be able to see the repair?
The goal is a repair that blends in. How well it disappears depends on the condition of the rest of the bath, and we’ll tell you what to expect.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps.
Can pets and children be at home?
We ask you to keep children and pets out of the room while we work. Everywhere else in the home is fine.
Can you repair a hole in a bath?
In most cases. Send us a photo of the hole and one from under the bath if you can.
What happens next?
We check the damage, the material and your postcode, then reply with a quote with dates.
Do the materials smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Our work in Mill Green
Mill Green is about 4 miles south of Market Drayton, in Shropshire. We work in every kind of home, old or new, large or small, as well as offices, shops and holiday lets. We work in 433 places in Shropshire, from the larger towns to small villages. We work right across the region, from Mill Green to Birmingham (36 miles away).
Our repair technicians cover all of TF9 and the streets around it. If you’re just outside Mill Green, we cover High Heath (1 mile south-east), Woodlane (1 mile south-east), Hinstock (1 mile south-east), Child's Ercall (2 miles south-west) and Sutton upon Tern (2 miles north). Larger places within reach include Shrewsbury (15 miles south-west), Madeley (15 miles south), Market Drayton (4 miles north), Coleham (15 miles south-west), Kingsland (15 miles south-west) and Whitchurch (12 miles north-west).
Landmarks near Mill Green
We visit homes around Wistanwick United Reformed Church and Hinstock Primary School. Further afield, we also cover the area around Cheswardine Castle (2.6 miles north-east) and Market Drayton Museum And Resource Centre (3.8 miles north). For a walk, there’s Quarry Wood.
DIY repairs versus a professional job
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
A kit can be fine for a tiny mark out of sight. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, a professional repair is worth it.
Honest limits
We’d rather lose a job than do one that will not last, so here’s what a repair cannot put right:
- Water coming from the waste or taps rather than the bath
- Metal that has corroded all the way through
- A bath worn all over, where resurfacing makes more sense
Send us photos and we will tell you honestly.
Surfaces we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
Places near Mill Green
Also in Mill Green
Looking after it afterwards
How the surface is treated afterwards matters:
- Get a dripping tap fixed promptly
- Avoid scourers, wire wool and gritty cream cleaners
- Do not leave razors or cans standing in the bath
- Don’t leave a fresh chip for long
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so it pays to deal with it early.
About our accreditations · Every repair comes with a one-year guarantee.
