West Sussex · England
Bath chip & crack repair in Coates, West Sussex
Chip and crack repairs to enamel, acrylic and cast iron baths for homeowners, landlords and businesses in Coates. Free, fixed quotes from your pictures.
- Repairs from £95
- Rust by the waste and overflow
- A kit repair that didn’t last
What your bath is made of matters
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, in much the same way.
Cast iron
Cast iron baths are thick and very strong, with a fused enamel surface. A chip down to the iron can rust, but the body of the bath lasts a very long time, so it’s always worth repairing.
How we handle bath repair in Coates
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the day after. Common call-outs are for damage done while the bathroom was being fitted and chips on the rim or sides, across pressed steel enamel, cast iron enamel and whirlpool & spa baths.
Peace of mind is built in: our one-year guarantee applies to every job, and we will explain exactly what it covers when we quote.
- Area
- Coates (RH20)
- Region
- West Sussex
- Guarantee
- One year on every repair
- Quote
- From £95. Fixed and free, based on pictures
- Call
- 0345 017 0787
- Updated
- 23 October 2026
What a repair cannot fix
We’d rather lose a job than do one that will not last, so these are the limits:
- Rust that has eaten right through a steel bath
- A bath that moves underfoot, until its support is fixed
- Leaks from the waste or overflow fittings (a plumber’s job)
Send us photos and we will tell you honestly before you book.
What we work on
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
Keeping it looking good
How the surface is treated afterwards matters:
- Keep metal cans and razors off the surface
- Get any new chip repaired before it rusts
- Check that an acrylic bath does not move when you stand in it
- Keep abrasive pads and gritty cleaners away from the bath
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and rinse after use.
Do not leave a chip on a steel or cast iron bath. Once water reaches the metal, rust begins, turning a quick repair into a bigger one.
Nearby places to Coates
More services for Coates
For landlords and businesses
If you manage property in Coates, we will quote for several properties at once. Send pictures for each one and we will price them together.
We also carry out snagging repairs for builders and developers, putting right damage done during fitting so nothing needs replacing. We are CHAS, Constructionline and SafeContractor accredited.
Our work in Coates
Coates is about 10 miles north of Littlehampton, in West Sussex. Wherever you are in the RH20 postcode area, a technician comes to you. Our repair technicians cover all 371 towns and villages in West Sussex. Our nearest city page is London, about 43 miles away.
We work across RH20. Other places close to Coates include Lower Horncroft (1 mile east), Fittleworth (1 mile north-east), Bedham (1 mile north-east), Watersfield (2 miles south-east) and Coldwaltham (2 miles south-east). We also work in nearby towns such as Horsham (14 miles north-east), Worthing (12 miles south-east), Bognor Regis (12 miles south-west), Chichester (12 miles south-west), Littlehampton (10 miles south) and Lancing (14 miles south-east).
What’s near Coates
Typical jobs here are in homes near Fittleworth CofE Village School, The Swan Hotel and Church of St Agatha and the streets around them. The closest station to Coates is Pulborough station, about 2.7 miles east of the centre. Further afield, we also cover the area around Coates Castle (0.5 miles south-west) and Coultershaw Heritage Site (2 miles north-west). Green spaces nearby include Bignor Hill and Amberley Wild Brooks.
Should I try a DIY kit first?
It’s tempting to reach for a kit, but many of the jobs we do start with putting right a DIY repair. Doing it properly first is typically the cheaper route.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
When to call us in Coates
Baths take more knocks than people expect: everyday items get dropped into it all the time, and taps and wastes are tightened against the surface. Sooner or later, most baths pick up a chip.
Typical reasons for a call-out include:
- Rust by the waste and overflow
- Damage done while the bathroom was being fitted
- Impact holes in acrylic
- Scuffs and scratches in the surface
Comparing quotes
- Whether the price covers travel
- Who will actually do the work
- How the colour is matched
- A fixed price, and whether VAT is included
What we do, step by step
Expect a friendly, tidy visit. We agree the arrival time in advance, protect the area, then carry out the work, which usually takes a few hours. If we find something your pictures didn’t show, we’ll explain it before carrying on.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage.
- Filler goes in and is sanded flush once it has set.
- Colour and gloss are matched to the surrounding surface.
- We tidy up and tell you when the bath can be used, usually the day after.
How to prepare
- Plan for the room to be out of bounds to pets and children
- Open a window if you can
- Tell us about parking, stairs or access
Get a quote
The quickest way to a price is to send a couple of photos through our quote form or call us. We will say straight away if a repair is the right fix.
Advice
FAQs for Coates
Will there be a smell?
A little, depending on the job. Ventilation keeps it to a minimum, and it soon fades.
Can you do more than one item on the same visit?
Yes. Doing several items on one visit generally costs less than separate visits. Send pictures of everything you’d like done.
Can you repair a hole in a bath?
Typically. Photos of the hole and the underside help us check.
Is it messy?
Dust sheets and masking go down before we start, and tidy up before we leave.
I tried a repair kit. Can you fix it?
Regularly. We strip it out, deal with any rust and repair it again.
Is it worth repairing rather than replacing?
Generally, yes. A repair skips the removal, fitting and redecorating. We’ll be honest if it’s not worth it.
What information do you need?
Use the quote form or ring 0345 017 0787.
When can you do it?
We’ll give you dates with your quote. If it’s urgent, say so and we’ll do what we can.
Should you replace it?
A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it’s done in one visit, and the bathroom stays exactly as it is. Prices start from £95. A few things move the price: the amount of damage, the material, access to the area, and how many jobs we do in one trip. Photos let us give you a fixed figure.
Why us?
- Fixed prices from your photos
- One price list for the whole UK
- Work done at your home or business
- Colours mixed by hand to suit your surface
Take a look at our prices page and guide to resurfacing and replacement costs.
About our accreditations · Every repair comes with a one-year guarantee.
