Blaenau Gwent · Wales
Bath Repair for Coalbrookvale homes
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Coalbrookvale, with a one-year guarantee on every repair.
- Repairs from £95
- Chips caused by builders
- Deep scratches in acrylic
Bath repair in Coalbrookvale without replacing anything
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. Proper preparation, careful filling and shaping, then colour and gloss matching so it’s level with the surrounding surface. If you are dealing with cracks in an acrylic bath and impact holes in acrylic, we can help.
Every repair is covered by our one-year guarantee, wherever you are in Blaenau Gwent.
- Area
- Coalbrookvale (NP23, NP13)
- Area hub
- Blaenau Gwent
- Warranty
- One year on every repair
- Quotes
- From £95. Free, fixed price from pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
Repair or replace: which is better?
If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we’ll tell you. Repairs from £95, with every job priced individually. Most people are surprised how affordable a repair is, especially compared with replacing and refitting. Photos let us give you the exact figure.
Why choose Surface Doctor in Coalbrookvale
- We leave the room as we found it
- Honest advice, even when it means no job
- One-year guarantee on every repair
- Colour-matched on site
Take a look at our prices page and guide to resurfacing and replacement costs.
Other services in Coalbrookvale
Can I fix it myself?
What a professional repair adds is preparation, colour matching and finishing. We prepare the area properly, mix the colour on site and polish the finish to match, then guarantee it for a year.
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Exposed steel rusts quickly, so we treat and seal the metal before filling.
What happens on the day
There’s not much you need to do on the day. Show us the job, point us to the room, and we will get on with it. The job generally runs to a few hours, including clearing up.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased, and any rust is treated.
- Filler goes in and is sanded flush once it has set.
- We match both the colour and the shine.
- We tidy up and tell you when the bath can be used, generally the next day.
Preparing for the visit
- Have a window or extractor fan available
- Let us know about parking or access
- Ensure the area is dry
How to get a price
There’s no need for us to visit first. Nearly every job can be priced from photos: send a close-up, a wider shot and your postcode, and we’ll come back to you with a fixed figure.
Advice
What a repair cannot fix
Before booking, it’s worth knowing the limits too:
- Acrylic cracks with no access behind them
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
If in doubt, send pictures and we will say what we think before you book.
Surfaces we repair
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
How we price bath repair
Prices start from £95. We give every job a fixed quote from photos. This is what makes a difference:
- Previous DIY repairs that have to come out
- The material and finish
- The type of damage
- How easy the damage is to reach
Every job is a little different, so we price each one individually. What’s damaged, how badly and how easy it is to reach all make a difference, and combining jobs on one visit brings the cost down.
Getting a price from photos
It only takes a minute to photograph the damage. Try to send:
- One picture of the whole bath
- Good light, ideally daylight, without flash glare
- A close-up of the damage, in focus
- The material, if you know it
Most clients in Coalbrookvale get their price from pictures. Add a line about what happened and your postcode, and we’ll reply with a fixed quote and the earliest dates we have.
What we are called out for in Coalbrookvale
Rust typically starts where water sits, around the waste, under the taps or in an old chip. Once water reaches the steel or iron, rust spreads under the enamel.
The most common problems we’re called about are:
- Damage beneath the taps
- Scuffs and scratches in the surface
- Chips caused by builders
- A kit repair that didn’t last
What to look for in a quote
- Whether there are any call-out or travel charges
- How to look after the finish
- How the room is protected while they work
- When it can be used again
Common questions in Coalbrookvale
Can you repair a failed DIY repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Can a cracked acrylic bath be fixed?
Frequently, yes, as long as we can get to the back of the crack to support it. Take off the bath panel and check, or send us a picture.
Is a holed acrylic bath repairable?
Usually, yes, if we can reach behind it. The hole is backed, filled and refinished to match.
Can you repair something that’s been repaired before?
Generally, yes. Let us know what was used before.
Are you accredited?
We hold CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile accreditations.
Do the materials smell?
Expect a mild smell while we are working that clears as it cures.
Does someone need to be in?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can I get a quote without a visit?
Nearly always. We only ask to see it in person if the pictures cannot show what we need.
Landlord and trade work in Coalbrookvale
For anyone letting property in or around Coalbrookvale, we can repair and quote for several addresses together. Send photos for each one and we’ll come back with a combined price.
Rental properties take more wear, and replacing things at every changeover adds up. A repair between tenancies is a cheaper way to keep the property in good order.
Where we work around Coalbrookvale
Coalbrookvale is about 2 miles south-east of Ebbw Vale, in Blaenau Gwent. We travel to customers in Coalbrookvale, so you don’t need to take anything anywhere. Coalbrookvale is one of 56 towns and villages in Blaenau Gwent where we work. You can also see our page for Birmingham, about 73 miles away.
Our technicians cover all of the NP23 and NP13 postcode area and the streets around it. We also cover the places around Coalbrookvale: Coedcae (1 mile north-east), Nantyglo (1 mile north), Y Blaenau (1 mile south-east), Cwmcelyn (1 mile east) and Tŷ-llwyn (1 mile west). We also work in nearby towns such as Tredegar (3 miles west), Abertillery (3 miles south-east), Rassau (3 miles north-west), Blaenau Gwent (3 miles south-east), Penrhiwgarreg (4 miles south-east) and Pen-y-bont (3 miles south-east).
Local landmarks in Coalbrookvale
In Coalbrookvale, that means homes near Market Hall Cinema, Glyncoed Comprehensive School and Coed -y- Garn Primary School, among other places. You’ll also find Blaina Inn (0.5 miles north-east), St Peter's Church (0.8 miles south-east) and St Peter's Church (0.8 miles south-east). The closest station to Coalbrookvale is Ebbw Vale Town station, roughly 1.2 miles west. Further afield, we also cover the area around Blaina & District Hospital (0.7 miles north-east) and Castell Taliorum (4.7 miles south-east). Open spaces near Coalbrookvale include Mynydd Carn-y-cefn and Cwmcelyn Lake.
About our accreditations · Every repair comes with a one-year guarantee.
