Staffordshire · England
Bath Repair in Slitting Mill
Bath repair in and around Slitting Mill: a fixed quote from photos, a tidy visit and a one-year guarantee.
- Repairs from £95
- Chips on the rim or sides
- Rust by the waste and overflow
What we do, step by step
When we visit, we arrive at the time we have agreed, cover the area with dust sheets and masking, and set to work. Expect it to take a few hours, depending on the damage. We tidy up before we leave and let you know when you can use it again.
- We protect the bath and the floor around it.
- We clean, key and degrease the damage, and any rust is treated.
- We fill it, let it set, then sand it flush.
- We match both the colour and the shine.
- We clear up and give you the curing time, normally until the day after.
How to prepare
- Avoid using the area for a few hours before we arrive
- Tell us about any previous repairs or coatings
- Clear the area around the damage
Getting a price
The quickest way to a price is to send a couple of pictures through our quote form or ring us. We’ll say straight away whether it can be repaired.
Advice
Bath repair in Slitting Mill, done in place
A repair fixes just the damaged area and blends it into the rest of the bath, which is far cheaper than replacing a fitted bath and the tiles around it. Most baths can be used again the following day. If you are dealing with a cracked acrylic bath and an old repair that has yellowed or come loose, we can help.
You’re covered after we leave: each job carries a one-year guarantee, and we’ll explain exactly what it covers when we quote.
- Area
- Slitting Mill (WS15)
- Area hub
- Staffordshire
- Warranty
- A year, on every repair
- Quotes
- From £95. Free, fixed quote from pictures
- Call
- 0345 017 0787
- Page updated
- 23 October 2026
Also near Slitting Mill
Other services in Slitting Mill
What we can’t put right
Some problems need a builder, plumber or fitter rather than us:
- Cracks in acrylic we cannot reach from underneath
- A whole bath that’s dull or worn, where a full re-enamel is the better fix
- A bath that flexes because its feet or cradle have failed (that needs fixing first)
If in doubt, send pictures and we’ll say what we think.
Materials we repair
- Cast iron enamel
- Acrylic
- Pressed steel enamel
- Roll-top & freestanding
- Whirlpool & spa baths
What affects the price in Slitting Mill
Repairs from £95. You will not pay by the hour. The price depends on:
- The material
- Access to the area
- Whether we combine several jobs
- Previous DIY repairs that have to come out
The price reflects the work involved, not where you live. You will see the full price before you book, with no extras added later.
How to get a fixed quote
You can normally get a fixed price without us visiting. To help us price it:
- A coin beside the damage so we can judge size
- A clear, close picture of the problem area
- What it’s made of, if you know
- A picture taken from further back
For a price in Slitting Mill, the easiest route is photos: one close up, one from further back, plus your postcode. We reply with a fixed quote and our next available dates.
Can I fix it myself?
If you’ve already tried a DIY fix, that’s fine. We take the old repair out and do it properly, so it won’t stop us repairing it. Just mention it when you send photos, as it can add time.
It’s natural to want to try a repair yourself. The risk is that a kit repair hides the damage for a while, then fails, and then the old filler has to be removed first.
For landlords and businesses
We regularly price jobs from inventory or check-out pictures. You can have a price before you arrange access, and we liaise with tenants about access if you’d like us to.
We’re used to working with agents and managing companies. Just send photos, the address and how to get access and we’ll arrange it.
Looking after it afterwards
Much of the damage we repair could have been avoided. These habits help:
- Keep abrasive pads and gritty cleaners away from the bath
- Cover the bath during DIY or decorating
- Fix dripping taps early to stop staining and limescale
- Do not leave razors or cans standing in the bath
Clean with mild, non-abrasive cleaners and avoid dropping heavy items on the repaired area. Get any new chip seen to quickly, before rust sets in.
Tape over a fresh chip or crack until it’s repaired, so water cannot get in. Remove it before the repair.
Slitting Mill and nearby
Slitting Mill is about 1 mile west of Rugeley, in Staffordshire. Whether you’re in the middle of Slitting Mill or on the outskirts, we offer exactly the same service: a fixed quote, a tidy visit and a guarantee. Slitting Mill is one of 512 towns and villages in Staffordshire where we work. Our jobs stretch from Slitting Mill to Birmingham (20 miles away).
Postcode districts we cover here: WS15. Whether you live on Oakley Copse, Slitting Mill Road and Post Office Lane or anywhere nearby, a technician can come to you. Nearby, we also work in Etchinghill (1 mile north), Rugeley (1 mile east), Brereton (2 miles east), Bishton (2 miles north) and Breretonhill (2 miles south-east). Larger places within reach include Stafford (8 miles north-west), Burton upon Trent (14 miles east), Tamworth (15 miles south-east), Cannock (5 miles south-west), Lichfield (7 miles south-east) and Burntwood (5 miles south).
Around Slitting Mill
Locally, our jobs take us to homes close to The John Bamford Primary School, St John the Baptist and Fair Oak Academy, among other places. The closest station to Slitting Mill is Rugeley Town station, about 0.9 miles east. Further afield, we also cover the area around Cannock Chase Hospital (5.2 miles south-west) and Cannock Castle Ring (3 miles south). Green spaces nearby include Tixall Wide and Wolseley Centre.
Common questions in Slitting Mill
Do the materials smell?
A little, depending on the job. Open windows and an extractor fan help.
Is my repair covered?
Yes: twelve months. If there is a problem with the work in that time, we come back and put it right.
Can you price it without visiting?
Normally, yes. A close-up and a wider photo are enough to give a fixed quote.
How do I book?
Some pictures, your postcode and how to reach you. On the day, we only need access to the room.
Are you a vetted contractor?
We’re accredited with CHAS, Constructionline, SafeContractor, SMAS Worksafe and Builder’s Profile.
Will the price change on the day?
We will show you and explain before doing anything extra. You won’t be charged for anything you haven’t agreed.
Do you work in Slitting Mill?
Yes. We cover the entire UK and come to Slitting Mill and the rest of Staffordshire. Send us pictures for a fixed quote, or call 0345 017 0787.
Can tenants book a repair?
We can work for tenants, landlords or agents. Get your landlord’s agreement first.
Repair or replace: which is better?
When the bath is otherwise sound, repairing beats replacing. It’s quicker, cheaper and far less disruptive, and the bathroom stays as it is. Where the whole surface is tired, we may suggest re-enamelling instead. Repairs from £95, with every job priced individually. No two jobs are quite the same, so we price each one individually. The size and type of damage, the material and access all play a part, and combining jobs on one visit brings the cost down.
Why us?
- Accredited with CHAS, Constructionline and SafeContractor
- We’ll tell you if it’s not worth repairing
- Colour mixed on the day to match
- One price list for the entire UK
See our full price list and guide to resurfacing and replacement costs.
Common problems we fix in Slitting Mill
Dropped items cause the majority of chips, and building work is a common culprit. Cracks in acrylic have a different cause: poor support underneath, so the bath flexes when it’s full.
Clients usually contact us about:
- Damage beneath the taps
- Scuffs and scratches in the surface
- Cracks in an acrylic bath
- Snagging damage from a refit
Comparing quotes
- How soon you can use it again
- Whether they match the colour on site
- How changes to the job are handled
- The length of the guarantee and what it covers
About our accreditations · Every repair comes with a one-year guarantee.
