Staffordshire · England
Bath chip & crack repair in Codsall Wood, Staffordshire
Bath repair in Codsall Wood without the cost of replacing. Get a fixed price from your pictures, then we come to you.
- Repairs from £95
- Snagging damage from a refit
- Rusty patches near the plughole
Bath repair in Codsall Wood without replacing anything
We repair just the damaged spot and colour-match it to the bath, which is far cheaper than replacing a fitted bath and the tiles around it. You can usually use the bath the day after. Our technicians work on acrylic, whirlpool & spa baths and pressed steel enamel, and common reasons people get in touch are chips caused by builders and rusty patches near the plughole.
Every repair is covered by our one-year guarantee, wherever you are in Staffordshire.
- Where
- Codsall Wood (WV8)
- Area hub
- Staffordshire
- Cover
- One year on every repair
- Quote
- From £95. Free and fixed, from your pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
What your bath is made of matters
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Also near Codsall Wood
Also in Codsall Wood
What bath repair costs
Repairs from £95. We do not charge extra for travel to Codsall Wood. The price comes down to:
- How easy the damage is to reach
- Whether we combine several jobs
- The material
- How hard the colour is to match
There are no surprise extras on the day. The price we quote from your photos is the price you pay, unless the damage turns out to be different, in which case we talk to you first.
Quotes from your pictures
The better the photos, the more accurate the price. Here’s what we find most useful:
- Whether it’s been repaired or coated before
- A clear, close picture of the problem area
- Any details about the material
- The postcode, so we can plan the visit
If you’re in Codsall Wood and want a price, the easiest route is photos: one close up, one from further back, plus your postcode. You will get a fixed quote with dates to choose from.
Should you replace it?
Replacing a bath rarely stops at the bath: the tiles sitting on the rim tend to break, a new panel is frequently needed, and the plumbing has to be disconnected and refitted. Repairing the damage avoids all of that. Prices start from £95. The price depends on how much damage there is and what kind, what it’s made of and how many items we do on one visit. You get a fixed quote from your pictures, so you know the cost before booking.
Why Codsall Wood customers choose us
- CHAS and Constructionline accredited
- We leave the room as we found it
- Same prices wherever you are
- Free fixed quotes from pictures
See our prices page or resurfacing vs replacement cost guide.
How to look after the repair
Aftercare is simple:
- Rinse the bath after use, especially in hard water areas
- A dripping tap stains enamel, so fix it early
- Cover the bath during DIY or decorating
- Keep abrasive pads and gritty cleaners away from the bath
Give the repair the full curing time we recommend before using the bath. After that, gentle cleaning keeps it looking good.
Rust under enamel spreads surprisingly quickly. Left for months, a small chip can grow into a large rust patch, so early repair keeps the cost down.
Where we work around Codsall Wood
Codsall Wood is about 6 miles north-west of Wolverhampton, in Staffordshire. Our technicians come to clients in Codsall Wood, so you do not need to take anything anywhere. We cover 512 places across Staffordshire. Our nearest city page is Birmingham, about 18 miles away.
Our visits in WV8 are booked in the same way as anywhere else. That includes homes on Whitehouse Lane, Wood Road and Church Lane. Neighbouring places we cover include Kingswood (1 mile south-west), Oaken (2 miles south), Shackerley (2 miles west), Albrighton (2 miles west) and Boningale (2 miles south-west). Further out, we also cover Stafford (12 miles north), Cannock (10 miles north-east), Rugeley (14 miles north-east), Burntwood (13 miles east), Hednesford (11 miles north-east) and Wombourne (8 miles south).
Around Codsall Wood
Typical jobs here are in homes near The Cross Guns pub, St Peter and Codsall Community High School. The nearest railway station is Codsall station, roughly 1.5 miles south-east. A little further out are RAF Hospital Cosford (2.6 miles west) and Tong Castle (3.5 miles north-west).
Codsall Wood: your questions answered
Can rust on a bath be repaired?
Yes. We take out the rust and any loose enamel, fill the area, then colour-match the finish.
What areas do you cover?
We cover the whole UK, including Codsall Wood and the rest of Staffordshire. Send your postcode with your photos and we’ll offer you dates.
Will the repair show?
On a glossy bath, you’ll struggle to find it. On older, dull enamel the repair can look glossier than the area around it.
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send pictures.
I’m a tenant. Can you help?
Of course. Ask your landlord first, and we can send them the quote if that helps.
When can I have a bath again?
Typically the following day. We confirm the time before we leave.
Do I need to be at home?
Someone needs to let us in and show us the job. After that, you can carry on with your day.
Can you repair a crack in an acrylic bath?
Frequently, yes, if we can reach the underside to reinforce it. Check under the bath panel, or send us a photo.
What happens on the day
From the moment we arrive, the aim is to do the job without disturbing the rest of your home. We mask off everything nearby, the job takes a few hours, depending on the damage, and we finish by cleaning up and talking you through the result.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- The damage is filled in layers and shaped to the curve of the bath.
- The colour is tinted by hand until it matches.
- The repair is polished to the same gloss as the bath and left to cure.
Getting ready for the visit
- Plan for the room to be out of bounds to pets and children
- Tell us about parking, stairs or access
- Avoid using the area for a few hours before we arrive
Getting a price
There is no need for us to visit first. Nearly every job can be priced from photos: we need a close-up, a wider picture and your postcode, and we’ll reply with a fixed quote.
Advice
When we’d advise against a repair
A repair isn’t always the answer, and we will tell you before we start. Repairs will not solve:
- Acrylic cracks with no access behind them
- Wear across the entire surface, which needs re-enamelling
- A steel bath rusted through
Not sure? Send pictures and we will give you a straight answer.
What we work on
- Acrylic
- Pressed steel enamel
- Whirlpool & spa baths
- Roll-top & freestanding
- Cast iron enamel
Should I try a DIY kit first?
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler often lifts.
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For landlords and businesses
For developers and builders, we fix damage before handover. Several plots can be done in one visit.
Hospitality businesses cannot afford rooms out of action for long, so most of our work is done in a single visit. We will fit around changeovers where we can.
About our accreditations · Every repair comes with a one-year guarantee.
