Surrey · England

Bath Repair in Staines-upon-Thames

Bath repair for Staines-upon-Thames, without a refit. Send us photos for a fixed price, then we come to you.

  • Repairs from £95
  • An old repair that has yellowed or come loose
  • Deep scratches in acrylic
Surface Doctor technician refinishing the outside of a roll-top bath

Bath repair in Staines-upon-Thames

Bath repair in Staines-upon-Thames without replacing anything

You don’t need a new bath because of a chip. We fill the damage, shape it to the curve of the bath and refinish it, with the colour mixed on site. Typical jobs include snagging damage from a refit and a cracked acrylic bath, on whirlpool & spa baths, cast iron enamel and acrylic.

Big or small, it’s backed by a one-year guarantee.

Before and after: a chipped, rust-stained bath around the plughole
Where
Staines-upon-Thames (TW18, TW20, TW19)
County
Surrey
Cover
A year, on every repair
Quote
From £95. Free and fixed, from your photos
Telephone
0345 017 0787
Page updated
23 October 2026

Repairing versus replacing in Staines-upon-Thames

A repair makes sense whenever the damage is localised. It costs far less than a new bath plus fitting, it takes one visit, and the bathroom stays exactly as it is. Prices start from £95. The price reflects the work involved, not your postcode. You’ll see the full price before booking, with nothing added on the day.

Why choose Surface Doctor in Staines-upon-Thames

  • Work done at your home or business
  • No need to remove anything
  • Colour mixed on the day to match
  • Fixed prices from your photos

Read our prices page or bath cost comparison.

What a repair cannot fix

A few problems are outside what a surface repair can do:

  • A bath that flexes because its feet or cradle have failed (that needs fixing first)
  • A steel bath rusted through
  • Cracks in parts of an acrylic bath we can’t get to from below

If in doubt, send photos and we will say what we think.

Materials we repair

  • Whirlpool & spa baths
  • Cast iron enamel
  • Roll-top & freestanding
  • Pressed steel enamel
  • Acrylic

The process

On the day itself, there’s little for you to do. Let us in and show us the room, and we will get on with it. Most visits take a morning or an afternoon.

  1. Dust sheets and masking go down around the bath.
  2. We clean, key and degrease the damage, and any rust is treated.
  3. We fill it, let it set, then sand it flush.
  4. Colour and gloss are matched to the surrounding surface.
  5. We clear up and give you the curing time, normally until the next day.

Getting ready for the visit

  • Avoid using the area for a few hours before we arrive
  • Keep a parking space free if you can
  • Open a window if you can

Getting a price

Pricing is simple: snap the damage close up and then the entire item, send them over with your postcode, and you will get a fixed price back. There’s no charge for the quote and no obligation.

Get a fixed quote

Related advice

Questions from Staines-upon-Thames

How long before I can use the bath?

Normally by the following day, depending on the repair.

Can you quote from pictures?

In nearly every case. We only ask to see it in person if the pictures cannot show what we need.

Do you charge for travel?

No. Our quotes include travel, with the same prices everywhere we work.

Is a bath repair durable?

A properly prepared repair should last a long time, and ours come with a one-year guarantee. Gentle cleaning helps.

Can you repair a failed DIY repair?

Regularly. The old material comes out, any rust is treated, then we repair it properly.

Do the materials smell?

Expect a mild smell while we are working.

Do you do work for letting agents?

Yes, frequently. We can quote for several properties together and work between tenancies.

Is the work guaranteed?

All our work carries a one-year guarantee. We’ll explain what it covers when we quote.

Where we work around Staines-upon-Thames

Staines-upon-Thames is about 7 miles south-west of Hayes, in Surrey. We travel to clients in Staines-upon-Thames, so nothing has to leave your home. Staines-upon-Thames is one of 395 places in Surrey where we work. We work right across the region, from Staines-upon-Thames to London (about 18 miles away).

We work across TW18, TW20 and TW19. Jobs here include addresses on High Street, Goring's Square and London Road. Staines-upon-Thames sits on or near the A308 and A320, which makes travel easy. Close by, we cover Egham Hythe (1 mile south-west), Penton Hook (2 miles south), Hythe End (2 miles north-west), Egham (2 miles west) and Thorpe (2 miles south-west). We also work in nearby towns such as Guildford (13 miles south), Woking (8 miles south), Camberley (12 miles south-west), Epsom (12 miles south-east), Ewell (12 miles south-east) and Walton-on-Thames (5 miles south-east).

Near you in Staines-upon-Thames

We visit homes around The Magna Carta School, Penton Park and The Star pub, among other places. Nearby too are Riverbridge Primary School (less than half a mile south) and Church of St Peter (less than half a mile west). Staines-upon-Thames has its own railway station: Staines station. Nearby you’ll also find Ashford Hospital (1.8 miles north-east) and Spelthorne Museum (0.5 miles north-west). For a walk, there is Staines Reservoirs and Kempton Park Reservoirs.

Map of Staines-upon-Thames © OpenStreetMap contributors

Aftercare tips

Most damage we see is avoidable. A few tips:

  • Protect the bath with a towel when doing jobs nearby
  • Keep abrasive pads and gritty cleaners away from the bath
  • Check that an acrylic bath doesn’t move when you stand in it
  • Rinse the bath after use, especially in hard water areas

Give the repair the full curing time we recommend before using the bath. From then on, mild cleaning is all it needs.

Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Take it off before we arrive.

Different materials, different repairs

Acrylic

Acrylic feels warm and is light, but it needs firm support underneath. Cracks are strengthened from behind before the front is finished.

Pressed steel

Pressed steel is thinner and lighter, with an enamel finish like cast iron. Exposed steel rusts fast, especially around the waste, so early repairs matter.

Work for landlords and builders

Builders, developers and site managers book us for snagging repairs, fixing chips and scratches before handover so nothing needs replacing. We hold CHAS, Constructionline and SafeContractor accreditations.

We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we can arrange access with the tenant directly if that helps.

Prices and what affects them

Repairs from £95. We don’t charge extra for travel to Staines-upon-Thames. The price comes down to:

  • How many items we do on one visit
  • Whether it’s a chip, crack, burn or wear
  • The size and number of damaged areas
  • Whether old repairs or coatings need taking off

Compared with replacing, a repair is usually a fraction of the price, because nothing has to be taken out, refitted or made good. The quote lists exactly what you’re paying for.

How to get a fixed quote

You can typically get a fixed price without us visiting. To help us price it:

  • Whether it’s been repaired or coated before
  • A photo taken from further back
  • A clear, close picture of the problem area
  • What it’s made of, if you know

Send us a picture of the damage and a wider shot of the entire item, with your TW18 postcode, and we will come back with a fixed quote.

Do you need bath repair in Staines-upon-Thames?

Most bath damage comes from something dropped: bottles, shower heads, tiles and tools. On steel and cast iron baths, a chip that reaches the metal will start to rust.

Look out for any of the following:

  • Deep scratches in acrylic
  • Impact holes in acrylic
  • A chip where the taps sit
  • A chipped rim or side

What your quote should include

  • Who will actually do the work
  • What preparation is included
  • What happens if they find more damage
  • What the guarantee covers, and for how long

10 questions to ask before booking

CHAS accredited contractor and Constructionline logos SafeContractor, SMAS Worksafe and Builder’s Profile logos

About our accreditations · Every repair comes with a one-year guarantee.

Read what customers say about us on Trustpilot.