West Sussex · England

Bath chip & crack repair in Coldwaltham, West Sussex

Our technicians come to Coldwaltham for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.

  • Repairs from £95
  • Scuffs and scratches in the surface
  • A cracked acrylic bath
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Coldwaltham

For landlords and businesses

Hotels, guest houses and holiday lets need rooms back in use quickly, so we keep visits short and tidy. We’ll fit around changeovers where we can.

Rented homes see more wear and tear, and replacing items every time a tenant leaves is expensive. A repair between tenancies is a cheaper way to keep the property in good order.

Bath repair in Coldwaltham without replacing anything

Bath repair is our most common job. A chip by the taps, a crack in the base and a rust spot by the plughole are all fixed without removing the bath, usually in a single visit. We regularly repair cast iron enamel, whirlpool & spa baths and pressed steel enamel, and common reasons people get in touch are rust spots around the plughole and snagging damage from a refit.

A one-year guarantee comes with the work, just as it does everywhere we cover.

Location
Coldwaltham (RH20)
County
West Sussex
Cover
A year, on every repair
Quotes
From £95. Free, fixed quote from pictures
Telephone
0345 017 0787
Last updated
23 October 2026
Before and after: a damaged acrylic bath corner repaired in place

About Coldwaltham

Coldwaltham is about 9 miles north of Littlehampton, in West Sussex. Jobs in Coldwaltham are booked in like any other job: a fixed quote from your photos, and a technician at your door on the day. Coldwaltham is one of 371 places in West Sussex we cover. You can also see our page for London, about 43 miles away.

Every address in RH20 is within our area. From London Road, Old London Road and Silverdale or anywhere nearby, a technician can come to you. Other places close to Coldwaltham include Watersfield (1 mile south-west), Hardham (1 mile north-east), Lower Horncroft (1 mile north-west), Coates (2 miles north-west) and Fittleworth (2 miles north-west). Within a short drive, we also cover Horsham (13 miles north-east), Worthing (10 miles south-east), Bognor Regis (12 miles south-west), Chichester (12 miles south-west), Littlehampton (9 miles south) and Shoreham-by-Sea (14 miles south-east).

What’s near Coldwaltham

Around Coldwaltham, we work in homes near The Parish Church of St Giles, Lodge Hill Residential Centre and The Labouring Man pub and the streets around them. Coldwaltham’s nearest station is Pulborough station, about 1.8 miles north-east. Other landmarks nearby include Amberley Museum (2.8 miles south) and Amberley Castle (2 miles south). Green spaces nearby include Amberley Wildbrooks RSPB Reserve and Bignor Hill.

Map of Coldwaltham © OpenStreetMap contributors

Can I fix it myself?

DIY kits are sold for most surfaces, and they can make a small mark look better. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.

If you are set on a kit, follow its instructions closely, and give it the full curing time. If it fails, we can still put it right.

Aftercare tips

Most damage we see is avoidable. A few tips:

  • Avoid scourers, wire wool and gritty cream cleaners
  • A dripping tap stains enamel, so fix it early
  • Give the bath a quick rinse after use
  • Ensure an acrylic bath is firm underfoot

A repaired bath needs no special treatment, just sensible cleaning. Avoid bleach-based and gritty cleaners and give it a rinse after each bath.

Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.

What affects the price in Coldwaltham

Repairs from £95. You will not pay by the hour. The price depends on:

  • Whether we combine several jobs
  • Where the damage is and how we get to it
  • Whether it’s a chip, crack, burn or wear
  • Unusual colours or finishes

We do not add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

Two or three clear photos are generally enough. It helps if you send:

  • A coin or ruler next to the damage for scale
  • Good light, ideally daylight, without flash glare
  • One picture of the whole bath
  • Details of any past repairs

Email us pictures of the damage and a wider shot of the whole item, and tell us you are in Coldwaltham, and we’ll come back with a fixed quote.

How the visit works

When we visit, the technician arrives at the agreed time, protects the room with dust sheets and masking and gets started. The job generally takes a few hours. We clean up when we’re done and let you know when you can use it again.

  1. Dust sheets and masking go down around the bath.
  2. The damaged area is cleaned, keyed and degreased.
  3. Filler goes in and is sanded flush once it has set.
  4. Colour and gloss are matched to the surrounding surface.
  5. We tidy up and tell you when the bath can be used, normally the day after.

Preparing for the visit

  • Mention any earlier repairs or resurfacing
  • Make sure the room can be ventilated
  • Make sure the area is dry

How to get a price

Call 0345 017 0787 or use the quote form. With one close-up and one wider picture, we can price the job the same day in most cases.

Get a free quote

Read more

Repair or replace in Coldwaltham?

If the rest of the bath is in good condition, a repair is almost always the better choice. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. The price depends on the type and amount of damage, the material and how many items we do on one visit. We give a fixed price from your photos, so you know the cost before booking.

Why choose Surface Doctor in Coldwaltham

  • Typically one visit, start to finish
  • Nothing taken out or refitted
  • CHAS and Constructionline accredited
  • We leave the room as we found it

Read our pricing and guide to resurfacing and replacement costs.

What we cannot put right

Before you book, it’s worth knowing the limits:

  • Cracks in parts of an acrylic bath we can’t get to from below
  • A bath worn all over, where resurfacing makes more sense
  • Rust that has eaten right through a steel bath

Not sure? Send pictures and we’ll give you a straight answer before booking.

What we work on

  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic
  • Whirlpool & spa baths

FAQs for Coldwaltham

How invisible is a bath repair?

We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath, and we will tell you what to expect.

How much does bath repair cost in Coldwaltham?

Repairs from £95. Every job gets a fixed price from your photos. Send a close-up and a photo of the entire item with your RH20 postcode.

Do you come to Coldwaltham?

Yes. We cover the whole UK and travel to Coldwaltham. Send photos and we’ll quote, or call 0345 017 0787.

Can you repair something that’s been repaired before?

In most cases. The old repair comes out first.

Can you match an avocado or pink bath?

Yes. We mix the colour on the day to match, including pastel and older colours.

Can pets and children be at home?

Just keep them out of the work area. We will let you know when it’s safe to use again.

What happens once I’ve sent pictures?

We review the photos and send a fixed quote.

Will the price change on the day?

We will show you and explain before doing anything extra. Nothing extra is done without your say-so.

Repairs by material

Composite and resin

Composite baths are dense and solid, and often freestanding. Chips and scratches are filled and matched, in much the same way.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, particularly by the plughole, so early repairs matter.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.