Slough · England
Bath Repair in Colnbrook
We travel to Colnbrook for chip and crack repairs to enamel, acrylic and cast iron baths. Nothing is taken out, and the work is guaranteed.
- Repairs from £95
- Rust by the waste and overflow
- A failed DIY repair that is discoloured or lifting
Bath repair in Colnbrook, done in place
Whether your bath is steel, cast iron or acrylic, we can repair it. Each material is repaired a little differently: metal baths need any rust dealt with first, and acrylic cracks need support from behind. We are frequently asked to fix a chip where the taps sit and scuffs and scratches in the surface, across pressed steel enamel, whirlpool & spa baths and acrylic.
All our work comes with a one-year guarantee, wherever you are in Slough.
- Area
- Colnbrook (SL3)
- County
- Slough
- Warranty
- A year, on every repair
- Quote
- From £95. Free, fixed price from pictures
- Telephone
- 0345 017 0787
- Updated
- 23 October 2026
When we’d advise against a repair
To be straight with you, some problems need a different fix:
- A bath worn all over, where resurfacing makes more sense
- Cracks in acrylic we can’t reach from underneath
- Water coming from the waste or taps rather than the bath
Not sure? Send photos and we’ll give you a straight answer.
Materials we repair
- Cast iron enamel
- Roll-top & freestanding
- Pressed steel enamel
- Acrylic
- Whirlpool & spa baths
What bath repair costs
Prices start from £95. There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- What kind of damage it is
- Previous DIY repairs that have to come out
- What the surface is made of
Most people are surprised how affordable a repair is, particularly next to the cost of replacement. Photos let us give you the exact figure.
Quotes from your photos
Before you send pictures, a few simple things make all the difference:
- One sharp close-up of the damage
- Any details about the material
- Details of any past repairs
- One picture of the whole bath
Send us a picture of the damage and a wider shot of the whole item, with your SL3 postcode, and we’ll come back with a fixed quote.
What we do, step by step
Arrival times are agreed in advance, so you know when to expect us. Once we are there, the work takes a morning or an afternoon. The room is left tidy and you’ll know when it can be used.
- Dust sheets and masking go down around the bath.
- The damaged area is cleaned, keyed and degreased.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the next day.
Preparing for the visit
- Let us know if it has been repaired before
- Open a window if you can
- Mention any parking restrictions or tricky access
Get a quote
Getting a quote takes a couple of minutes: photograph the damage, then the entire bath, include your postcode and send them over. What comes back is a fixed price, not a guess.
Advice
Should I try a DIY kit first?
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it doesn’t stop a professional repair. Just mention it when you send photos, as it can add time.
DIY kits are sold for most surfaces, and they can tidy up a tiny mark. Where they fall down is colour and preparation: kits come in a few standard shades, and without proper cleaning and keying the filler frequently lifts.
Do you need bath repair in Colnbrook?
Nearly all the chips we see start with something being dropped: a shampoo bottle, a shower head, a tile or a tool during a refit. On steel and cast iron baths, a chip that reaches the metal lets water in, and rust follows.
Common reasons people in Colnbrook contact us include:
- An old repair that has yellowed or come loose
- Rusty patches near the plughole
- Scratches you can feel with a fingernail
- Cracks in an acrylic bath
Before you book anyone
- Whether the price covers travel
- Whether the price is fixed and includes VAT
- How the room is protected while they work
- What preparation is included
Also near Colnbrook
What else we do in Colnbrook
Common questions in Colnbrook
Can you redo an old repair?
Yes. We remove the old filler and start again. Tell us about it when you send photos.
Do you do work for letting agents?
Yes. We carry out repairs for householders, landlords, letting agents, builders and businesses in Colnbrook.
How do I get a price for bath repair in Colnbrook?
Prices start from £95. The exact price depends on the damage, so we quote from pictures. You know the full cost before anything is booked.
Can you repair a chip on a coloured bath?
Yes. We mix the colour on the day to match, including pastel and older colours.
How soon can you come?
It depends on the time of year and where you are. We’ll offer you dates when we send your quote.
Are there extra charges for Colnbrook?
We don’t add a call-out fee. Your fixed quote includes everything.
Do you come to Colnbrook?
Yes. We work across the UK and travel to Colnbrook and the rest of Slough. Send us pictures for a fixed quote, or call 0345 017 0787.
What information do you need?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Work for landlords and builders
Letting agents often send us photos straight from the inventory. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.
For anyone letting property in or around Colnbrook, we can repair and quote for several addresses together. Send pictures for each one and we’ll price them together.
How to care for the repair
Once the work has cured, treat it gently:
- Clean with warm water and a mild detergent
- Fix dripping taps early to stop staining and limescale
- Give the bath a quick rinse after use
- Don’t leave a fresh chip for long
A repaired bath needs no special treatment. Avoid bleach-based and gritty cleaners.
Don’t leave a chip on a steel or cast iron bath. Water gets to the metal and rust starts, and a rust spot is a bigger repair than a clean chip.
Where we work around Colnbrook
Colnbrook is about 4 miles north of Staines-upon-Thames, in Slough. Book a date that suits you, and you will know when to expect us, so there is no waiting around. Colnbrook is one of 31 towns and villages in Slough where we work. We work right across the region, from Colnbrook to London (19 miles away).
Postcode districts we cover here: SL3. From High Street, Rayners Close and Drift Way or a nearby road, we can come to you. Other places close to Colnbrook include Poyle (1 mile south-east), Brands Hill (1 mile west), Horton (1 mile south-west), Stanwell Moor (2 miles south-east) and Ditton (2 miles west). We also work in nearby towns such as Slough (4 miles north-west), Cippenham (5 miles north-west), Chalvey (4 miles north-west), Britwell (5 miles north-west), Upton (3 miles north-west) and Burnham (7 miles north-west).
Near you in Colnbrook
Around Colnbrook, we work in homes near Church of St Thomas, The Red Lion Public House and Langley Grammar School. Also close by are Arthur Jacob Nature Reserve (0.8 miles south) and Colnbrook Church of England Primary School (under half a mile east). Colnbrook’s nearest station is Sunnymeads station, roughly 1.7 miles south-west. Nearby you’ll also find Windsor Castle (3.4 miles west) and Upton Hospital (3.2 miles north-west). Not far away are Uxbridge Moor and Staines Reservoirs.
Materials and what they mean for the repair
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so the metal is treated and sealed before the repair.
Cast iron
Cast iron is heavy and rigid, with a fused enamel surface. A chip down to the iron can rust, but the bath itself lasts for generations, which makes it well worth repairing.
About our accreditations · Every repair comes with a one-year guarantee.
