Gwynedd · Wales

Bath Repair in Coed-mawr

Bath repair in and around Coed-mawr: a fixed quote from photos, a tidy visit and a one-year guarantee.

  • Repairs from £95
  • A kit repair that didn’t last
  • Snagging damage from a refit
Surface Doctor technician refinishing the outside of a roll-top bath

Book bath repair in Coed-mawr

About our bath repair in Coed-mawr

We repair enamelled steel, cast iron and acrylic baths. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We work on pressed steel enamel, cast iron enamel and acrylic, and the jobs we see most are a cracked acrylic bath and chips on the rim or sides.

We stand behind the work with a one-year guarantee, so you’re covered after the visit.

Location
Coed-mawr (LL57, LL59)
Area hub
Gwynedd
Cover
A year, on every repair
Price
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Updated
23 October 2026
Acrylic bath corner rebuilt by Surface Doctor, before and after

Repair or replace: which is better?

Cast iron baths in particular are worth repairing: they’re very heavy to remove, especially upstairs, and a like-for-like replacement can be expensive. A repair keeps it in place. Prices start from £95. Compared with replacing, a repair is generally a fraction of the price, because there is no removal, plumbing or making good. The quote lists exactly what you’re paying for.

What you get with us

  • Nothing taken out or refitted
  • Work done at your home or business
  • Dust sheets down, tidy finish
  • Every repair guaranteed for a year

Read our full price list and resurfacing vs replacement cost guide.

Repairs by material

Acrylic

Acrylic is light and warm to the touch, but it needs firm support underneath. Repairs to cracks are reinforced from the back.

Composite and resin

Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches are filled and matched, just like other baths.

Covering Coed-mawr

Coed-mawr is about 1 mile south-west of Bangor, in Gwynedd. Jobs in Coed-mawr are booked in like any other job: a fixed quote from your pictures, then a visit to do the work. We work in all 165 towns and villages in Gwynedd. Our jobs stretch from Coed-mawr to Liverpool (52 miles away).

Every address in LL57 and LL59 is within our area. Whether you live on Ainon Road, Belmont Road and Penrhos Avenue or anywhere nearby, we can come to you. Coed-mawr is on the A4087, so it’s easy for us to reach. Neighbouring places we cover include Bryn-llwyd (1 mile south-east), Glanadda (1 mile north-east), Minffordd (1 mile east), Bangor (1 mile north-east) and Penrhosgarnedd (1 mile south-west). Larger places within reach include Caernarfon (7 miles south-west), Bethesda (4 miles south-east), Gerlan (5 miles south-east), Braichmelyn (5 miles south-east), Llanbeblig (7 miles south-west) and Llanberis (7 miles south). Coed-mawr is one of the larger places we cover in Gwynedd.

What’s near Coed-mawr

We visit homes around St David's Church, Union Inn and Ysgol Friars and the streets around them. You’ll also find Ysgol Tryfan (less than half a mile north) and Alice Williams Memorial Library (1.1 miles north-east). The closest station to Coed-mawr is Bangor (Gwynedd) station, roughly 0.7 miles north-east. Well-known places in the area include Deiniol (1.1 miles north-east) and Pier Camp (1.5 miles north-east). The countryside around Coed-mawr includes Spinnies Nature Reserve and Llyn Celanedd.

Map of Coed-mawr © OpenStreetMap contributors

What a repair can’t fix

We will not take on work that will not last, so these are the limits:

  • Leaks from the waste or overflow fittings (a plumber’s job)
  • A bath that moves underfoot, until its support is fixed
  • Cracks in acrylic we cannot reach from underneath

Not sure? Send photos and we will give you a straight answer.

Surfaces we repair

  • Roll-top & freestanding
  • Pressed steel enamel
  • Cast iron enamel
  • Acrylic
  • Whirlpool & spa baths

Coed-mawr: your questions answered

What does bath repair cost?

Repairs from £95. Every job gets a fixed quote from your photos. Send a close-up of the damage and a wider photo and your postcode.

Will I be able to see the repair?

On a bath in good condition, a colour matched repair is very hard to spot. On older, dull enamel the repair can look glossier than the area around it.

Are you accredited?

Yes, including CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.

Can you quote from photos?

Typically, yes. A close-up and a wider photo are enough to give a fixed price.

Do you do work for letting agents?

Yes, often. We quote for multiple addresses and fit around tenancy changeovers.

Can you match an avocado or pink bath?

Yes, we match coloured baths too. We tint the finish to your bath on site.

Do you cover Coed-mawr?

We do. Repair technicians travel to Coed-mawr from across the region, with no extra charge for travel.

Is it safe with children and pets around?

Yes, as long as they stay out of the room we are working in. We will tell you when the room can be used again.

Keeping it looking good

Nothing complicated is needed, just a few sensible habits:

  • A dripping tap stains enamel, so fix it early
  • Stick to mild cleaners and a soft cloth
  • Rinse the bath after use, especially in hard water areas
  • Ensure an acrylic bath is firm underfoot

For the first few days, keep heavy bottles off the repaired spot. After that, clean it as you would the rest of the bath.

A chip on a metal bath shouldn’t be left. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.

What we’re called out for in Coed-mawr

Rust tends to begin where water collects, by the plughole, beneath dripping taps or in an unrepaired chip. Once water reaches the steel or iron, rust spreads under the enamel.

Keep an eye out for these signs:

  • Rusty patches near the plughole
  • Chips along the edge of the bath
  • A kit repair that didn’t last
  • Damage beneath the taps

Comparing quotes

  • Whether the colour is mixed to match
  • What aftercare is recommended
  • How long the guarantee is and what it covers
  • Whether the price covers travel

How to compare quotes

The process

From the moment we arrive, the aim is to do the job without disturbing the rest of your home. Surfaces nearby are masked off, the work takes a few hours, depending on what we find, and we finish with a tidy-up and a look at the finished work together.

  1. We clean the area and remove any loose enamel or rust.
  2. We fill the damage and sand it flush with the surrounding surface.
  3. We tint the finish on the day to suit your bath’s shade of white or colour.
  4. We apply the finish coats and polish the repair so it blends in.
  5. We leave it to cure; you can typically use the bath the following day.

Before we arrive

  • Let the surface dry out before the visit
  • Tell us about any previous repairs or coatings
  • Tell us if there are stairs or a lift

Get a quote

Pricing is simple: take a close-up of the damage and a photo from further back, send them over with your postcode, and you’ll get a fixed price back. There’s no charge for the quote and you are under no obligation.

Get a free quote

Advice

For landlords and businesses

For anyone letting property in or around Coed-mawr, we can repair and quote for several addresses together. Just send pictures for each address and we will price them together.

Housing associations and facilities teams use us for planned and reactive repairs in Gwynedd and across the UK. A repair avoids taking out and refitting, which matters when someone is living in the home.

What affects the price in Coed-mawr

Prices start from £95. A fixed quote means you know the cost before booking. We take into account:

  • The material and finish
  • How easy the damage is to reach
  • How much damage there is
  • Previous DIY repairs that have to come out

We do not add extras on the day. The price we quote from your photos is the price you pay, and if the damage turns out to be different, we discuss it before starting.

Send pictures for a quote

We price nearly every job from photos. This is what we need:

  • One sharp close-up of the damage
  • A coin or ruler next to the damage for scale
  • Natural light rather than flash
  • The material, if you know it

A quote takes minutes to ask for: photograph the damage, then the whole bath, add your postcode and send them to us. What comes back is a fixed price, not a guess.

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.