Kirklees · England
Bath chip & crack repair in Clough Head, Kirklees
Bath repair for Clough Head, without a refit. Send us photos for a fixed price, then we come to you.
- Repairs from £95
- An old repair that has yellowed or come loose
- Scuffs and scratches in the surface
Bath repair at your home in Clough Head
We have repaired just about every kind of bath damage: chips from dropped bottles, rust round the plughole, cracks in acrylic and holes from falling tools. Each is repaired in place with a one-year guarantee. If you’re dealing with damage beneath the taps and a kit repair that didn’t last, we can normally put it right, on pressed steel enamel, acrylic and roll-top & freestanding alike.
A one-year guarantee comes as standard, so you are covered after the visit.
- Area
- Clough Head (HD7)
- Area hub
- Kirklees
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Common questions in Clough Head
How much does bath repair cost in Clough Head?
Prices start from £95. The exact price depends on the damage, so we quote from photos. You know the full cost before anything is booked.
Is there a guarantee?
Every repair comes with a one-year guarantee. We will explain what it covers when we quote.
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
Is a cracked acrylic bath repairable?
In most cases. The back of the crack is strengthened before the front is filled and refinished, so we need access under the bath.
How long before I can use the bath?
Normally by the following day, though it depends on what we’ve done.
Will I be able to see the repair?
On a bath in good condition, a colour matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Can pets and children be at home?
Just keep them out of the work area. We’ll let you know when it’s safe to use again.
How do I book?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
Places near Clough Head
Other services in Clough Head
Where we work around Clough Head
Clough Head is about 3 miles west of Huddersfield, in Kirklees. We visit clients in Clough Head and the surrounding area, so there is no workshop to go to. We cover all 189 towns and villages across Kirklees, from the larger towns to small villages. Our jobs stretch from Clough Head to Manchester (about 18 miles away).
Here we cover the HD7 postcode area. Whether you live on Slaithwaite Gate and Bolstermoor Road or a nearby road, we can come to you. Neighbouring places we cover include Bolster Moor (1 mile south-east), Causeway Foot (1 mile west), Scapegoat Hill (1 mile north-east), Nettleton Hill (1 mile north-east) and Lower Wellhouse (1 mile south-east). Further out, we also cover Huddersfield (3 miles east), Dewsbury (11 miles east), Batley (11 miles north-east), Mirfield (8 miles east), Liversedge (9 miles north-east) and Cleckheaton (9 miles north-east).
Near you in Clough Head
Locally, our jobs take us to homes close to Clough Head Junior and Infant School, Colne Valley High School and Golcar Lily pub and the streets around them. The nearest railway station is Slaithwaite station, roughly 1.1 miles south of the centre. A little further out are Piazza Centre (4 miles east) and Huddersfield Royal Infirmary (2.7 miles north-east). Green spaces nearby include Moorside Edge.
Honest limits
We will not take on work that will not last, so these are the limits:
- Metal that has corroded all the way through
- Leaks from the waste or overflow fittings (a plumber’s job)
- A bath worn all over, where resurfacing makes more sense
Not sure? Send photos and we will give you a straight answer before booking.
Materials we repair
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
- Acrylic
- Pressed steel enamel
What affects the price in Clough Head
Repairs from £95. Quotes are free and the price is fixed. What we take into account:
- Previous DIY repairs that have to come out
- The material
- The colour and finish to match
- Whether it’s a chip, crack, burn or wear
A repair is priced on what needs doing, not where you live. The full price is agreed before you book.
Quotes from your pictures
A couple of clear pictures is all it takes. Try to include:
- Good light, ideally daylight, without flash glare
- A clear, close picture of the problem area
- Any earlier repairs or coatings
- A coin beside the damage so we can judge size
You do not need a survey visit. Photos are enough for us to price nearly every job: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
DIY repairs versus a professional job
You can buy a DIY kit for most repairs, and they can make a small mark look better. The trouble is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
We understand the appeal of fixing it yourself. The trouble is that kit repairs often look fine at first and then fail, and then the old filler has to be removed first.
Looking after it afterwards
Nothing complicated is needed, just a few sensible habits:
- Put a towel in the bath if you are working above it
- Ensure an acrylic bath is firm underfoot
- Rinse it down after each bath
- Keep abrasive pads and gritty cleaners away from the bath
Leave the repair to cure for as long as we say before running a bath. After that, gentle cleaning keeps it looking good.
Until we visit, a strip of waterproof tape over the damage helps, to keep water out. Take it off before we arrive.
Repair or replace: which is better?
For damage in one or two places, a repair is the obvious choice. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Repairs from £95, with every job priced individually. Compared with replacing, a repair is typically a fraction of the price, because nothing has to be taken out, refitted or made good. Your fixed quote shows exactly what’s included.
Why book with us
- Rooms protected and left tidy
- Free fixed quotes from pictures
- Work done at your home or business
- Colours mixed by hand to suit your surface
Take a look at our pricing and resurfacing vs replacement cost guide.
The process
On the day, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. The job usually takes a morning or an afternoon. We tidy up before we leave and let you know when you can use it again.
- We start by looking at the damage and confirming the plan with you.
- Any rust and loose material comes out, and the area is degreased.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
How to prepare
- Have somewhere for us to park nearby if possible
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or call us. We’ll tell you honestly whether it can be repaired.
Advice
Materials and what they mean for the repair
Pressed steel
Under the enamel of a steel bath is thin metal. Exposed steel rusts quickly, so the metal is treated and sealed before the repair.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. The enamel is the part that wears or chips, and that’s the part we put right.
For landlords and businesses
Housing associations and facilities teams use us for planned and reactive repairs in Kirklees and across the UK. Repairing in place avoids the disruption of a replacement, which matters when someone is living in the home.
Hospitality businesses need rooms back in use quickly, so we keep visits short and tidy. We can work around your bookings.
About our accreditations · Every repair comes with a one-year guarantee.
