Devon · England
Bath chip & crack repair in Churchill, Devon
Bath repair in and around Churchill: photo quotes, tidy work and a year’s guarantee.
- Repairs from £95
- A failed DIY repair that is discoloured or lifting
- Rust by the waste and overflow
About our bath repair in Churchill
We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: rust is treated on metal baths, while cracks in acrylic are reinforced from underneath. We work on pressed steel enamel, roll-top & freestanding and cast iron enamel, and the jobs we see most are rusty patches near the plughole and an old repair that has yellowed or come loose.
We stand behind the work with a one-year guarantee, so you are covered after the visit.
- Area
- Churchill (EX13)
- Area hub
- Devon
- Warranty
- 12 months on all our work
- Price
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
When to call us in Churchill
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Customers usually contact us about:
- Rusty patches near the plughole
- Scuffs and scratches in the surface
- An old repair that has yellowed or come loose
- Chips along the edge of the bath
Comparing quotes
- Aftercare advice
- What the guarantee covers, and for how long
- Whether the price covers travel
- How the room is protected while they work
Covering Churchill
Churchill is about 5 miles south of Chard, in Devon. Book a date that suits you, and you’ll know when to expect us, so you’re not left waiting in all day. Churchill is one of 586 towns and villages in Devon where we work.
We work across EX13. Other places close to Churchill include Smallridge (1 mile south-east), All Saints (1 mile east), Weycroft (1 mile south-east), Axminster (2 miles south) and Tytherleigh (2 miles north-east). We also work in nearby towns such as Sidmouth (13 miles south-west), Honiton (8 miles west), Seaton (8 miles south-west), Ottery St Mary (13 miles west), Colyton (6 miles south-west) and Sidford (12 miles south-west).
Landmarks near Churchill
In Churchill, that means homes near Church of All Saints, Ridgeway Inn and Axe Valley Academy and the streets around them. The nearest railway station is Axminster station, roughly 2.1 miles south. Well-known places in the area include Stockland Little Castle (4.3 miles west) and Axminster Hospital (1.7 miles south). For a walk, there’s Lambert's Castle Hill.
Different materials, different repairs
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, just like other baths.
Places near Churchill
Other services in Churchill
When we’d advise against a repair
To be straight with you, there are a few things a repair won’t fix:
- Flexing caused by a failed cradle or loose feet
- Cracks in acrylic we cannot reach from underneath
- Leaking fittings, which need a plumber
Send us photos and we will tell you honestly.
Surfaces we repair
- Whirlpool & spa baths
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Cast iron enamel
How the visit works
Nothing needs to be moved out of the room beforehand. We bring everything we need with us, lay protective sheets and start once you’re happy with the plan. Most jobs take a morning or an afternoon, and you can get on with other things while we are there.
- We start by cleaning the damage and taking out loose enamel and rust.
- The chip or crack is filled, then sanded level with the bath.
- The colour is mixed on the spot to match your bath.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the next day, the bath is ready to use.
Before we arrive
- Keep a parking space free if you can
- Tell us about any previous repairs or coatings
- Keep children and pets away from the room on the day
Getting a price
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Read more
Should I try a DIY kit first?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and the old filler has to come out before a proper repair.
How we price bath repair
Prices start from £95. Prices are worked out job by job, from your photos. What matters most is:
- How hard the colour is to match
- Whether old repairs or coatings need taking off
- How many areas need work
- Access to the area
Instead of hourly rates, we fix the price before we start. Damage, material and access decide it, and combining items on one visit brings it down.
How to get a fixed quote
We price nearly every job from pictures. This is what to send:
- Something in shot to show the size
- A clear, close picture of the problem area
- Where you are, by postcode
- A wider photo showing the whole bath
Email us a picture of the damage and one of the whole item, with your EX13 postcode, and we will reply with a fixed price.
Repair or replace in Churchill?
Think about the hidden costs of a new bath: removal and disposal, plumbing, a new panel, tiling and decorating. A repair is one job, done in one visit. Prices start from £95. No two jobs are quite the same, so each one is priced on its own. The size and type of damage, the material and access all play a part, and doing several things on one visit costs less than separate visits.
What you get with us
- One-year guarantee on every repair
- We come to you, anywhere in the UK
- Nothing taken out or refitted
- Typically one visit, start to finish
See our full price list or guide to resurfacing and replacement costs.
Work for landlords and builders
Builders use us to fix snagging damage before handover. We can visit several plots in one trip to keep costs down.
Rental properties take more wear, and replacing things at every changeover adds up. Repairing between tenants keeps the property presentable for less.
Questions from Churchill
Do you do work for letting agents?
Yes. We work for landlords, agents, builders and businesses as well as householders in Churchill.
Can I get a quote without a visit?
Nearly always. If photos do not show enough, we’ll ask for another angle.
Is my repair covered?
Every repair comes with a one-year guarantee. We’ll explain what it covers when we quote.
What areas do you cover?
The whole UK, including all of Devon. Just include your postcode and we will offer you dates.
Can you repair a crack in an acrylic bath?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
Will the price change on the day?
It’s rare, but if it happens we talk to you first. The price only changes if you agree.
Can you redo an old repair?
Yes. We remove the old filler and start again. Mention it when you send photos.
Does someone need to be in?
We need someone to let us in. You do not need to watch us work.
About our accreditations · Every repair comes with a one-year guarantee.
