Bedford Borough · England
Bath Repair in Colmworth
Chip and crack repairs to enamel, acrylic and cast iron baths at your home in Colmworth, with a one-year guarantee on every repair.
- Repairs from £95
- A chipped rim or side
- Scratches you can feel with a fingernail
For landlords and businesses
Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover. We hold CHAS, Constructionline and SafeContractor accreditations.
For anyone letting property in or around Colmworth, we can repair and quote for several addresses together. Just send photos for each address and we’ll come back with a combined price.
How we handle bath repair in Colmworth
Bath repair is our most common job. Chips on the rim, rust around the waste and cracks in acrylic are all fixed without removing the bath, normally in one visit. We work on acrylic, roll-top & freestanding and whirlpool & spa baths, and common reasons people contact us are rust by the waste and overflow and damage done while the bathroom was being fitted.
All our work is covered by a one-year guarantee, wherever you are in Bedford Borough.
- Where
- Colmworth (MK44)
- County
- Bedford Borough
- Guarantee
- One year on every repair
- Price
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Last updated
- 23 October 2026
Repairs by material
Cast iron
Cast iron baths are thick and very strong, finished with fired enamel. A chip down to the iron can rust, but the body of the bath lasts a very long time, which makes it well worth repairing.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There is no rust, but cracks, holes and scratches happen, and a crack only stays repaired if it’s supported underneath.
Prices and what affects them
Prices start from £95. Quotes are free and the price is fixed. What we look at:
- How many areas need work
- The type of damage
- Unusual colours or finishes
- Whether old repairs or coatings need taking off
Set against the cost of replacement, repairing generally costs far less, because there’s no removal, plumbing or making good. The quote lists exactly what you’re paying for.
Getting a price from photos
Most quotes are done from pictures alone. To help us price it:
- Something in shot to show the size
- A picture taken from further back
- The postcode, so we can plan the visit
- Natural light rather than flash
For most jobs, pictures are all we need to give you a price. Tell us what happened and where you are, and we’ll send back a fixed quote and some dates.
About Colmworth
Colmworth is about 5 miles west of St Neots, in Bedford Borough. We travel to clients in Colmworth and the surrounding area, so nothing has to leave your home. Colmworth is one of 94 towns and villages in Bedford Borough we cover. You can also see our page for London, about 51 miles away.
We work across the MK44 postcode area. Whether you live on Church Road, Queens Road and Honeydon Road or anywhere nearby, a technician can come to you. Close by, we cover Honeydon (2 miles east), Staploe (2 miles east), Upper Staploe (2 miles east), Little Staughton (3 miles north) and Duloe (3 miles east). Further out, we also cover Bedford (6 miles south-west), Kempston (9 miles south-west), Cauldwell (7 miles south-west), Wixams (10 miles south), Wootton (10 miles south-west) and Goldington (5 miles south-west).
Near you in Colmworth
Around Colmworth, we work in homes near The Wheatsheaf Public House and Church of St Denys and the streets around them. Nearby you will also find Taggart Tile Museum (3.8 miles north) and Colmworth Manor and Motte (under half a mile south). Open spaces near Colmworth include Begwary Brook.
Colmworth: your questions answered
Can you repair something that is been repaired before?
Yes, we often do. Removing the old work can add time, and that’s in the quote.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Include photos of each item.
Are you accredited?
Yes, including CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can tenants book a repair?
Yes, though it’s best to check with your landlord first. Many landlords are happy for a repair to be arranged before the end of a tenancy.
Will there be a smell?
There can be some smell while we work, which is why we ventilate. It clears as the materials cure.
Do you repair coloured baths?
Yes. The colour is mixed on site to suit your bath, including pastel and older colours.
How long before I can use the bath?
Normally within a day, depending on the repair.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You will not be charged for anything you haven’t agreed.
When we’d advise against a repair
A few problems are outside what a surface repair can do:
- Flexing caused by a failed cradle or loose feet
- Leaks from the waste or overflow fittings (a plumber’s job)
- Rust that has eaten right through a steel bath
Send us photos and we will tell you honestly before you book.
Surfaces we repair
- Cast iron enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Acrylic
- Pressed steel enamel
How to care for the repair
After the repair has cured, a few habits help it last:
- Don’t leave a fresh chip for long
- Avoid scourers, wire wool and gritty cream cleaners
- Don’t leave razors or cans standing in the bath
- A dripping tap stains enamel, so fix it early
Use gentle, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust can start.
A small chip is a quick job. Left alone, they stain and can rust, so early repair saves time and money.
How it works
Visits start with a quick look at the job together, so there are no surprises. Next, we cover and mask everything nearby and the work begins. You can expect it to take a few hours, and we’ll keep you posted as we go.
- We start by cleaning the damage and taking out loose enamel and rust.
- Next we fill the damage and sand it smooth and level.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- Once it has cured, usually by the following day, the bath is ready to use.
How to prepare
- Point us to the nearest place to park
- Mention any earlier repairs or resurfacing
- Let us know about parking or access
Ask for a price
For a price in Colmworth, the easiest route is pictures: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Advice
Places near Colmworth
More services for Colmworth
DIY kit or professional repair?
If you do try a kit, read the instructions carefully, and don’t use it until it has fully cured. If it fails, we can still put it right.
For a hairline mark somewhere you’ll never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Repairing versus replacing in Colmworth
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. It helps to know what pushes a price up or down: access, material, the extent of the damage and whether we can do several items together. Photos let us give you a fixed figure.
Why choose Surface Doctor in Colmworth
- CHAS, Constructionline and SafeContractor accredited
- Colour mixed on the day to match
- One visit for most repairs
- A year’s guarantee on all work
Read our prices page and resurfacing vs replacement cost guide.
About our accreditations · Every repair comes with a one-year guarantee.
