Edinburgh · Scotland
Bath Repair for Colinton Mains homes
Chip and crack repairs to enamel, acrylic and cast iron baths for homes and businesses in Colinton Mains and across Edinburgh. Free, fixed quotes from your photos.
- Repairs from £95
- Impact holes in acrylic
- A kit repair that didn’t last
How we handle bath repair in Colinton Mains
We repair just the damaged spot and colour-match it to the bath, which costs far less than replacing a fitted bath and the tiles around it. Most baths can be used again the next day. We’re frequently asked to fix a chipped rim or side and chips caused by builders, in whirlpool & spa baths, cast iron enamel and roll-top & freestanding.
A one-year guarantee comes as standard.
- Location
- Colinton Mains (EH13, EH10, EH14)
- Area hub
- Edinburgh
- Warranty
- 12 months on all our work
- Quote
- From £95. Free, fixed quote from pictures
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
DIY kit or professional repair?
The difference between a kit and a professional repair is mostly in the preparation and colour. We clean and key the area properly, mix the colour to your surface and finish it to the same sheen, and the work is guaranteed.
You can buy a DIY kit for most repairs, and they can tidy up a tiny mark. Where they fall down is colour and preparation: they come in a handful of shades, and if the surface is not prepared the repair will not last.
Repair or replace: which is better?
Many people think a damaged bath means a new one. Generally it does not: a repair keeps the bath in service for years, and costs far less than the disruption of a replacement. Repairs from £95, with every job priced individually. Rather than charging by the hour, we price the entire job up front. It depends on the damage, the material and access, and doing several items at once reduces it.
Why us?
- Fixed prices from your pictures
- Colour-matched on site
- Same prices wherever you are
- Straight answers about what a repair can do
Read our full price list or guide to resurfacing and replacement costs.
What we’re called out for in Colinton Mains
Damage during fitting is very common. Tradespeople drop tools and tiles into the bath, frequently before anyone notices. Snagging repairs like these are a regular job for us.
These are the problems we’re asked about most:
- An old repair that has yellowed or come loose
- Damage done while the bathroom was being fitted
- Scuffs and scratches in the surface
- A cracked acrylic bath
What your quote should include
- What the guarantee covers, and for how long
- How long it needs to cure
- Who turns up on the day
- Whether they match the colour on site
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid, and frequently freestanding. Chips and scratches can be filled and colour-matched, in much the same way.
Cast iron
A cast iron bath is heavy enough that most people never want to move it. Only the enamel surface wears or chips, and that’s what we repair.
For landlords and businesses
We carry out planned and one-off repairs for housing associations and facilities teams. Repairing in place avoids the disruption of a replacement, which is easier on the people living there.
Letting agents often send us pictures straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
What happens on the day
A typical visit goes like this: we arrive on time, sheet and mask the area around the job, carry out the work and clear up. Plan for two to three hours for most chips. Before we go, we will explain how long to leave it and how to look after it.
- We start by looking at the damage and confirming the plan with you.
- Loose enamel, rust and dirt are removed so the repair can bond.
- We build up the filler in layers, shaping it to the bath.
- We tint the finish by hand to match the bath.
- Finally, it’s polished to match the shine and left to cure.
Preparing for the visit
- Plan for the room to be out of bounds to pets and children
- Let the surface dry out before the visit
- Have somewhere for us to park nearby if possible
Getting a price
Pricing is simple: snap the damage close up and then the entire item, send them to us with your postcode, and we’ll reply with a fixed price. There’s no charge for the quote and you are under no obligation.
Related advice
How to care for the repair
A little care keeps the finish looking good. We recommend:
- Clean with warm water and a mild detergent
- Have new chips seen to early
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners and rinse after use.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
When a repair is not the answer
To be straight with you, there are a few things a repair will not fix:
- Leaks from the waste or overflow fittings (a plumber’s job)
- A steel bath rusted through
- A bath worn all over, where resurfacing makes more sense
If in doubt, send pictures and we will say what we think before you book.
Materials we work on in Colinton Mains
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
Covering Colinton Mains
Colinton Mains is about 3 miles south of Edinburgh, in Edinburgh. Clients in Colinton Mains get the same service as everywhere else we cover: a fixed price from your photos, and a technician at your door on the day. We cover all 175 towns and villages across Edinburgh.
Postcode districts we cover here: EH13, EH10 and EH14. From Redford Road, Greenbank Road and Oxgangs Avenue or a nearby road, a technician can come to you. We also travel to Firrhill (1 mile north-west), Oxgangs (1 mile east), Redford (1 mile west), Greenbank (1 mile north-east) and Comiston (1 mile east). Larger places within reach include Edinburgh (3 miles north), Leith (5 miles north-east), Bonnington (5 miles north-east), Greenside (4 miles north-east), Broughton (4 miles north-east) and Bellevue (4 miles north).
Landmarks near Colinton Mains
Our clients here include homes close to St Johns Colinton Mains Church, Firrhill High School and Army School of Bagpipe Music and Highland Drumming, among other places. For rail, the closest station is Slateford station, about 1.3 miles north-west of the centre. A little further out are Edinburgh City Hospital (0.5 miles north) and Cameron Toll Shopping Centre (2.8 miles north-east). The countryside around Colinton Mains includes Duddingston Loch and Craiglockhart Hill.
Questions from Colinton Mains
Will the repair show?
On a bath in good condition, a colour-matched repair is very hard to spot. On worn enamel, it can look shinier than the rest.
Is a holed acrylic bath repairable?
In most cases. Photos of the hole and the underside help us check.
Do you hold any accreditations?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. See our accreditations page for the full list.
What happens if you find more damage?
We’ll show you and explain before doing anything extra. Nothing extra is done without your say-so.
Will the repair last?
Done properly, a repair lasts for years, and ours come with a one-year guarantee. Gentle cleaning helps it last.
How much does bath repair cost in Colinton Mains?
Repairs from £95. The exact price depends on the damage, so we quote from photos. You will get a fixed figure before booking.
How long does the repair take to cure?
Normally by the following day, depending on the repair.
Which areas do you work in?
The entire UK, including all of Edinburgh. Just include your postcode and we will confirm dates.
Other services in Colinton Mains
About our accreditations · Every repair comes with a one-year guarantee.
