Gateshead · England
Bath chip & crack repair in Coalburns, Gateshead
We travel to Coalburns for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, with a one-year guarantee.
- Repairs from £95
- Deep scratches in acrylic
- Cracks in an acrylic bath
Landlord and trade work in Coalburns
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
Letting agents frequently send us pictures straight from the inventory. That means we can quote before you even visit the property, and we liaise with tenants about access if you’d like us to.
Bath repair in Coalburns without replacing anything
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There’s no plumbing to disconnect, your tiles stay as they are, and the finish is matched to the rest of the bath. We work on roll-top & freestanding, acrylic and cast iron enamel, and common reasons people contact us are rust spots around the plughole and snagging damage from a refit.
Every repair is covered by a one-year guarantee, wherever you are in Gateshead.
- Where
- Coalburns (NE40)
- County
- Gateshead
- Cover
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
How to care for the repair
After the repair has cured, a few habits help it last:
- Fix dripping taps early to stop staining and limescale
- Rinse the bath after use, especially in hard water areas
- Don’t scrub with anything abrasive
- Cover the bath during DIY or decorating
Don’t leave razors, cans or hair grips in the bath, as they can leave rust marks. A dripping tap should be fixed early, too.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.
Covering Coalburns
Coalburns is about 3 miles west of Blaydon, in Gateshead. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Our repair technicians cover all 49 towns and villages in Gateshead. Our nearest city page is Newcastle upon Tyne, about 7 miles away.
Postcode districts we cover here: NE40. Nearby, we also work in Chopwell (2 miles south), Prudhoe (2 miles north-west), Hagg Bank (2 miles north-west), Wylam (2 miles north) and Blackhall Mill (3 miles south). We also work in nearby towns such as Gateshead (8 miles east), Blaydon (3 miles east), Dunston (6 miles east), Whickham (5 miles east), Ryton (3 miles north-east) and Winlaton (3 miles east).
Near you in Coalburns
Around Coalburns, we work in homes near Greenside Primary School and Hookergate School and the streets around them. Coalburns’s nearest station is Wylam station, roughly 2.2 miles north. Well-known places in the area include Prudhoe Castle (2.7 miles north-west) and Prudhoe Urban District (2.2 miles north-west). Green spaces nearby include Addison and Hedgefield Woods and Currock Hill.
Should I try a DIY kit first?
The difference between a kit and a professional repair is mostly in the preparation and colour. We prepare the area properly, mix the colour on site and polish the finish to match, and the work is guaranteed.
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Getting it right first time is usually cheaper.
Nearby places to Coalburns
More services for Coalburns
Signs you need bath repair in Coalburns
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Common reasons people in Coalburns contact us include:
- Cracks in an acrylic bath
- Holes from dropped items
- Snagging damage from a refit
- Chips along the edge of the bath
What your quote should include
- When it can be used again
- Whether the colour is mixed to match
- Who will actually do the work
- If travel is included in the price
What a repair can’t fix
We’ll always be straight with you, so here’s what a repair won’t do:
- Water coming from the waste or taps rather than the bath
- A whole bath that is dull or worn, where a full re-enamel is the better fix
- Flexing caused by a failed cradle or loose feet
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Coalburns
- Acrylic
- Roll-top & freestanding
- Whirlpool & spa baths
- Pressed steel enamel
- Cast iron enamel
How we price bath repair
Repairs from £95. We give every job a fixed price from pictures. These are the things that affect it:
- Any earlier repairs that need removing first
- Whether it’s a chip, crack, burn or wear
- Whether we combine several jobs
- What the surface is made of
Instead of hourly rates, we fix the price before we start. It depends on the damage, the material and access, and combining items on one visit brings it down.
Send pictures for a quote
The better the pictures, the more accurate the price. Here’s what helps:
- A wider photo showing the entire bath
- Good light, ideally daylight, without flash glare
- Any details about the material
- Something in shot to show the size
A quote takes minutes to ask for: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed quote, not a guess.
What happens on the day
Here’s how a visit typically runs: we arrive on time, protect everything around the work area, do the job and tidy away. Plan for a few hours from start to finish. Before leaving, we tell you when it can be used and how to look after it.
- First, the area is cleaned and any loose enamel or rust is removed.
- Next we fill the damage and sand it smooth and level.
- The colour is mixed on the spot to match your bath.
- We apply the finish coats and polish the repair so it blends in.
- The repair is left to cure, and most baths can be used the day after.
Getting ready for the visit
- Tell us if there are stairs or a lift
- Let us know about parking or access
- Ensure the room can be ventilated
How to get a price
Upload photos of the damage and a wider shot of the whole item, with your NE40 postcode, and we’ll reply with a fixed price.
Read more
Coalburns questions
What about rust by the waste?
Yes. We take out the rust and any loose enamel, seal and fill the area, then colour-match the finish.
Is a bath repair durable?
Yes, if it’s prepared properly and the bath is sound. It carries our one-year guarantee.
Will I be able to see the repair?
The goal is a repair that blends in. The rest of the bath’s condition makes a difference, and we will tell you what to expect.
Can you repair something that is been repaired before?
Generally, yes. Let us know what was used before and we will plan for it.
What do you need from me?
Just pictures, your postcode and a contact number. On the day, we only need access to the room.
What if the damage is worse than the photos show?
Your quote covers the damage in the photos. Anything extra is discussed before we begin.
Do the materials smell?
Expect a mild smell while we’re working that clears as it cures.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Different materials, different repairs
Composite and resin
Composite baths are dense and solid, and often freestanding. Chips and scratches can be filled and colour matched, just like other baths.
Acrylic
Acrylic is light and warm to the touch, but it relies on good support. Repairs to cracks are reinforced from the back.
About our accreditations · Every repair comes with a one-year guarantee.
