Bradford · England

Bath chip & crack repair in Clayton, Bradford

Fixed-price bath repair in Clayton and the surrounding area, done in a single visit in most cases and guaranteed for a year.

  • Repairs from £95
  • A hole punched through by something heavy
  • Hairline or through cracks in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair near Clayton

When a repair isn’t the answer

Before booking, it’s worth knowing the limits too:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • A bath that moves underfoot, until its support is fixed
  • Metal that has corroded all the way through

Not sure? Send photos and we will give you a straight answer.

Materials we work on in Clayton

  • Acrylic
  • Roll-top & freestanding
  • Pressed steel enamel
  • Whirlpool & spa baths
  • Cast iron enamel

Bath repair at your home in Clayton

Small damage on a bath is worth repairing early. On steel and cast iron, exposed metal starts to rust, while cracks in acrylic grow each time the bath moves. Repairing it stops the damage getting worse. Typical jobs include scuffs and scratches in the surface and a cracked acrylic bath, on roll-top & freestanding, acrylic and cast iron enamel.

Whatever the size of the job, it’s backed by a one-year guarantee.

Location
Clayton (BD14, BD7, BD13)
County
Bradford
Cover
A year, on every repair
Quote
From £95. Fixed and free, based on photos
Phone
0345 017 0787
Updated
23 October 2026
Rusty chip next to a bath plughole, before and after repair

Common questions in Clayton

Are you accredited?

We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.

Do you repair coloured baths?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Do you work for landlords and businesses?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

How much does bath repair cost in Clayton?

Prices start from £95. Every job gets a fixed quote based on pictures of the damage. Send a close-up and a picture of the whole item and your postcode.

Can rust on a bath be repaired?

Yes, it’s one of the most common repairs we do. The rust is cut back to clean metal and sealed before we fill and finish it.

Something went through my bath. Can it be fixed?

In most cases. Send us a photo of the hole and one from under the bath if you can.

Can you redo an old repair?

Yes, we do this frequently. We strip it out, deal with any rust and repair it again.

Is it messy?

Very little mess: we sheet and mask everything nearby, and we leave the room clean.

Should you replace it?

A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Our bath repair starts from £95. It helps to know what pushes a price up or down: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Send pictures and you’ll get a fixed figure.

Why us?

  • No extra charge for your area
  • We come to you, anywhere in the UK
  • CHAS and Constructionline accredited
  • Colours mixed by hand to suit your surface

See our prices page and resurfacing vs replacement cost guide.

What bath repair costs

Prices start from £95. You won’t pay by the hour. The price is based on:

  • Unusual colours or finishes
  • Whether it’s a chip, crack, burn or wear
  • How many areas need work
  • Previous DIY repairs that have to come out

The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed price from your pictures, so there are no surprises on the day.

How to get a fixed price

The better the pictures, the more accurate the price. Here’s what helps:

  • Details of any past repairs
  • Your postcode, so we can check dates
  • A coin or ruler next to the damage for scale
  • One picture of the whole bath

Getting a quote takes a couple of minutes: take one close-up and one wider shot of the bath, add your postcode and send them over. What comes back is a fixed quote, not a guess.

Looking after it afterwards

It’s all simple stuff:

  • Don’t leave a fresh chip for long
  • Keep metal cans and razors off the surface
  • If an acrylic bath flexes, have its feet adjusted
  • Rinse it down after each bath

Keep metal objects like razors and cans off the surface, because they can mark the enamel. And fix dripping taps promptly.

Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.

Covering Clayton

Clayton is about 2 miles west of Bradford, in Bradford. Across the BD14 area, we carry out the work at your property. Clayton is one of 140 towns and villages in Bradford where we work. You can also see our page for Leeds, about 11 miles away.

Our technicians cover all of BD14, BD7 and BD13 and the streets around it. Whether you live on Back Lane, Middle Lane and Brecks Road or a nearby road, we can come to you. Close by, we cover Clayton Heights (1 mile south-west), Old Dolphin (1 mile south-west), West Scholes (2 miles west), Thornton (2 miles north-west) and Queensbury (2 miles south-west). Further out, we also cover Keighley (7 miles north-west), Bingley (5 miles north), Shipley (4 miles north-east), Baildon (5 miles north-east), Ilkley (10 miles north) and Manningham (3 miles north-east).

Near you in Clayton

Locally, our jobs take us to homes close to The Quarry Arms Public House, Church of St John the Baptist and Buttershaw Business and Enterprise College. Nearby too are Clayton Village Primary School (under half a mile west) and Beckfoot Thornton (0.7 miles north-west). The closest station to Clayton is Bradford Forster Square station, about 2.7 miles north-east of the centre. Well-known places in the area include Thornton View hospital (within half a mile south) and Colour Experience (2.4 miles north-east). The countryside around Clayton includes Heaton Reservoir Nature Reserve and Idle Hill.

Map of Clayton © OpenStreetMap contributors

How the visit works

The work is clean and fairly quiet. Protection goes down first, then the job itself takes a few hours, depending on the damage. Before we leave, we explain the curing time and the aftercare.

  1. First, the area is cleaned and any loose enamel or rust is removed.
  2. The chip or crack is filled, then sanded level with the bath.
  3. The colour is mixed on the spot to match your bath.
  4. Finish coats go on, then the repair is polished to blend in.
  5. Once it has cured, generally by the next day, the bath is ready to use.

Preparing for the visit

  • Keep pets and children out of the room while we work
  • Mention if the room is upstairs or in a flat
  • Clear the area around the damage

Get a quote

There’s no need for us to visit first. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we will reply with a fixed quote.

Get a fixed quote

Related advice

What we’re called out for in Clayton

A cracked acrylic bath generally wasn’t supported properly. Legs that are not adjusted, a missing cradle or a soft floor let the bath move.

Most people get in touch when they notice one of these:

  • Scuffs and scratches in the surface
  • A chipped rim or side
  • A cracked acrylic bath
  • Chips caused by builders

What to look for in a quote

  • Whether the price covers travel
  • How long the guarantee is and what it covers
  • How your room will be protected
  • A fixed quote, and whether VAT is included

10 questions to ask before booking

For landlords and businesses

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.

Landlords, letting agents and housing providers in Clayton use us as well as homeowners. A repair between tenants keeps the property empty for less time, and it costs much less than replacing.

DIY kit or professional repair?

If you do try a kit, read the instructions carefully, make sure the area is clean and completely dry, and do not use it until it has fully cured. If it fails, we can still put it right.

For a hairline mark somewhere you will never see, a kit may be enough. For anything you look at every day, anything that has rusted, cracked or holed, or anything on a coloured surface, it’s worth having it done properly.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.