Staffordshire · England
Bath chip & crack repair in Colton, Staffordshire
Chip and crack repairs to enamel, acrylic and cast iron baths in Colton, carried out at your home and guaranteed for a year.
- Repairs from £95
- A chipped rim or side
- A kit repair that didn’t last
About our bath repair in Colton
Chips, cracks, rust spots and small holes can be repaired with the bath left exactly where it is. There is no plumbing to disconnect, the tiles are not touched, and the repaired area is colour matched so it blends in. Our repair technicians work on acrylic, roll-top & freestanding and whirlpool & spa baths, and the jobs we see most are damage beneath the taps and hairline or through cracks in acrylic.
The work is covered for a year after we finish. Just call us if there’s a problem and we’ll come back.
- Location
- Colton (WS15)
- Area hub
- Staffordshire
- Cover
- 12 months on all our work
- Price
- From £95. Fixed and free, based on photos
- Phone
- 0345 017 0787
- Updated
- 23 October 2026
The process
We turn up when we said we would, introduces themselves and looks over the damage before anything else. Dust sheets and masking tape go down before any work starts. The work itself takes a few hours, and the room is left clean and tidy.
- We start by cleaning the damage and taking out loose enamel and rust.
- We fill the damage and sand it flush with the surrounding surface.
- We tint the finish on the day to suit your bath’s shade of white or colour.
- We build up the finish and polish it into the surrounding enamel.
- We leave it to cure; you can typically use the bath the following day.
Getting ready for the visit
- Move bottles, mats and clutter away from the area
- Keep children and pets away from the room on the day
- Mention any earlier repairs or resurfacing
Get a quote
Ring 0345 017 0787, or send us photos through the quote form. With one close-up and one wider picture, we can give you a fixed price without visiting.
Advice
Towns and villages near Colton
What else we do in Colton
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It costs less, takes less time and causes far less upheaval, and the bathroom stays as it is. Where the entire surface is tired, we may suggest re-enamelling instead. Our bath repair starts from £95. A few things move the price: access, material, the extent of the damage and whether we can do several items together. Send pictures and you will get a fixed figure.
Why us?
- CHAS, Constructionline and SafeContractor accredited
- Straight answers about what a repair can do
- No need to remove anything
- Rooms protected and left tidy
Read our full price list and resurfacing vs replacement cost guide.
Landlords, agents and businesses in Colton
Hotels, guest houses and holiday lets can’t afford rooms out of action for long, so we keep visits short and tidy. We can work around your bookings.
For developers and builders, we fix damage before handover, saving last-minute replacements. We can visit several plots in one trip to keep costs down.
DIY repairs versus a professional job
If you’ve already tried a DIY fix, that’s fine. We remove the old filler and start again, so it will not stop us repairing it. Just mention it when you send pictures, as it can add time.
For a hairline mark somewhere you will never see, a kit may be enough. For damage in plain view, cracks, holes or rust, or coloured finishes, a professional repair is worth it.
Do you need bath repair in Colton?
The usual cause is something heavy dropped into the bath, and building work is a common culprit. Acrylic baths crack for a different reason: poor support underneath, so the bath flexes when it’s full.
It’s worth getting a quote if you see:
- Damage beneath the taps
- A hole punched through by something heavy
- Rust spots around the plughole
- Snagging damage from a refit
Before you book anyone
- How the colour is matched
- The length of the guarantee and what it covers
- What happens if the damage is worse than the pictures show
- Whether the price covers travel
How we price bath repair
Repairs from £95. You will know the full cost before you book. We look at:
- Whether old repairs or coatings need taking off
- Unusual colours or finishes
- How many items we do on one visit
- The material
We don’t add extras on the day. What we quote from your photos is what you pay, and if the damage turns out to be different, we discuss it before starting.
Getting a price from photos
It only takes a minute to photograph the damage. Please include:
- The material, if you know it
- Details of any past repairs
- Good light, ideally daylight, without flash glare
- A coin or ruler next to the damage for scale
There’s no need for us to visit first. Nearly every job can be priced from pictures: we need a close-up, a wider picture and your postcode, and we will reply with a fixed price.
Where we work around Colton
Colton is about 2 miles north of Rugeley, in Staffordshire. Book a date that suits you, and you will know when to expect us, so you’re not left waiting in all day. Colton is one of 512 places in Staffordshire we cover. We work right across the region, from Colton to Birmingham (22 miles away).
Postcode districts we cover here: WS15. Whether you live on High Street, Aspley Place and Martlin Lane or anywhere nearby, a technician can come to you. Close by, we cover Stockwell Heath (1 mile north), Bishton (2 miles west), Rugeley (2 miles south), Etchinghill (2 miles south-west) and Slitting Mill (2 miles south-west). Further out, we also cover Stafford (8 miles west), Burton upon Trent (12 miles east), Tamworth (15 miles south-east), Cannock (7 miles south-west), Lichfield (8 miles south-east) and Burntwood (7 miles south).
Landmarks near Colton
Typical jobs here are in homes near The Hart School, Church of St Mary and The St. Mary's CofE Primary School, among other places. For rail, the closest station is Rugeley Trent Valley station, roughly 1 mile south of the centre. Nearby you will also find Cannock Castle Ring (4.8 miles south) and Museum of Childhood And Costume (2.2 miles north). Open spaces near Colton include Tixall Wide and Wolseley Centre.
When we would advise against a repair
Honesty matters more than a booking, so here’s what a repair will not do:
- Flexing caused by a failed cradle or loose feet
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- Leaking fittings, which need a plumber
Not sure? Send pictures and we will give you a straight answer.
Materials we repair
- Pressed steel enamel
- Cast iron enamel
- Whirlpool & spa baths
- Acrylic
- Roll-top & freestanding
Colton: your questions answered
Does someone need to be in?
Someone needs to let us in and show us the job. You do not need to watch us work.
How long before I can use the bath?
Typically the following day. We will tell you the exact curing time when we finish.
How much does bath repair cost in Colton?
Prices start from £95. Because every job differs, we price from photos. You know the full cost before anything is booked.
Can you price it without visiting?
In nearly every case. We only ask to see it in person if the pictures cannot show what we need.
Is my repair covered?
All our work carries our one-year guarantee. We’ll explain what it covers when we quote.
Will the price change on the day?
We stop, show you and agree any change before carrying on. You won’t be charged for anything you haven’t agreed.
Is a cracked acrylic bath repairable?
Most of the time. The back of the crack is strengthened before the front is filled and refinished, so access behind the panel is important.
What happens next?
You get a fixed quote and available dates. If anything’s unclear, we’ll ask for another photo.
Different materials, different repairs
Composite and resin
Stone resin and composite baths are heavy and solid. Chips and scratches are filled and matched, in much the same way.
Acrylic
Acrylic baths are moulded sheet reinforced underneath. There’s no rust, but cracks, holes and scratches happen, and cracks need support from behind to stay fixed.
About our accreditations · Every repair comes with a one-year guarantee.
