Lincolnshire · England
Bath Repair in Colsterworth
Bath repair for Colsterworth, without a refit. Get a fixed price from your photos, then we come to you.
- Repairs from £95
- Holes from dropped items
- A cracked acrylic bath
About our bath repair in Colsterworth
Whatever the damage, the aim is the same: a smooth, solid repair that blends in. We prepare the area properly, fill and shape it, then match the colour and gloss so it sits flush with the rest of the bath. Typical jobs include scratches you can feel with a fingernail and a hole punched through by something heavy, on whirlpool & spa baths, cast iron enamel and acrylic.
Peace of mind is built in: our one-year guarantee applies to every job, and we explain what it covers before booking.
- Area
- Colsterworth (NG33)
- County
- Lincolnshire
- Warranty
- 12 months on all our work
- Quotes
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Last updated
- 23 October 2026
Why repair rather than replace?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and you keep the bath you chose. If the entire surface is worn, re-enamelling may make more sense, and we will tell you. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send photos and you will get a fixed figure.
What you get with us
- CHAS and Constructionline accredited
- No extra charge for your area
- Fixed prices from your photos
- Honest advice, even when it means no job
Read our prices page or guide to resurfacing and replacement costs.
Also near Colsterworth
Also in Colsterworth
Materials and what they mean for the repair
Cast iron
Cast iron baths are so heavy that repairing in place makes obvious sense. The enamel is the part that wears or chips, and that’s what we repair.
Pressed steel
Steel baths and trays have a thin metal body under the enamel. Once a chip exposes it, rust follows quickly, so we treat and seal the metal before filling.
Keeping it looking good
So the finish stays in good condition:
- Keep abrasive pads and gritty cleaners away from the bath
- A dripping tap stains enamel, so fix it early
- Do not leave razors or cans standing in the bath
- Give the bath a quick rinse after use
Look after the repair the same way as the bath: a soft cloth and washing-up liquid is all it needs. Keep scouring pads and gritty cleaners away from it.
Small chips are quick to repair. Leave them and they collect dirt, stain and, on metal baths, rust, so early repair saves time and money.
What bath repair costs
Repairs from £95. There are no hourly rates or hidden extras. The price is based on:
- Unusual colours or finishes
- The material and finish
- Previous DIY repairs that have to come out
- How many items we do on one visit
A repair is priced on what needs doing, not your postcode. You will see the full price before booking, with nothing added on the day.
How to get a fixed quote
When you take your pictures, a few simple things make all the difference:
- Good light, ideally daylight, without flash glare
- A coin beside the damage so we can judge size
- A close-up of the damage, in focus
- The postcode, so we can plan the visit
The quickest way to a price is to send a couple of photos through our quote form or call us. We’ll say right away whether it can be repaired.
What a repair can’t fix
In fairness, there are a few things a repair will not fix:
- A bath worn all over, where resurfacing makes more sense
- Rust that has eaten right through a steel bath
- Water coming from the waste or taps rather than the bath
Not sure? Send pictures and we will give you a straight answer.
Materials we work on in Colsterworth
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
- Cast iron enamel
How the visit works
Once we are through the door, we keep the work contained to the one room. We mask off everything nearby, the work takes a morning or an afternoon, depending on what we find, and we finish with a tidy-up and a look at the finished work together.
- Dust sheets and masking go down around the bath.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- Colour and gloss are matched to the surrounding surface.
- We clear up and give you the curing time, normally until the day after.
Preparing for the visit
- Mention any parking restrictions or tricky access
- Move bottles, mats and clutter away from the area
- Point us to the nearest place to park
Getting a price
A quote takes minutes to ask for: take one close-up and one wider shot of the bath, include your postcode and send them to us. What comes back is a fixed price, not a guess.
Advice
Can I fix it myself?
We understand the appeal of fixing it yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
If you’re set on a kit, follow its instructions closely, and give it the full curing time. If it doesn’t work out, we can still repair it properly.
Landlords, agents and businesses in Colsterworth
For anyone letting property in or around Colsterworth, we can repair and quote for several addresses together. Just send photos for each address and we will come back with a combined price.
We work for landlords, letting agents and housing providers in Colsterworth as well as householders. Repairing between tenancies keeps void periods short, and it costs much less than replacing.
Colsterworth questions
Do the materials smell?
There can be some smell while we work, which is why we ventilate. It fades as everything cures.
What happens if you find more damage?
We will show you and explain before doing anything extra. Nothing extra is done without your say-so.
Can you do more than one item on the same visit?
Yes. Combining jobs on one visit brings the cost down. Send photos of everything you’d like done.
Are there extra charges for Colsterworth?
There is no separate call-out charge. Your fixed price includes everything.
Is a holed acrylic bath repairable?
Normally, yes, if we can reach behind it. We back the hole, fill it and refinish the surface.
Are you accredited?
Yes. Our accreditations include CHAS, Constructionline and SafeContractor. The full list is on our accreditations page.
Can you price it without visiting?
Generally, yes. A close-up and a wider photo are enough to give a fixed quote.
Can you redo someone else’s repair?
Generally, yes. We remove the old repair before doing a new one, so let us know about it.
Covering Colsterworth
Colsterworth is about 8 miles south of Grantham, in Lincolnshire. Clients in Colsterworth get the same service as everywhere else we cover: a fixed price from your pictures, and a technician at your door on the day. We cover all 732 towns and villages across Lincolnshire. You can also see our page for Birmingham, about 58 miles away.
We cover every part of the NG33 postcode area and the streets around it. Streets in the area include High Street, Back Lane and Colster Way, all of which we cover. If you are just outside Colsterworth, we cover Woolsthorpe-by-Colsterworth (1 mile north-west), Easton (2 miles north), Skillington (2 miles north-west), Stoke Rochford (3 miles north) and Great Ponton (4 miles north). We also work in nearby towns such as Grantham (8 miles north), Stamford (12 miles south-east), Bourne (10 miles east), Austerby (11 miles east), Market Deeping (15 miles south-east) and Spittlegate (7 miles north).
Landmarks near Colsterworth
In Colsterworth, that means homes near The White Lion pub, Church of St John the Baptist and Colsterworth Church of England Primary School. Green spaces nearby include Cribb's Meadow.
About our accreditations · Every repair comes with a one-year guarantee.
