Staffordshire · England
Bath Repair in Hednesford
Bath repair in Hednesford without the cost of replacing. Send us pictures for a fixed quote, then we come to you.
- Repairs from £95
- Scratches you can feel with a fingernail
- Chips along the edge of the bath
Work for landlords and builders
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We work for landlords, letting agents and housing providers in Hednesford as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Bath repair in Hednesford without replacing anything
A typical bath repair is a few hours’ work, and the bath is back in use the next day. There’s no need to book a plumber or tiler, because nothing is disconnected. Common call-outs are for cracks in an acrylic bath and rust spots around the plughole, in cast iron enamel, whirlpool & spa baths and acrylic.
We stand behind the work with a one-year guarantee, so you’re not left on your own once we have gone.
- Where
- Hednesford (WS12, WS11)
- County
- Staffordshire
- Guarantee
- 12 months on all our work
- Quotes
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Page updated
- 23 October 2026
Places near Hednesford
More services for Hednesford
Our work in Hednesford
Hednesford is about 1 mile north-east of Cannock, in Staffordshire. From the centre of Hednesford to the outlying streets, we offer exactly the same service: fixed prices, tidy work and a one-year guarantee. We work in 512 places across Staffordshire. Our nearest city page is Birmingham, about 17 miles away.
Our visits in WS12 and WS11 are booked in the same way as anywhere else. That includes homes on Gray Road, Belt Road and Wood Lane. Close by, we cover Pye Green (1 mile north-west), Chadsmoor (1 mile south-west), Brindley Heath (1 mile north), Huntington (2 miles west) and Bednall Head (4 miles north-west). We also work in nearby towns such as Stafford (8 miles north-west), Tamworth (15 miles south-east), Lichfield (8 miles east), Rugeley (4 miles north-east), Burntwood (4 miles south-east) and Stone (14 miles north-west).
What’s near Hednesford
In Hednesford, that means homes near The Queens Arms, Hednesford Park and Staffordshire University Academy, among other places. Nearby too are Kingsmead School (0.7 miles south), Our Lady of Lourdes Church (within half a mile south) and West Hill Primary School (under half a mile west). There is a railway station in Hednesford itself: Hednesford station. Further afield, we also cover the area around Cannock Castle Ring (2.7 miles east) and Cannock Chase Hospital (1.8 miles south-west). For a walk, there is George's Hayes.
Keeping it looking good
Much of the damage we repair could have been avoided. These habits help:
- If an acrylic bath flexes, have its feet adjusted
- Do not scrub with anything abrasive
- Fix dripping taps early to stop staining and limescale
- Use a soft cloth and washing-up liquid for everyday cleaning
Give the repair the full curing time we recommend before running a bath. From then on, mild cleaning is all it needs.
Avoid standing in a cracked acrylic bath until it’s fixed. Each time it flexes, the crack grows, and it can start to leak underneath.
Should I try a DIY kit first?
It’s natural to want to try a repair yourself. The trouble is that kit repairs often look fine at first and then fail, and the old filler has to come out before a proper repair.
If you’ve already tried a DIY fix, that is fine. We take the old repair out and do it properly, so it does not stop a professional repair. Just mention it when you send photos, as it can add time.
Hednesford questions
What happens if you find more damage?
If we find something the photos didn’t show, we explain it first. You decide whether to go ahead.
Do you work in Hednesford?
Yes, we do. Repair technicians travel to Hednesford from across the region, and the price is the same as everywhere else.
Can rust on a bath be repaired?
Yes, very often. The rust is cut back to clean metal and sealed before we fill and finish it.
Can I get a quote without a visit?
Yes, almost always. A close-up and a wider photo are enough to give a fixed quote.
Do you hold any accreditations?
Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
Will the repair show?
We aim for a repair you can’t easily find. How well it disappears depends on the condition of the rest of the bath.
Are there extra charges for Hednesford?
No. Our quotes include travel, and we charge the same wherever you are.
Which areas do you work in?
We work UK-wide, so Hednesford is covered. Prices do not change with location.
When to call us in Hednesford
Many chips happen while the bathroom is being fitted. Tools, tiles and fittings get dropped into the bath, and the damage is not always spotted until later. Snagging repairs like these are a regular job for us.
The most common problems we’re called about are:
- A chip where the taps sit
- Damage done while the bathroom was being fitted
- An old repair that has yellowed or come loose
- A chipped rim or side
What your quote should include
- A fixed price, and whether VAT is included
- How to look after the finish
- How soon you can use it again
- What preparation is included
When we’d advise against a repair
We would rather lose a job than do one that won’t last, so here’s what a repair cannot put right:
- Leaking fittings, which need a plumber
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
- Wear across the whole surface, which needs re-enamelling
If in doubt, send photos and we will say what we think.
Surfaces we repair
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
- Cast iron enamel
- Roll-top & freestanding
Materials and what they mean for the repair
Pressed steel
Pressed steel is thinner and lighter, with an enamel finish like cast iron. Chips rust quickly on steel, particularly by the plughole, so early repairs matter.
Acrylic
An acrylic bath is a moulded sheet strengthened from below. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
Repairing versus replacing in Hednesford
A repair makes sense whenever the damage is localised. It’s a fraction of the cost of a new bath and fitting, it takes one visit, and nothing else in the room changes. Prices start from £95. Our prices are the same across the UK, so there is no premium for Hednesford. The job itself decides the price: how much damage, what it’s made of and how many items.
What you get with us
- Colour mixed on the day to match
- We come to you, anywhere in the UK
- CHAS and Constructionline accredited
- Most jobs done in one visit
See our prices page or bath cost comparison.
The process
We work cleanly and quietly, so you can carry on at home. Protection goes down first, then the job itself takes two to three hours for most chips. At the end we talk you through the curing time and the aftercare.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, normally by the day after, the bath is ready to use.
Getting ready for the visit
- Tell us about parking, stairs or access
- Have somewhere for us to park nearby if possible
- Tell us if there are stairs or a lift
Getting a price
Getting a price is easy: snap the damage close up and then the entire item, send them to us with your postcode, and you’ll get a fixed price back. Quotes are free and no obligation.
Related advice
About our accreditations · Every repair comes with a one-year guarantee.
